This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Tribological Aspects of Cylinder Kit Systems in Adiabatic Engines
Annotation ability available
Sector:
Language:
English
Abstract
The successful operation of a piston-ring pack-liner-lubricant system in an adiabatic engine will not only require the development of ring face materials, liner surface materials and lubricants, but also the implementation of models which can define the environment in which the materials and lubricants are expected to operate. The purpose of this paper is to identify work which has been previously conducted in this area and to outline the elements of a new model which has been developed to integrate the effect of combustion pressure, ring movement and oil characteristics along with those variations in contact loading caused by cylinder liner and ring distortions due to mechanical and thermal loads. In addition, an advanced bench wear tester is described. This device was developed to permit the determination of wear characteristics of materials under actual operating conditions.
Topic
Citation
Brombolich, L. and McCormick, H., "Tribological Aspects of Cylinder Kit Systems in Adiabatic Engines," SAE Technical Paper 880018, 1988, https://doi.org/10.4271/880018.Also In
References
- Carr J. Jones J. “Post Densified Cr O coatings for Adiabatic Engine,” SAE Paper 840432 1984
- Das P. K. “Analysis of Piston Ring Lubrication,” SAE Paper 760008 1976
- Daskivich R. A. “Sensitivity of New - Engine oil Economy to cylinder Bore characteristics,” from ‘Surface Roughness Effects in Hydro-dynamic and Mixed Lubrication,’” Winter Annual Meeting of ASME Nov. 1980 1 17
- Dowson D. Economu P. N. Ruddy B. L. Strachen P. J. Baker A. J. S. “Piston Ring Lubrication-Part II, Theortical Analysis of a Single Ring and a Complete Ring Pack,” ‘Energy Conservation through Fluid Film Lubrication Technology: Frontiers in Research and Design,’ Winter Annual Meeting of ASME Dec. 1979 23 52
- Furuhama S. Hiruma M. “Axial Movement of the Piston Rings in the Groove,” ASLE Trans. 15 4 October 1972
- Furuhama S. Hiruma M. Tsuzita M. “Piston Ring Motion and Its Influence on Engine Tribology,” SAE Paper 790860 1979
- Furuhama S. Hiruma M. Yoshida H. “An Increase of Engine Oil Consumption at High Temperature of Piston and Cylinder,” SAE Paper 810976 1981
- Furuhama S. Suzuki H. “Temperature Distributions of Piston and Piston Rings in High Speed Diesel Engine,” Trans. Japan Soc. Mech. Eng. 45 392 April 1979 571
- Gunsel S. Klaus E. Duda J. L. “High Temperature Deposition Characteristics of Mineral Oil and Synthetic Lubricant Basestocks,” STLE Preprint No. 87-TC-3B-3 STLE/ASME Tribology Conference San Antonio, Texas October 5-8, 1987
- Li C. H. “Piston Thermal Deformation and Friction Considerations,” SAE Paper 820086 1982
- Maekawa K. Mitsurake S. Moronhoshi S “A Study on Engine Oil Consumption by Computer Simulation,” SAE Paper 860546 1986
- Mayer W. J. Moore C. P. Krause D. P. Lange W. H. Murphy C. B. “Rapid, Precise Measurement of Engine Oil Economy by a Radiometric Method,” SAE Paper 660058 1966
- Mierbach A. Duck G. E. Newman B. A. “Heat Flow Through Piston Rings and Its Influence on Shape,” SAE Paper 831283 1983
- Miyachika M. Hirota T. Kashiyama K. “A Consideration of Piston Second Land Pressure and Oil Consumption of Internal Combustion Engine,” SAE Paper 840099 1984
- Moore S. L. “Piston Ring Oil Film Thickness-The Effect of Viscosity,” SAE Paper 850439 1985
- Moore S. L. Hamilton G. M. “The Starved Lubrication of Piston Rings in a Diesel Engine,” Mech. Eng. Sci. 20 6 1978 345 352
- Namazian M. Heywood J. E. “Flow in the Piston-Cylinder-Ring Crevices of a Spark Ignition Engine,” SAE Paper 820088 1982
- Pachernegg S. J. “The Hydraulics of Oil Scraping,” SAE Paper 710816 1971
- Parker D. A. Stafford J. V. Kendrick M. Graham N. A. “Experimental Measurements of the Quantities Necessary to Predict Piston Ring-Cylinder Bore Oil Film Thickness and of the Oil Film Thickness in two Particular Engines” IMechE Conference on Piston Ring Scuffing London 1975 79 98
- Patterson D. Ku Y. “Piston and Ring Friction, Fixed Sleeve Method,” SAE Paper 880571 1988
- Radovanovic R. S. Kamo R. Dufrane K. F. “Tribological Investigations for an Insulated Diesel Engine,” SAE Paper 830319 1983
- Rhode S. M. “A Mixed Friction Model for Dynamically Loaded Contacts with Application to Piston Ring Lubrication,” Proceedings of the 7th Leeds-Lyon Symposium on Tribology 1980
- Ruddy B. L. Dowson D. Economu P. N. Baker A. J. S. “Piston Ring Lubrication - Part III, The Influence of Ring Dynamics and Ring Twist,” from ‘Energy Conservation Through Fluid Film Lubrication Technology: Frontiers in Research and Design,’” Winter Annual Meeting of ASME Dec. 1979 191 215
- Ruddy B. L. Dowson D. Economou P. N. “A Theoretical Analysis of the Twin-Land Type of Oil-Control Piston Ring,” Mech. Eng. Sci. 23 2 1981 51 62
- Ruddy B. L. Dowson D. Economou P. N. “The Prediction of Gas Pressures Within the Ring Packs of Large Bore Diesel Engines,” Mech. Eng. Sci. 23 6 1981 295 304
- Ruddy B- L. Parsons B. D. Economou P. N. “The Influence of Thermal Distortion and Wear in Piston Ring Grooves Upon the Lubrication of Piston Rings in Diesel Engines,” Proceedings of the 6th Leeds-Lyon Symposium on Tribology 1980
- Shimauchi T. Murakami T. Nakagaki T. Tsuya Y. Umeda K. “Tribology at High Temperature for Uncooled Heat Insulated Engine,” SAE Paper 840429 1984
- Ting L. L. Mayer J. E. “Piston Ring Lubrication and Cylinder Bore Wear Analysis, Part I-Theory,” Trans. ASME, Journal of Lubrication Technology July 1974 305 314
- Ting L. L. Mayer J. E. “Piston Ring Lubrication and Cylinder Bore Wear Analysis, Part II: Theory Verification,” Trans. ASME, Journal of Lubrication Technology April 1974 258 266
- Truscott R. Reid T. Ruddy B. L. “Ring Dynamics in a Diesel Engine and Its Effect on Oil Consumption and Blowby,” SAE Paper 831282 1983
- Warrick F. Dykehouse R. “An Advanced Radiotracer Technique for Assessing and Plotting Oil Consumption in Diesel and Gasoline Engines,” SAE Paper 700052 1970
- Willn J. E. Brett P. S. “An Investigation into Piston Ring Scuffing During Running In,” Piston Ring Scuffing Conference London May 13-14, 1975 Mechanical Engineering Publications Ltd. London
- Yamashita N. Mura T. Cheng H. “Effect of Stresses Induced by a Spherical Asperity on Surface Pitting in Elastohydrodynamic Contacts,” ASLE Preprint No. 83-LC-2C-1 ASLE/ASME Lubrication Conference Hartford, Conn. Oct. 18-20, 1983