This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimum Parameters of Spool Valve Feedback to Minimize Surge Pressure
Annotation ability available
Sector:
Language:
English
Abstract
This paper deals with the optimum design of the stiffness and damping coefficients of the spring and dashpot used in the feedback loop of a hydraulic servovalve, to attain minimum surge pressure during the stop and reverse operations. The proportional element of the feedback represented by the lever ratio is predefined. The state space equations are derived and two objective functions based on relative and absolute pressure rise are minimized. The applied minimization technique is based on a modified gradient method.The results show a better performance and less shocks due to the optimum design of that dynamic parameters.
Recommended Content
Citation
Awad, T. and Rezeka, S., "Optimum Parameters of Spool Valve Feedback to Minimize Surge Pressure," SAE Technical Paper 901620, 1990, https://doi.org/10.4271/901620.Also In
References
- McCloy, D. “Cavitation Effects in On-Off Controlled Hydraulic Servos” J. Dynamic Systems, Measurement, and Control Trans. of the ASME 50 56 March 1972
- Vilenius M.J. “The Application of Sensitivity Analysis to Electrohydraulic Position Control Servos” J. Dynamic System, Measurement, and Control ASME Trans. 105 77 82 June 1983
- Awad T. El-Gamal H. “The Effect of The Presence of an Air Bubble in a Hydraulic Servo-Motor on the Dynamic Response of a Control Loop” 3 rd PEDAC International Conference Alex. Univ. Dec. 1986
- Baysec S. Rees Jones J. “An Improved Model of an Electro-hydraulic Servo-Valve” The Theory of Machines and Mechanisms Proceedings of the 7 th Worl Congress Sevilla, Spain Sept. 1987
- McClamroch, N.H. “Displacement Control of Flexible Structures Using Electrohydraulic Servo-actuators” J. Dynamic Systems, Measurement, and Control ASME Trans 107 34 39 March 1985
- Finney, J.M. de Pennington, A. Bloor M.S. Gill G.s. “A Pole Assignment Controller for an Electrohydraulic Cylinder Drive” Journal Dynamic Systems, Measurement, and Control ASME Trans. 107 145 150 June 1985
- Edge, K.A. Figueredo, K.R.A. “Microprocessor-Based Model Reference Adaptive Control of an Electro-Hydraulic Servomechanism” SAE Paper No 891861 International Off-Highway and Power Plant Congress and Exposition Sept. 1989
- Lequoc, S. Cheng, R.M.H. Leung, K.H. “Frequency Response Analysis of a Novel Electrohydraulic Servosystem” ASME Paper 88-WA/DSC-52 Nov. 1988
- Yuwan, C. Shichang, Z. Xinming, C. “Optimal Control of Speed Conversion of a Valve Controlled Cylinder System” SAE Paper No 861291 International Off-Highway and Power Plant Congress and Exposition Sept. 1986
- McCloy, D. Martin, H.R. “The Control of Fluid Power” Longman Pub. 1973
- Merritt, H.E. “Hydraulic Control Systems” John Willy and Sons Inc. 1967
- Burrows, C.R. “Fluid Power Servomechanisms” New York 1972
- Zettel, G. 1970