This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mesh Stiffness and Transmission Error of Spur and Helical Gears
Annotation ability available
Sector:
Language:
English
Abstract
In this study, the combined mesh stiffness characteristics of involute spur and helical gears and their transmission errors due to tooth deflections under load are evaluated. The bending and shear deflections on the contact line of a gear tooth are obtained by the finite element method (using isoparametric plate elements), and the contact deflections are obtained using Hertzian contact theory and the equation of Weber and Banaschek. With these deflections, under the assumption of mathematically exact geometry, the mesh stiffness and compliance of a tooth pair are found using the so called flexibility method. Then using the mesh contact ratio and load sharing ratio, the combined mesh stiffness characteristics of a gear pair and their transmission errors due to the tooth deflections along the line of action are evaluated.
Recommended Content
Technical Paper | A Study on Optimum Tooth Modifications of Helical Gears Under Various Loads |
Technical Paper | SOME RECENT WORK ON UNCONVENTIONAL TRANSMISSIONS
|
Technical Paper | The Lynx Transmission and Conformal Gearing |
Authors
Topic
Citation
Choi, M. and David, J., "Mesh Stiffness and Transmission Error of Spur and Helical Gears," SAE Technical Paper 901764, 1990, https://doi.org/10.4271/901764.Also In
Dynamic Characteristics of TodayS Passenger Car Transmissions
Number: SP-0837; Published: 1990-09-01
Number: SP-0837; Published: 1990-09-01
References
- Buckingham, E. Analytical Mechanics of Gears 1 McGraw-Hill Book Company 1949
- Chakraborty, J. Hunashikatti, H. G. “Determination of the Combined Mesh Stiffness of a Spur Gear Pair under Load” ASME paper 74-DET-39 1974
- Choi, M. The Combined Mesh Stiffness Characteristics of Spur and Helical Gears Dept. of Mechanical and Aerospace Eng. North Carolina State Univ. Raleigh, N.C. Aug. 1987
- Cornell, R. W. “Compliance and Stress Sensitivity of Spur Gear Teeth” ASME paper 80-C2 / DET-24 1980
- Davis, A. W. “Marine Reduction Gearing” Proceedings of the Institution of Mechanical Engineers London 170 1956
- Gregory, R. W. Harris, S. L. Munro, R. G. “Dynamic Behavior of Spur Gears” Proceedings of the institution of Mechanical Engineers 178 8 1963-1964
- Hayashi, K. “Load Distribution on the Contact Line of Helical Gear Teeth (Part 1)” Bulletin of the JSME 6 22 1963
- Hayashi, K. Syama, T. “Load Distribution on the Contact Line of Helical Gear Teeth (Part 2)” Bulletin of the JSME 6 22 1963
- Houser, D. R. Seireg, A. “An Experimental Investigation of Dynamic Factors in Spur and Helical Gears” Transactions of the ASME, Journal of Engineering for Industry 72 1970
- Houser, D. R. “Research in the Gear Dynamics and Gear Noise Research Laboratory” SAE Technical paper series 821066 Sep. 1982
- Houser, D. R. Smigel, R. “Gear Load Distribution and Transmission Error Modeling” AGMA Technical paper Oct. 1983
- Houser, D. R. “Gear Noise Sources and their Prediction using Mathematical Models” OEM Conference Philadelphia, P.A. Sep. 1985
- Mabie, H. H. Ocvirk, F. W. Mechanisms and Dynamics of Machinery 3 John Wiley and Sons 1978
- Schmidt, G. R. Pinnekamp, W. Wunder, A. “Optimum Tooth Profile Correction of Helical Gears” ASME paper 80-C2 / DET-110 1980
- Seireg, A. Houser, D. R. “Evaluation of Dynamic Factors of Spur and Helical Gears” Transactions of the ASME, Journal of Engineering for Industry 92 1970
- Smith, J. D. Gears and their Vibration The Macmillan Press Ltd. 1983
- Terauchi, Y. Mori, H. “Comparison of Theories and Experimental Results for Surface Temperature of Spur Gear Teeth” ASME paper 72-PTG-7 1972
- Timoshenko, S. P. Goodier, J. N. Theory of Elasticity 3rd MacGraw-Hill Book Company 1970
- Umezawa, K. “Vibration of Power Transmission Helical Gear with Narrow Facewidth” ASME paper 84-DET-159 1984
- Wang, S. M. “Analysis of Non-Linear Transient Motion of a Geared Torsional” ASME paper 72-PTG-8 1972
- Weber, C. Banaschek, K. “Deformation and Profile Relief of Spur-Toothed and Helical Gear Wheels” 11 Friedr. Vieweg and Sohn Braunschweig 1953