This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Interfacial Control Between Phosphate Films and Electrodeposition Films on Coated Steels
Annotation ability available
Sector:
Language:
English
Abstract
Recently, many kinds of coated steels have been applied for automolile bodies due to their anti-corrosiveness. However, it is very important to control interfaces between phosphate films and electrodeposition films, or sometimes between phosphate films and coated steels, to maximize the properties of coated steels. Cationic electrodeposition has given an unprecedented rise to coating process of automobils bodies. With this method, interfacial control between phosphate films and electrodeposition films becomes a key point because of pH increase in cathodic body area during electrochemical reactions. Galvannealed steels are apt to generate craters in electrodeposition films according to voltage-current program. To suppress the film defect in itself is a kind of interfacial control between phosphate films, electro-deposition films and coated steels. In this paper, studies of interfacial control were carried out.
Recommended Content
Technical Paper | Mechanism of Cathodic Electrocoat Primer Cratering |
Technical Paper | Surface Coatings for Superior Gears |
Technical Paper | Surface Topography Changes Associated With Lüders Band Formation in Low Carbon Sheet Steels |
Authors
Citation
Sato, N., "Interfacial Control Between Phosphate Films and Electrodeposition Films on Coated Steels," SAE Technical Paper 900838, 1990, https://doi.org/10.4271/900838.Also In
References
- Sato N. “Effects of Heavy Metal Additions and Crystal Modification on the Zinc Phosphating of Electrogalvanized Steel Sheet” Surface and Coatings Technology 30 171 1987
- Sato N. Minami T. Kono H. “Study of the Relation between Modified Structure and Chemical Stability of Zinc Phosphate Crystal Film” The Journal of the Metal Finishing Society of Japan 38 571 1987
- Sato N. Morimoto K. Sugizaki K. “Influence of Zinc Phosphate Films on Deposition Process of Galvanostatic Electrodepostion” The Journal of the Surface Finishing Society of Japan 40 852 1989
- Sato N. Tanaka S. “Correlation between the Anti-cratering of Surface-treated Steels and the Change of Electric Currents during the Electrodeposition Coating” Journal of the Iron and Steel Institute of Japan 71 1343 1985
- Sato N. “Effects of Zinc Phosphating on Anti-cratering Properties of Steel Sheets in Electrodeposition Coatings” Journal of the Iron and Steel Institute of Japan 73 1004 1987
- Delcour J. “Electrodeposable Paint in the Automobile Industry” Doubleliason-Chimie des Peintures 35 28 1988
- Maeda S. Asai T. Okada H. “Factors that Control Paint Adhesion of Coated Metals on Water Immersion Test” Corrosion Engineering 31 268 1982
- Sato N. Minami T. Kono H. “Zinc Phosphating Method for Metal Surface” Japan Patent, Application No. 1-51927
- Sato N. “The Influence of Mn2+ Component on Forming Zinc Phosphate Crystals” The Journal of the Metal Finishing Society of Japan 37 758 1986
- Sato N. “Zinc Phosphating Crystal of Pre-surface Treated Steel of Automotive Industry” Corrosion Engineering 32 379 1983
- Sato N. “Chemical Component Analysis of Zinc Phosphate Crystal by Means of XPS and IMA Method,” The Journal of the Metal Finishing Society of Japan 38 30 1987
- Sato N. Minami T. “State Analysis of Zinc Phosphate Crystal by Electron Spin Resonance Method,” The Journal of the Metal Finishing Society of Japan 38 108 1987
- Sato N. Minami T. “State Analysis of Zinc Phosphate Crystal by Auger Electron Spectroscopy Method” The Journal of the Metal Finishing Society of Japan 38 149 1987
- Sato N. Minami T. “State Analysis of Nickel Components in Zinc Phosphate Crystals by Electron Spin Resonance” Journal of the Chemical Society of Japan 1987 1741 1987
- Sato N. Minami T. Kono H. “Analysis of Metallic Components in Zinc Phosphate Films Using Electron Spin Resonance and X-ray Fluorescence” Surface and Coatings Technology 37 23 1989
- Minami T. Sato N. “Analysis of Paramagnetic Transition Metal Components in Hopeite Films by ESR” Journal of The Surface Science Society of Japan 9 459 1988
- Sato N. Minami T. “The Influence of Metal Components Composition in Zinc Phosphate Films on Laser Raman Spectrum” Journal of the Chemical Society of Japan 1988 1891 1988
- Sato N. Minami T. “Influence of Metal Components in Hopeite Films on IR and Laser Raman Spectra” Journal of Materials Science 24 3375 1989
- Minami T. Sato N. “The Structural Modification of Hopeite Crystal Films by Manganese Components and Their XANES and EXAFS” Journal of the Chemical Society of Japan 1988 1727 1988
- Sato N. “Structural Analysis of Hopeite Crystals by Means of Curve Fitting Method of EXAFS” Journal of the Chemical Society of Japan 1989 1724 1989
- Sato N. “Laser Raman Spectra for Solid and Liquid States of Hopeite Crystal Films” The Journal of the Surface Finishing Society of Japan 40 933 1989
- Sato N. “State Analysis of Zinc Phosphate Films Formed on Coated Steel Sheets” Journal of the Iron and Steel Institute of Japan 75 723 1989
- Sato N. “Study for Characterization of Zinc Phosphate Films Films and Steel Sheets on Automobile Bodies” Doctoral Thesis, The University of Tokyo 1988
- Kojima R. Okada M. Okita H. “Phosphatizing on Steel” Corrosion Engineering 30 580 1981
- Sato N. “Characterization of Zinc Phosphate Films on Zinc Alloy Coated Steels” Proceedings of The International Confernece on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH '89) 214 1989 Tokyo
- Sato N. “Modern Zinc Phosphate Films on Zinc Coated Steels” Proceedings of The Fifth International Pacific Conference on Antomotive Engineering (IPC-5) 1989 Beijing
- Hart R.G. Townsend H.E. “Mechanism of Cathodic Electrocoat Primer Cratering” SAE paper, 831818 1983
- Kitayama M. Azami T. Miura N. Ogasawara T. “Cratering in Electrodeposition Coating of Cathodic Paint on Galvannealed Steel Sheet” Transactions Iron and Steel Institute of Japan 2 742 1984
- Hart R.G. “Factors Influencing Cathodic E-Coat Primer Cratering on Zinc-Rich Surfaces” SAE paper, 850237 1985
- Coon C.L. Vincent J.J. “Paintability of Precoated Metals with Cathodic Electrocoat Primer” SAE paper 850466 1985
- Coon C.L. Vincent J.J. “Processing Parameters Influencing Paintability of Precoated Metals with Cathodic Electrocoat Primer” Journal of Coating Technology 58 53 1986
- Schoff C.K. Chen H.J. “Cationic Electrodeposition Primers over Zinc Coated Steels. Part 1: Effect of Voltage and Substrates on Coating Quality” Journal of Oil Colour Chemists Association 68 185 1985
- Sato N. Tanaka S. “Cratering Phenomena in Cationic Electrodeposition Coating and Surface Properties of Surface-treated Steel Sheets” Coatings Technology 20 138 1985