This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Injection Pressure Influence on Diesel Engine Performance and Emissions
Annotation ability available
Sector:
Event:
SAE Brasil
Language:
English
Abstract
Authors
Topic
Citation
Wen, T., Ebeling, G., Marques, M., and Streck, R., "Injection Pressure Influence on Diesel Engine Performance and Emissions," SAE Technical Paper 921488, 1992, https://doi.org/10.4271/921488.Also In
References
- Alkidas, A.C. “Relationships Between Smoke Measurements and Particulate Measurements” SAE840212
- Monaghan, M.L. Pettifer H.F. “Air Motion and Its Effect on Diesel Performance and Emissions” SAE 810255
- Campbell, J. et al “The Effect of Fuel Injection Rate and Timing on the Physical, Chemical, and Biological Character of Particulate Emissions from a Direct Injection Diesel” SAE 810996
- Varde, K.S. et al “Spray Angle and Atomization in Diesel Sprays” SAE 841055
- Lida, N. Sato, G.T. “STudy on Characteristics of Particulate Emissions from a Direct Injection Diesel Engeine using a Freezing Method in Sampling Process.” SAE 841077
- Williams, T.J. Tindal, M.J. “Gas Flow Studies in Direct Injection Diesel Engines with Re-Entrant Combustion Chambers” SAE 800027
- Amann, C.A. et al “Some Rudiments of Diesel Particulate Emissions” SAE 800251
- Hiroyasu, H. et al “Soot Formation and Oxidation in Diesel Engines” SAE 800252
- Aoyagi, Y et al “A Gas Sampling Study on the Formation Processes of Soot and NO in a DI Diesel Engine.” SAE 800254
- Harvey, P.S. Gosman, A.D. “An Analysis of the Influence of Swirl on Combustion in DI Diesel Engine by Computer Simulation” SAE MEP-160, C130/82
- Kamimoto, T. et al “Soot Oxidation Rate in the Flame in a DI Diesel Engine.” - SAE MEP-160, C 103/82
- Uchida, N. et al “The Control of diesel Emissions by Supercharging and Varying Fuel-injection Parameters.” SAE 920117
- Kano, H. et al “Contribution of Optimum Design for Nozzle Configuration to Spray Formation.” SAE 900824
- Needham, J.R. et al “The Low NOx Truck Engine.” SAE 910731
- Kittelson, D.B. et al “Oxidation of Soot Agglomerates in a Direct Injection Diesel Engine.” SAE 920111
- Norris-Jones, S.R. et al “A Study of the Formation of Particulates in the Cylinder of a Direct Injection Diesel Engine.” SAE 840419
- Stumpp, G. et al “Fuel Injection Equipment for Heavy Duty Diesel Engines for U.S. 1991/1994 Emission Limits.” SAE 890851
- Wade, W.R. et al “Future Diesel Engine Combustion Systems for Low Emissions and High Fuel Economy.” SAE865012
- Van Gerpen, J.H. et al “The Effects of Swirl and Injection Parameters on Diesel Combustion and Heat Transfer.” SAE 850265
- Won, Y.H. et al “A Study on Soot Formation in Unsteady Spray Flames via 2-D Soot Imaging.” SAE 920114
- Shundoh, S. et al “The Effect of Injection Parameters and Swirl on Diesel Combustion With High Pressure Fuel Injection.” SAE 910489
- Miyamoto, N. Ogawa, H. “Analysis of Diesel Soot Formation under Varied Ignition Lag with a Laser Light Extinction Method.” SAE 900640
- Kono, S. et al “Prediction of In-Cylinder Flow and Spray Formation Effects on Combustion in Direct Injection Diesel Engines.” SAE 850108
- Oblnder, K. et al “The Influence of High Pressure Fuel Injection on Performance and Exhaust Emissions of a High Speed Direct Injection Diesel Engine.” SAE 890438
- Aoyama, T. et al “NOx Reduction by Injection Control” SAE 900637
- Greeves, G. Wang, C.H.T. “Origins of Diesel Particulate Mass Emission.” SAE 810260
- Yuan-Xian, Z. et al “Soot Formation, Oxidation and Its Mechanism in Different Combustion Systems and Smoke Emission Pattern in DI Diesel Engines.” SAE 910230
- Khan, I.M. et al “Factors Affecting Smoke and Gaseous Emissions from Direct Injaction Engines and a Method of Calculation.” SAE 730169
- Greeves, G. “Response of diesel Combustion Systems to Increase of Fuel Injection Rate.” SAE 790037
- Pipho, M.J. et al “NO2 Formation in a Diesel Engine.” SAE 910231
- Lange, W.W. “The Effect of Fuel Properties on Particulates Emissions in Heavy-Duty Truck Engeines Under Transient Operating Conditions.” SAE 912425
- Cartellieri, W.P. Herzog, P.L. “Swirl Supported or Ouiescent Combustion for 1990's Heavy-duty DI Diesel Engines - An Analysis.” SAE 880342
- Hardenberg, H. Wagner, W. 1971