This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of Flame Development and Engine Performance with Breakdown Ignition Systems in a Visualization Engine
Annotation ability available
Sector:
Language:
English
Abstract
A conventional coil ignition system and two breakdown ignition systems with different electrode configurations were compared in M.I.T.'s transparent square piston engine. The purpose was to gain a deeper understanding of how the breakdown and glow discharge phases affect flame development and engine performance. The engine was operated with a standard intake valve and with a shrouded intake valve to vary the characteristic burning rate of the engine. Cylinder pressure data were used to characterize the ignition-system performance. A newly developed schlieren system which provides two orthogonal views of the developing flame was used to define the initial flame growth process.
The study shows that ignition systems with higher breakdown energy achieve a faster flame growth during the first 0.5 ms after spark onset for all conditions studied. However, the extent to which this translates into a reduction in the duration of initial flame development period (the period from 0% to 10% mass burned) was found to be strongly dependent on the operating conditions and combustion characteristics of the engine. For the faster-burning case with shrouded intake valve, the benefits of the higher breakdown energy ceased to be significant under very lean conditions where the glow discharge ignition phase appears to play a more important role.
Recommended Content
Authors
Citation
Pischinger, S. and Heywood, J., "A Study of Flame Development and Engine Performance with Breakdown Ignition Systems in a Visualization Engine," SAE Technical Paper 880518, 1988, https://doi.org/10.4271/880518.Also In
References
- Kuroda, H. Nakajima, Y. SugihaTa, K. Takagi, Y. Muranaka, S. “The Fast Burn with Heavy EGR, New Approach for Low NOx and Improved Fuel Economy,” SAE Paper 780006 , SAE Trans. Vol. 87 1978
- Durbin, E.J. Tsai, K.C. “Extending the Lean Limit Operation of an SI Engine with a Multiple Electrode Spark Plug,” SAE Paper 830476 1983
- Noguchi, M. Sanda, S. Nakamura, N. “Development of Toyota Lean Burn Engine,” SAE Paper 760757 , SAE Trans. Vol. 85 1976
- Brandstetter, W.R Decker, G. Reichel, K. “The Water-Cooled Volkswagen PCI-Stratified Charge Engine,” SAE Paper 750869 , SAE Trans. Vol. 84 1975
- Date, T. Yagi, S. Ishizuya, A. Fujii, I. “Research and Development of the Honda CVCC Engine,” SAE Paper 740605 1974
- Latsch, R “The Swirl-Chamber Spark Plug: A Means of Faster, More Uniform Energy Conversion in the Spark-Ignition Engine,” SAE Paper 840455 , SAE Trans. Vol. 93 1984
- Tanuma, T. Sasaki, K. Kaneko, T. Kawasaki, H. “Ignition, Combustion, and Exhaust Emissions of Lean Mixtures in Automotive Spark Ignition Engines,” SAE Paper 710159 , SAE Trans. Vol. 80 1971
- Ziegler, G.F.W Wagner, E.P. Maly, R.R. “Ignition of Lean Methane-Air Mixtures by High Pressure Glow and Arc Discharges,” 20th Symposium (International) on Combustion 1983
- Kalghatgi, G.T. “Improvements in Early Flame Development in a Spark Ignition Engine Brought About by ‘Spark-Aider’ Fuel Additives,” Combustion Science and Technology Vol. 52 427 1987
- Nakai, M. Nagakawa, Y. Hamai, K. Sone, M. “Stabilized Combustion in a Spark Ignited Engine through a Long Spark Duration” SAE paper 850075 1985
