This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Feasibility of Alcohol-Dodecane Mixtures for Heterogeneous Combustion Systems
Annotation ability available
Sector:
Language:
English
Abstract
A general model, which uses general equations to determine the thermophysical properties of fuels in terms of temperature, molecular mess, critical constants and molecular structure, has been developed to describe the evaporation characteristics of multicomponent fuel droplets according to both the shell and ideal solution postulates. Upon applying this model to alcohol-dodecone mixtures, the feasibility of such mixtures for heterogeneous combustion systems has been assessed, and feasibility charts have been developed.
Citation
Saeed, M., Megahed, M., Sorour, M., and Madi, M., "Feasibility of Alcohol-Dodecane Mixtures for Heterogeneous Combustion Systems," SAE Technical Paper 891882, 1989, https://doi.org/10.4271/891882.Also In
References
- Saeed, M.N. “Combustion Characteristics of Neat Ethanol and Blends of Ethanol and Diesel Fuel Number Two in a Direct-Injection Diesel Engine,” Ph.D. Dissertation Wayne State University 1984
- Saeed, M.N. Henein, N.A. “Physical Ignition Delay for Ethcnol Droplets in Diesel Engines,” ASME Paper 87-Pet-4 1987
- Megahed, M.M. “Evaporation of Multi-component Fuel Droplets as Applied to Alcohol-Dodecane Mixtures,” M.Sc. Dissertation Alexandria University 1988
- Shirvani, H. Goering, C.E. Sorenson S.C. “Performance of Alcohol Blends in Diesel Engines,” SAE Paper No. 810681 1981
- Haepp, H.J. Truong, H.S. “The Effect of Methanol/Diesel Fuel Emulsions on the Mixture Formation in Direct-Injection Diesel Engines: A Theory on Spontaneous Evaporation,” SAE Paper No. 830376 1983
- Johnson, R.T. Stoffer, J.O. “Performance of Stabilized Diesel Fuels Containing Alcohols and Water in Single and Multi-Cylinder Direct Injection Engines,” SAE Paper No. 830557 1983
- Lasheras, J.C. Kennedy, I.M. Dryer, F.L. “Burning of Distillate Fuel Droplets Containing Alcohol or Water; Effect of Additive Concentration,” Combustion Science and Technology 26 161 169 1981
- El-Wakil, M.M. Myers, P.S. Uyehora, O.A. “Fuel Vaporization and Ignition Lag in Diesel Combustion,” SAE Trans. 64 712 729 1956
- Henein, N.A. “A Mathematical Model for the Mass Transfer and Combustible Mixture Formation Around Fuel Droplets,” SAE Paper No. 710221 1971
- Hiroyasu, H. Kadota, T. Sendo, T. Imamoto, T. “Evaporation of a Single Droplet at Elevated Pressures and Temperatures (Experimental Study),” Translated from ASME Trans. 40 3147 1974
- Law, C.K. “Recent Advances in Multicomponent and Propellent Droplet Vaporization and Combustion,” ASME 86-WA/HT-14 1986
- Wong, C.H. Lin, X.Q. Law, C.K. “Combustion enc Microexplosion of Freely Felling Multicomponent Droplets,” Combustion and Flame 56 175 197 1984
- Law, C.K. “Multicomponent Droplet Combustion with Rapid Internal Mixing,” Combustion and Flame 26 219 233 1976
- Law, C.K. “Internal Boiling and Superheating in Vaporizing Multicomponent Droplets,” AIChE J. 24 4 626 632 July 1978
- Blander, M. Katz, J.L. “Bubble Nucleation in Liquids,” AIChE J. 21 5 833 848 September 1975
- Wassiljewo, A Physik, Z 5 737 1904
- Dryer, F.L. “Water Addition to Practical Combustion Systems-Concepts and Application,” 16th Symposium (Intl.) on Combustion 1976
- Reid, R.C. Prausnitz, Z.M. Sherwood, T.K. “The Properties of Gases and Liquids,” 3rd McGraw-Hill N.Y. 1977
- Wang, C.H. Law, C.K. “Microexplosion of Fuel Droplets Under High Pressure,” Combustion and Flame 59 53 62 1985
- El-Wakil, M.M. Uyehora, O.A. Myers, P.S. “A Theoretical Investigation of the Heating-up Period of Injected Fuel Droplets Vaporizing in Air,” NACA Tech Note 3179 1954
- Faeth, G.M. “The Kinetics of Droplet Ignition in a Quiescent Air Environment,” Ph.D. Dissertation The Pennsylvania State University 1964
- Saeed, M.N. “An Exact Solution to the Unsteady Mass Diffusion of Vaporizing Liquid Fuel Drops,” ASME Paper 86-WA/FACT-7 1986
- Megahed, M.M. Saeed, M.N. Sorour, M.M. Madi, M.B. “Unsteady Vaporization of Stationary Dodecane and Alcohol Droplets Suspended in a Hot Non-reactive Environment,” Int J Heat Mass Transfer 32 7 1299 1307 1989
- El-Wakil, M.M. Abdou, M.I. “The Self Ignition of Fuel Drops in Heated Air Streams,” SAE Preprint No. 598 B 1962
- Kobayasi, K. “An Experimental Study on the Combustion of a Fuel Droplet,” Fifth Symp (Intl) on Combustion 141 148 1954
- Nishiwcki, N. “Kinetics of Liquid Combustion Processes: Evaporation and Ignition Lag of Fuel Droplets,” Fifth Symp (Intl) on Combustion 148 158 1954
- Yu, T.C. Uyehara, O.A. Myers, P.S. Collins, R.N. Mahadevan, K. “Physical and Chemical Ignition Delay in an Operating Diesel Engine Using the Hot-Motored Technique,” SAE Trans 64 690 702 1956
- De Boer, P.C.T. “Droplet Burning and Evaporation Times for Distillate and Residual Fuel Oils,” ASME Paper 80-GT-59 1980
- Tsao, K.C. Myers, P.S. Uyehara, O.A. “Gas Temperatures during Compression in Motored and Fired Diesel Engines,” SAE Trans 70 136 145 1962
- Parker, T.E. Forsha, M.D. Stewart, H.E. Ham, K. Sawyer, R.F. Oppenheim, A.K. “Induction Period for Ignition of Fuel Sprays at High Temperatures and Pressures,” SAE paper 850087 1985
- Henein, N.A. Lee, C.S. “Autoignition and Combustion of Fuels in Diesel Engines Under Low Ambient Temperatures,” SAE paper 861230 1986
- Henein, N.A. “Cetane Scales Function, Problems and Possible Solutions,” SAE paper 870584 1987