This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Impact of Advanced Materials on Small Turbine Engines
Annotation ability available
Sector:
Language:
English
Abstract
This lecture assesses the impact of anticipated new turbine materials and processes on the small gas turbine of the late 20th and early 21st century. Cold-end and hot-end materials are reviewed. The materials are evaluated in terms of improvement potential, likelihood of successful introduction, and barriers thereto.
Recommended Content
Technical Paper | Garrett TPF351-20 Turboprop Fan Engine Development |
Technical Paper | Forecasting Engine and Airframe Development Cost |
Technical Paper | Single Lever Power Management of Turboprop Engines |
Authors
Topic
Citation
Mason, J., "The Impact of Advanced Materials on Small Turbine Engines," SAE Technical Paper 911207, 1991, https://doi.org/10.4271/911207.Also In
References
- Wallace, F. Blake “Turbine Technology-Materials Set the Pace” SAE SP-764 1988
- Vanco, M. Wintucky, W. Niedzwiecky, R. “An Overview of the Small Engine Technology (SECT) Studies” AIAA Paper No. 86-1542 AIAA/ASME/SAE/ASEE 22d Join Propulsion Conference Huntsville Alabama June 1986
- Larkin, T. Staton, D. Mongia, H. “Rotorcraft Propulsion for Year 2000 Plus” AIAA Paper No. 86-1543 AIAA/ASME/SAE/ASEE 22d Joint Propulsion Conference, Huntsville Alabama June 1986
- Kaehler, H. Schneider, W. “Small Engine Technology Payoffs for Future Commuter Aircraft” AIAAPaper No. 86-1544 AIAA/ASME/ SAE/ ASEE 22d Joint Propulsion Conference Huntsville Alabama June 1986
- Turk, M. Zeiner, P. “Advanced Technology Payoffs for Future Rotorcraft, Commuter Aircraft, Cruise Missile and APU Propulsion Systems” AIAA Paper No. 86-1545 AIAA/ASME/SAE/ASEE 22d Joint Propulsion Conference Huntsville Alabama June 1986
- Singh, B. Benstein, E. “Year 2000 Small Engine Technology Payoffs in Cruise Missiles” AIAA Paper No. 86-1546 AIAA/ASME/SAE/ ASEE 22d Join Propulsion Conference Huntsville Alabama June 1986
- Pampreen, R. “Engine Studies for Future Subsonic Cruise Missiles” AIAA Paper No. 86-1547 AIAA/ASME/SAE/ASEE 22d Joint Propulsion Conference Huntsville Alabama June 1986
- Early, M. Dawson, R. Zeiner, P. Turk, M. Benn, K. “Small Engine Component Technology (SECT) Study Final Report” March 1986 NASA CR-175078, AVSCOM TR-86-C-11, Garrett 21-5776-2A
- Pyle, T. Aldrich, D. “Garrett's Turboshaft Engines and Technologies for the 1990s” ASME Paper No. 90-GT-204 Gas Turbine and Aeroengine Conference June 1990 Brussels
- Miller, R. Dee “Garrett TPF351-20 Engine Flight Test and Ground Test Performance” SAE Paper 911011 SAE 1991 General Corporate, and Regional Aviation Meeting Wichita, KS April 1991
- Hill, L. Thomas, CR. Walker, E.J. “Advanced Carbon-Carbon Composites For Structural Applications” Proceedings of the International Conference Plastics Institute, London February 1974
- Hüttner, W. “Carbon_Carbon-an Inverse Composite Structure” 16 430 435 1985
- Smyth, J. “Advanced Gas Turbines” Garrett Auxiliary Power Division Report No. 31-9571 March 1991
- Baker, C.C. Baker, D.E. “Design Practices for Structural Ceramics in Automotive Turbine Wheels” Garrett Automotive Group, Allied-Signal, Inc. SAE Paper 890426
- Li, C.-W. Yamanis, J. Allied-Signal, Inc. “Super-Tough Silicon Nitride with R-Curve Behavior” Ceramic Engineering and Science Proceedings 10 7-8 632 645 1989 American Ceramic Society
- Li, C.-W. Yamanis, J. Whalen, P.J. Gadaska, C.J. Ballard, C.P. Allied-Signal, Inc. “In-Situ Reinforced Silicon Nitride Ceramics” Proceedings of the 37th Sycamore Materials Research Conference October 1990 Plymouth, MA. Materials Technology Laboratory Watertown, MA.
- Karasek, K.K. Bradley, S.A. Donner, J.T. Schienle, J.L. Yeh, H.C. “SiC Whisker Characterization: An Update” American Ceramic Society Bulletin 224 228 February 1991