- Anderson, R.W. Asik, J.R. “Lean Air-Fuel Ignition System Comparison in a Fast-Burn Engine,” SAE Paper 850076 1985
- Bertling, H Schwarz, H “Requirements for Ignitions Systems with Respect to the Inflammation of Lean Mixtures,” Automobiltechnische Zeitschrift (ATZ) 80 1978 4
- Schwarz, H. “Ignitions Systems for Lean Burn Engines,” Paper C95/79, Proceedings of Conference on Fuel Economy and Emissions of Lean Burn Engines, I. Mech. E. 87 96 London June 1979
- Maly, R. Saggau, B. Wagner, E. Ziegler, G. “Prospects of Ignition Enhancement,” SAE Paper 830478 , SAE Trans Vol. 92 1983
- Ziegler, G.F.W. Wagner, E.P. Saggau., B. Maly, R.R. Herden, W. “Influence of a Breakdown Ignition System on Performance and Emission Characteristics,” SAE Paper 840992 , SAE Trans. Vol. 93 1984
- Anderson, R.W. “The Effect of Ignition System Power on Fast Burn Engine Combustion,” SAE Paper 870549 1987
- Edwards, C.F. Oppenheim, A.K. Dale, J.D. “A Comparative Study of Plasma Ignition Systems,” SAE Paper 830479 1983
- Kupe, J. Wilhelmi, H. Adams, W. “Operational Characteristics of a Lean Burn Si-Engine: Comparison Between Plasma-Jet and Conventional Ignition System,” SAE Paper 870608 1987
- Albrecht, H. Bloss, W.H. Herden, W. Maly, R. Saggau, B. Wagner, E. “New Aspects on Spark Ignition,” SAE Paper 770853 1977
- Maly, R. Vogel, R. “Initiation and Propagation of Flame Fronts in Lean CH4-Air Mixtures by the Three Modes of Ignition Spark,” Seventeenth Symposium (International) on Combustion Combustion Institute 821 1979
- Maly, R. “Spark Ignition: Its Physics and Effect on the Internal Combustion Engine,” Fuel Economy: Road Vehicles Powered by Spark-Ignition Engine Hillard J. C. Springer G. S. Plenum Press NY 1985
- Namazian, M. Hansen, S.P Lyford-Pike, E.J. Sanches-Barsse, J. Heywood, J.B. Rife, J. “Schlieren Visualiation of the Flow and Density Fields in the Cylinder of a Spark-Ignition Engine,” SAE Paper 800044 , SAE Trans. Vol. 89 1980
- Gatowski, J.A. Heywood, J.B. Deleplace, C. “Flame Photographs in a Spark-Ignition Engine,” Combustion and Flame Vol. 56 71 81 1984
- Heywood, J.B. Vilchis, F.R. “Comparison of Flame Development in a Spark-Ignition Engine Fueled with Propane and Hydrogen,” Combustion Science and Technology Vol. 38 313 324 1984
- Gatowski, J.A. Balles, E.N. Chun, K.M. Nelson, F.E. Ekchian, J.A. Heywood, J.B. “Heat Release Analysis of Engine Pressure Data,” SAE Paper 841359 , SAE Trans. Vol. 93 1984
- Quader, A.A. “What Limits Lean Operation in Spark Ignition Engines - Flame Initiation or Propagation?.” SAE Paper 760760 , SAE Trans. Vol. 85 1976
- Tagalian, J. Heywood, J. B. “Flame Initiation in a Spark Ignition Engine,” Combustion and Flame Vol. 64 243 246 1986
- Metghalchi, M. Keck, J.C. “Laminar Burning Velocity of Propane-Air Mixtures at High Temperatures and Pressure,” Combustion and Flame Vol. 38 143 154 1980
- Metghalchi, M. Keck, J.C. “Burning Velocities of Mixtures of Air with Methanol, Isooctane, and Indolene at High Pressure and Temperature,” Combustion and Flame Vol. 48 191 210 1982
- Keck, J.C. Heywood, J.B. Noske, G. “Early Flame Development and Burning Rates in Spark Ignition Engines and Their Cyclic Variability,” SAE Paper 870164 1987
- Refael, S. Sher, E. “A Theoretical Study of the Ignition of a Reactive Medium by Means of an Electrical Discharge,” Combustion and Flame Vol. 59 17 30 1985
- Sher, E. Keck, J.C. “Spark Ignition of Combustible Mixtures,” Combustion and Flame Vol. 66 17 25 1986