This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Plastic Media Training Requirements and Supporting Technical Data
Annotation ability available
Sector:
Language:
English
Abstract
It has been demonstrated in practice that inadequate training and/or process requirements have produced conflicting results. The purpose of this paper is to outline an acceptable training program in use by commercial airlines and the military. It may not be the only program in use, but it should be representative of what is required to enable plastic media blast (PMB) to become a viable process for commercial aviation processing as well as military or other industry applications. In addition attempts are made to document in bibliographical sequence test data supporting plastic media blast process applications. The objective again is to produce data supporting the viability of plastic media blast processing. As well as data already existing, we have included data currently being collected that may or may not support plastic media blast processing.
Authors
Citation
Pauli, R. and Owens, C., "Plastic Media Training Requirements and Supporting Technical Data," SAE Technical Paper 880865, 1988, https://doi.org/10.4271/880865.Also In
References
- SAE Technical Paper 870741 PLASTIC MEDIA DRY STRIPPING - TWO YEARS LATER Pauli Robert Pauli & Griffin Company 23rd Annual Aerospace/Airline Plating and Metal Finishing Forum & Exposition Jacksonville, Florida February 16-19 1987
- AM-TECH ′87 Presentation Dallas, Texas March 1987 Bruce Thompson
- Boeing Vertol Engineering Materials Laboratory Report #86-88/ August 19 1986
- PAINT REMOVAL BY PLASTIC GRIT BLASTING Eberhard Durig, MBB Hamburg, Federal Republic of Germany October 1986
- PRAM PROJECT: PAINT STRIPPING OF F-4 AIRCRAFT & COMPONENT PARTS USING MECHANICAL METHODS August 28 1986
- Air Canada MATERIALS & PROCESS ENGINEERING LABORATORY REPORT #3927 October 24 1985
- Report M&ME-TS441Ak-85M-171 attachment to METHODS FOR MECHANICALLY REMOVING PAINT FROM AIRCRAFT SURFACES Grumman Corp. Robotics International/S.M.E. Meeting Orlando, Florida March 3-5 1986
- PLASTIC MEDIA BLAST (PMB) AT CORPUS CHRISTI ARMY DEPOT John B. Bullington/Randy Williams August 1985
- IMPLEMENTATION OF PLASTIC MEDIA BLASTING ON ROTARY WING AIRCRAFT AT CORPUS CHRISTI ARMY DEPOT. TIME AND LABOR SAVINGS. ECONOMIC JUSTIFICATION Williams Randy Dry Stripping Seminar Atlanta, Georgia September 1985
- SDSCC-QLM Report #84M0404 Corpus Christi Army Depot Engineering Branch 54B00 June 14 1984
- Hill AFB Metallurgical Report 2397-85 EFFECTS OF PLASTIC BEAD BLASTING FOR PAINT REMOVAL ON MAGNESIUM AND ALUMINUM AIRCRAFT September 27 1985
- Wright-Patterson AFB Report MLS-84-26 THE EFFECT OF PLASTIC MEDIA BLASTING ON FUEL CELL CAVITY STRUCTURAL FATIGUE PROPERTIES March 26 1984
- Douglas Aircraft Company of Canada, Ltd. Materials & Process Engineering Laboratory Report #MP-1675-85 PAINT STRIPPING BY PLASTIC BEAD BLASTING June 2 1985
- Boeing Vertol Division FLUORESCENT PENETRANT DETECTION OF FATIGUE CRACKS AFTER PLASTIC BEAD PAINT REMOVAL Report #8516 8427 December 12 1985
- NARF Alameda Laboratory Report #286-016 PLASTIC MEDIA BLASTING
- NARF Pensacola Report COATING REMOVAL VIA PLASTIC MEDIA BLASTING August 29 1984
- NARF Jacksonville Laboratory Report #2-84 July 23 1984
- NARF North Island PRELIMINARY REPORT ON PLASTIC MEDIA PAINT STRIPPING FROM METALLIC SURFACES NESO Materials Engineering Laboratory April 23 1984
- PLASTIC BEAD BLAST MATERIALS CHARACTERIZATION STUDY Battelle Columbus Division Final Engineering Report for Period October 1985 to July 1986 July 1986
- TRI-SERVICE ADVANCED COATINGS REMOVAL CONFERENCE January 13-14 1987
- PLASTIC BEAD BLASTING MATERIALS CHARACTERIZATION STUDY FOLLOW-ON REPORT Battelle Columbus Division Engineering Report November 13 1987
- Lab Report 85-87 dated July 22, 1985 attachment to METHODS FOR MECHANICALLY REMOVING PAINT FROM AIRCRAFT SURFACES Grumman Corporation from Robotics International/S.M.E. Meeting Orlando, Florida March 3-5 1986
- Wright-Patterson AFB Memorandum PLASTIC BEAD STRIPPING PLAN Green Robert P. August 9 1984
- NARF Alameda Laboratory Report # 286-016 PLASTIC MEDIA BLASTING
- NARF Alameda Memorandum PROGRESS REPORT NO. 2 ON PLASTIC BLASTING MEDIA March 22 1984
- NARF North Island PRELIMINARY REPORT ON PLASTIC MEDIA PAINT STRIPPING FROM GRAPHITE/EPOXY SURFACES March 19 1984
- Boeing Manufacturing Development Report #6-35081 COMPOSITE PAINT STRIPPING DEVELOPMENT May 1985
- NARF Cherry Point MATERIALS ENGINEERING DIVISION LABORATORY REPORT NO. 2218-86 October 31 1986
- USE OF PLASTIC MEDIA BLAST (PMB) ON COMPOSITE SURFACES Association of Singapore Licensed Aircraft Engineers (ASLAE) Asian Aerospace Conference Singapore January 28-29 1988