This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
High Strength Steels for Wheel Use
Annotation ability available
Sector:
Language:
English
Abstract
During the past few years, an application of high strength steels to wheels of passenger cars has been developed. Two big problems associated with the materials were noted with attempts to apply the high strength steels to wheels. One relates to properties required for wheel use and other relates to consistency of the properties. Reserch on the properties required for wheel use revealed that good formability is required for disc use materials and good formability both at base metal and flash-butt welded portion is required for rim use materials. It was found that good consistency of the mechanical properties over the entire portion of a coil and among coils is very important to reduce scrap ratio in wheel manufacturing process. Based on the results, high strength steels for wheel use were developed. This paper describes the properties and manufacturing process of the steels.
Recommended Content
Technical Paper | Spot Weldability and Fatigue Property of Hot-Rolled High-Strength Sheet Steels for Wheel Usage |
Technical Paper | Aluminum Wheel Styling at the Component Supplier Level |
Technical Paper | Force Response during Tire Tread Detachment Event |
Authors
Citation
Irie, T., Tsunoyama, K., Shinozaki, M., Kato, T. et al., "High Strength Steels for Wheel Use," SAE Technical Paper 880695, 1988, https://doi.org/10.4271/880695.Also In
References
- Ohashi M. “Future Trend of Automobile and the High Strength Steel” Tetsu-to-Hagane 68 1982 9 1136
- Kato T. Hashiguchi K. Takahashi I. Irie T. Ohashi N. “Development of As-hot-rolled Dual-phase Steel Sheet” 199 220 “Fundamentals of Dual-Phase Steels” AIME New-York, N.Y. 1981
- Irie T. Kato T. Tosaka A. Shinozaki M. Hashiguchi K. “Phosphorus-Added Hot-Rolled High Strength Sheet Steel with Low Yield-to-Tensile Strength Ratio” SAE Paper No. 850118
- Shinozaki M. Matsumoto Y. Kato T. Nishida M. Sudo N. “Development of High Strength Steel Sheets for Wheel Rim Use” SAE Paper No. 830279
- Kato T. Shinozaki M. Tsunoyama K. Irie T. Aoyagi N. “Properties of Newly-Developed Hot-rolled High-Strength Sheet with Phosphorus” Proceedings of the Second IAVD Congress on Vehicle Design and Components Geneve March 1985
- Mano J. Kato T. Aoyagi N. Kuwagata M. “Production of As-Hot-Rolled Dual Phase Steel Sheets by Controlled Cooling” 1983 International Conference on Technology and Applications of High Strength Low Alloy (HSLA) Steels Philadelphia, PA October 1983
- Nagai J. Suzuki K. Kojima S. “Steel Flow Control in a High Speed Continuous Slab Caster Using an Electromagnetic Brake” Iron and Steel Engineer May 1984 41
- Miyake Y. Yarita I. Hamada K. Hirose Y. Ogawa Y. Toyoshima K. “Development of Hot Rolling Technology for Improving Strip Profile and Flatness” Kawasaki Steel Technical Report 12 July 1985