This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Stochastic Model for Diesel Combustion Considering Some Turbulent Mixing Zones
Annotation ability available
Sector:
Language:
English
Abstract
A new model to describe diesel combustion process has been developed. In this model diesel combustion field is divided into two zones, premixing and combustion. Turbulent mixing process is described by the stochastic approach in each zone separately. Comparison of calculations with experimental results showed that this model can predict the entire course of heat release and nitrogen-oxide formation precisely, under wide-spread conditions. Two-dimensional flame temperature distributions in the combustion field by the two color method were compared with simulation results. Both the measured and the calculated flame temperature distributions showed good agreements with each other.
In the diesel combustion process, the injected fuel mixes with air entrained inside the spray. The mixture is thus formed, and ignites at several points. Random expansion of flamelets accelerates both mixing and combustion. Following this, fairly moderate diffusion combustion proceeds. Recent research works indicate that, the fuel droplet injected into the cylinder evaporates in a very short interval, especially in the case of high pressure injection and small nozzle hole diameter combinations (1)*. This suggests that the mixing process plays a dominant role in diesel combustion. The stochastic approach to describe the turbulent mixing process for diesel combustion was initially introduced by Ikegami and one of the authors (2) (3). This model expresses the heterogeneous nature of temperature and fuel concentration distributions by probability density functions (PDF), and describes the change of PDF for the more homogeneous states. Originally this model treated the combustion field after ignition as a macroscopically homogeneous (have the same PDF) state. On the basis of the results of combustion observation experiments, this original model has been modified.
Topic
Citation
Kakegawa, T., Shioji, M., Sakai, T., and Tsujimura, K., "Stochastic Model for Diesel Combustion Considering Some Turbulent Mixing Zones," SAE Technical Paper 920693, 1992, https://doi.org/10.4271/920693.Also In
References
- Kamimoto T. Yokota H. Kobayashi H. SAE paper 871610
- Ikegami M. Shioji M. et. al. 20th Symposium on combustion / The Combustion Inst. 1984 217
- Ikegami M. Shioji M. Kimoto T. SAE Trans. 97 Paper No. 880425 1989 715
- Shundoh S. Kakegawa T. et. al. SAE paper 910489
- Yamaguchi I. Nakahira T. et. al. SAE paper 901577
- Magnussen B. F. Proc. 15th Symp. (Int.) Combustion 1974 1415
- Wakuri Y. Fujii M. et. al. Bulletin of the JSME 25 156 1959 820
- Dent J. C. Mehta P. S. SAE paper 811235
- Ikegami M. Miwa K. et. al. Bulletin of the JSME 53 485 1987 274