This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Bake Hardening Steel Application Study - Key Factors of Dent Resistance Improvement
Annotation ability available
Sector:
Language:
English
Abstract
On exterior automotive body panels it is generally accepted that the substitution of a bake hardening, BH grade of steel for a drawing quality special killed, DQSK grade improves the dent resistance performance. However, the amount of performance improvement varies depending on the specific body panel and the loading conditions applied. The objective of this study was to quantify and define the key factors related to the dent resistance performance difference. Specifically, body panels of the same part and outer panel gage, one BH the other DQSK, were compared hased on the load required to produce a visible dent and the resulting dent depth. While the results were specific to the panel tested, the key factors to be considered when comparing BH and DQSK panels were identified.
Authors
Topic
Citation
Seel, T., "Bake Hardening Steel Application Study - Key Factors of Dent Resistance Improvement," SAE Technical Paper 910291, 1991, https://doi.org/10.4271/910291.Also In
References
- Zaccone D. C. Elger J. A. Michalak J. T. Armitage J. R. “Characteristics of Box-Annealed Bake-Hardenable Steels” SAE Technical Paper # 900714 March 1990 1
- Internal OEM Report “Door Quality Improvement Project” May 1989 Lab Reports - D419A, S419A, U419A, U505A, S505B
- Internal OEM Report “Door Quality Improvement Project” May 1989 Strain Analysis
- DiCello J. A. George R. A. “Design Criteria for Dent Resistance of Auto Body Panels” SAE Technical Paper# 740081 March 1974 7
- Yutori Y. Nomura S. Kokubo I. Ishigaki H. “Studies on Static Dent Resistance” June 1980 11th IDDRG Congress
- Alaniz C. L. Brookes L. E. Seel T. N. “Investigation of Body Panel Stiffness as Predicted by Finite Element Analysis” SAE Technical Paper 900716 March 1990
- Arkin Herbert Colton Raymond R. “Statistical Methods” Barnes & Noble Outline Series 1962 100 149
- Arkin Herbert Colton Raymond R. “Statistical Methods” Barnes & Noble Outline Series 1962 43
- DiCello J. A. George R. A. “Design Criteria for Dent Resistance of Auto Body Panels” SAE Technical Paper# 740081 March 1974 2
- Johnson T. E. Schaffnit W. O. “Dent Resistance of Cold-Rolled Low-Carbon Steel Sheet” SAE 730528 May 1973
- DiCello J. A. George R. A. “Design Criteria for Dent Resistance of Auto Body Panels” SAE Technical Paper# 740081 March 1974
- James M. L. Smith G. M. Wolford J. C. “Applied Numerical Methods for Digital Computation” Harper & Row 1977 183