This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Automotive Under-the=Hood Applications in Vinyl Ester Resin SMC/BMC
ISSN: 0148-7191, e-ISSN: 2688-3627
Published February 01, 1990 by SAE International in United States
Annotation ability available
Under-the-hood components with composites are currently making headway in the automotive arena. The corrosive environment these components are often exposed to, such as elevated temperature motor oil, is an important design consideration; however, as yet there is little commercial experience on the performance of composites under such conditions. This study investigates the effects of hot (160°C) “used” motor oil on vinyl ester glass fiber reinforced sheet molding compound (SMC) materials, simulating an extremely accelerated aging process indicative of under-the-hood conditions. Several SMC formulations were examined which varied in resin identity, filler type, and filler loading. All materials were evaluated for changes in appearance, weight and thickness, flexural properties, and thermal performance at one, three, and six month intervals.
In addition to harsh environmental conditions, engine components must exhibit some degree of flame retardance. Although the automotive industry as yet has set no specific standards to evaluate this material property, this paper examines the flammability resistance of vinyl ester composites using the UL 94 burn test. Again, SMC compounds varying in resin and in filler type and loading were examined. Specifically, alumina trihydrate, a widely used filler for flame control, was compared to calcium sulfate dihydrate, a less expensive filler often cited for its flame and smoke resistance.
Composites must do more than just match the performance of traditional materials in order to become the material of choice for selected engine compartment components - automotive engineers mandate they must out-perform conventional materials to warrant their developmental time, effort, and expense. Composites not only can withstand the same excessive heat and corrosive environments metals see under-the-hood, they surpass metals in areas such as pricing through reduced manufacturing costs and weight reduction, design flexibility, and acoustic emissions. This paper will also examine these effects on the total engine performance of a specific passenger car engine.
CitationWinkler, M., "Automotive Under-the=Hood Applications in Vinyl Ester Resin SMC/BMC," SAE Technical Paper 900633, 1990, https://doi.org/10.4271/900633.
SAE Transactions Journal of Materials and Manufacturing
Number: V99-5; Published: 1991-09-01
Number: V99-5; Published: 1991-09-01
- Miller Bernie Plastics World May 1988 40 42
- “Plastic Motor Oil Pan for the Porsche 944 - Fundamental Research on Prototype Components,” Porsche 1988
- Ferrarini J. Longenecker D. Shah N. Feltzin J. Greth G. “Development of a Unique Method for the Preparation of High Quality SMC,” Proceedings from the 33rd Annual Technical Conference 1978 Reinforced Plastics/Composite Institute, The Society of the Plastics Industry, Inc.
- Alcoa Chemicals for Polymers Technical Bulletin #850 1 Alcoa Chemicals Division 1985
- Adams R. “Characterization of Calcium Sulfate Extended Polyester Resin,” Proceedings from the 43rd Annual Technical Conference 1988 Reinforced Plastics/Composite Institute, The Society of the Plastics Industry, Inc.
- “Standard Paractice for Determining Chemical Resistance of Thermosetting Resins Used in Glass Fiber Reinforced Structures Intended For Liquid Service,” Annual Book of ASTM Standards 8 1984
- Tests for Flammability of Plastic Materials for Parts in Devices and Appliances Third Underwriters Laboratories 1980