This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Formability Criteria for Selecting Sheet Metal Lubricants
Annotation ability available
Sector:
Language:
English
Abstract
The proliferation of new coated steels, primarily zinc-based, has highlighted the need for understanding the interactions among the components of the forming system - part design, die design, material, lubrication, and press. Specialized laboratory tests have recently emerged to duplicate and measure quantitatively the sum of these interactions as a function of different lubrication conditions. The coefficients of friction derived from the DBS (Draw Beam Simulator) and the DF (Dome Friction) tests are used in this paper to document a number of system interactions. The results from these simulative friction tests are confirmed by experiments conducted on a highly instrumented, laboratory controlled, test pan die. The conclusion is reached that press shop needs are best met by use of a single lubricant which is insensitive to other components of the forming system.
Recommended Content
Technical Paper | Prelubes in Automotive Applications |
Technical Paper | Improved Metal Stamping Lubricant Testing Using Controlled Formed Panels |
Technical Paper | Effect of Global and Local Stiffness on Blankholder Pressure in Draw Die Forming |
Authors
Citation
Keeler, S., Nine, H., and Siekirk, J., "Formability Criteria for Selecting Sheet Metal Lubricants," SAE Technical Paper 880366, 1988, https://doi.org/10.4271/880366.Also In
References
- Keeler, S. P. “Sheet Metal Stamping Technology - Need for Fundamental Understanding,” Mechanics of Sheet Metal Forming - Material Behavior and Deformation Analysis , General Motors Research Symposium Koistinen Wang, Plenum Press New York, NY 1978
- Siekirk, J. F. “Process Variable Effects on Sheet Metal Quality,” Journal of Applied Metalworking 4 No. 3 July 1986 262 269
- American Iron and Steel Institute Sheet Steel Formability AISI Washington, DC 1984
- Keeler, S. P. “Automotive Sheet Metal Formability - A State of the Art Review,” AISI Washington, DC 1988
- Duncan, J. L. Sowerby and R. Chu, E. “The Development of Sheet Metal Modeling,” (keynote paper) Computer Modeling of Sheet Metal Forming Processes: Theory, Verification and Application Wang Tang, The Metallurgical Society of AIME Warrendale, PA 1986 1 11
- Kokonen, V. “Modeling of Forming Processes for Tool Design and Manufacturing at Volvo,” Computer Modeling of Sheet Metal Forming Processes: Theory, Verification, and Application Wang Tang, The Metallurgical Society of AIME Warrendale, PA 1986 13 20
- Berland, J. Detraux, J. M. Horkay, F. Jalinier, J. M. Manh, C. “The Simulation of the Sheet Metal Forming Process Using Numerical Models of Increasing Complexity,” Proceedings of the 14 th Biennial Congress of the IDDRG Koln, Germany April 21–23 1986 341 352
- Wang N. Tang, S. Computer Modeling of Sheet Metal Forming Frocesses: Theory, Verification, and Application Wang Tang, The Metallurgical Society of AIME Warrendale, PA 1986
- Wojtowicz, W. J. Lubrication Engineering 11 1955 174 177
- Ike, H. Yoshida, K. Murakawa, Wear, 72 1981 143 155
- Miyauchi, K. Furubayashi, T. Herai, T. Sudo, C. Sheet Metal and Formability , Proceeding of the 10 th Biennial Congress of the IDDRG Portcullis Press Redhill, Surrey, England 1975 287 301
- Gibson, T. J. Hobbs, R. M. Stewart P. D. International Conference Product Technology Institution of Engineers Melbourne, Australia 1974 328 332
- American Deep Drawing Group Sheet Metal Industries 54 1977 147 153
- Littlewood M. Wallace, J. P. Sheet Metal Industries 41 1964 925 930
- Woska, R. Bander Bleche Rohre 20 1979 562 564
- Goege E. Witthuser K. P. HFF-Berichts UKH, Geseltschaft fur Produktionstechnik Hanover, Germany 1977 129 137
- Duncan, J. L. Shabel, B. S. Filho, J. G. SAE Paper 780391 1978
- Meuleman, D. J. Denner, S. G. Chung, F. L. “The Effect of Zinc Coatings on the Formability of Automotive Sheet Steels,” SAE Paper No. 840370 1984
- Ayres, R. A. Brazier, and W. A. Sajewski, V. F. “Evaluating the GMR Limiting Dome Height Test as a New Measure of Press Formability Near Plane Strain,” Journal of Applied Metalworking 1 No. 1 1979 41 49
- Meuleman, D. J. Siles, and J. L. Zoldak, J. J. “The Limiting Dome Height for Assessing the Formability of Sheet Steel,” SAE Paper No. 850005 1985
- Brazier W. G. Thompson, R. W. “The Effect of Die Materials and Lubrication on Punch Stretching and Drawing Forces of Cold-Rolled and Zinc-Coated Steels,” SAE Paper No. 850274 1985
- Brazier W. G. Thompson, R. W. “The Effect of Zinc Coatings, Die Materials, and Lubricants on Sheet Metal Formability,” SAE Paper No. 860434 1986
- Schey, J. A. Tribology in Metal working: Friction, Lubrication, and Wear , Dekker New York, NY 1978
- Nine, H. D. “Draw Bead Forces in Sheet Metal Forming,” Mechanics of Sheet Metal Forming - Material Behavior and Deformation Analysis , General Motors Research Symposium Koistinen Wang, Plenum Press New York, NY 1978 179 207
- Nine, H. D. “Testing Lubricants for Sheet Metal Forming,” Novel Techniques in Metal Deformation Testing Waggoner The Metallurgical Society of AIME Warrendale, PA 1983 31 46
- Nine, H. D. Paper to be Presented to Working Group III, IDDRG Toronto, Canada May 21 1988
- Dinda, S. James, K. F. Keeler, S. P. Stine, P. A. How To Use Circle Grid Analysis For Die Tryout American Society for Metals Metals Park, OH 1981
- Keeler and S. P. Dwyer, T. E. “Frictional Characteristics of Galvanized Steels Evaluated with a Draw Bead Simulator,” SAE Paper No. 860433 1986
- Keeler, S. P. “Evaluating the Lubricity of Press Shop Lubricants on Various Types of Galvanized Steels,” 28 th Mechanical Working and Steel Processing Conference Pittsburgh, PA October 26–28 1986 The Metallurgical Society of AIME Warrendale, PA 1986
- Siekirk, J. F. “A Systems Approach to Sheet Metal Forming Process,” Proceedings of the 15 th Biennial Congress of the IDDRG Dearborn, MI May 16–18 1988