This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Low-Heat Rejection Engines — A Concept Review
Annotation ability available
Sector:
Language:
English
Abstract
A comprehensive review of low-heat rejection engine concepts is presented. Areas examined include the materials being considered for these engines; fuels including coal; the effects of high temperature upon emissions; tribology with ceramics; exhaust heat utilization systems; and applications of these engines. Inconsistencies in the literature arc discussed.
Recommended Content
Authors
Citation
Churchill, R., Smith, J., Clark, N., and Turton, R., "Low-Heat Rejection Engines — A Concept Review," SAE Technical Paper 880014, 1988, https://doi.org/10.4271/880014.Also In
References
- Kamo R. Bryzik W. “Cummins/TACOM Advanced Adiabatic Engine” Society of Automotive Engineers (SAE) 840428
- Quackenbush, Carr Lane (Norton/TRW Ceramics) “Advanced Ceramics for Automobiles” Automotive Engineering May 1987 68 71
- Walzer Peter Heinrich Hartmut Langer Manfred “Ceramic Components in Passenger-Car Diesel Engine” SAE 850567
- Hoag Kevin L. “Measurement and Analysis of the Effect of Wall Temperature on Instantaneous Heat Flux” SAE 860312 , SP-650
- Morel Thomas Karibar Rifat Fort Edward F. Blumberg Paul N. “Methods for Heat Transfer and Temperature Field Analysis of the Insulated Diesel (Phase Il-Progress Report)” US Department of Energy contract number DOE/NASA/0342-2 September 1985
- Kamo R. Bryzik W. “Adiabatic Turbocompound Engine Performance Prediction” SAE 780068
- French C. C. J. “Ceramics in Reciprocating Internal Combustion Engines” SAE 841135
- Kamo R. Bryzik W. “Uncooled, Unlubricascd Diesel?” Automotive Engineering 87 6 June 1979 59 61
- Timoney S. Flynn G. “A Low Friction, Unlubricated SiC Diesel Engine” SAE 830313
- “Ceramic Composite” Automotive Engineering December 1986 22
- Bryzik Walter Kamo Roy. “TACOM/Cummins Adiabatic Engine Program” SAE 830314
- Marmach M. et al “Toughened PSZ Ceramic; - Their Role as Advanced Engine Components” SAE 830318
- Moorhouse Peter Johnson Michael P. “Development of Tribological Surfaces and Insulating Coalings for Diesel Engines” SAE 870161 , SP-700
- Larson D. C. Adams J.W. Johnson L.R. Teotia A.P.S. Hill L.G. Ceramic Materials For Advanced Heat Engines Noyes Publications New Jersey 1985
- Carr Jeffrey Jones Jack “Post Densified Cr 2 O 3 Coolings for Adiabatic Engines” SAE 840432 , SP-571
- Lumby R. J. Hodgson P. Cother N. E. Szweda A. “Syalon Ceramics for Advanced Engine Components” SAE 850521
- Hellander John C Consulting ceramic engineer for Ceramic-Refractory Corporation (Transfer, Pa.) SAE Piusburgl Section 2/17/87
- Ceramic-Refraclory Corporation information sheet Gatewa Equipment Company, Inc. Pittsburgh, Pa
- Sudhaker Van “Performance Analysis of Adiabatic Engine” SAE 840431
- Morel T. Keribar R. Blumberg P. “Cyclical Thermal Phenomena in Engine Combustion Chamber Surfaces” SAE 850360
- Kirloskar C. S. Chandorkar S. B. Rao Narayan “Investigation on the Differentially Cooled System” SAE 840427 , SP - 571
- Timoney S. G. “Engine Rig for Screening Ceramic Materials” SAE 840433 , SP-571
- Matsuoka H. Kawamura H. Toeda S. “Development of Ceramic Pre-combustion Chamber for the Automotive Diesel Engine” SAE 840426 , SP - 571
- Sutor Paul Bryzik Walter “Tribological Systems for High Temperature Diesel Engines” SAE 870157 , SP-700
- Shimauch Tomoki Murakami Taku Nakagaki Tsutomu Tsuya Yuko Umeda Kazunori “Tribology at High Temperature for Uncooled Heat Insulated Engine” SAE 840429 , SP-571
- Alkidas A. C. “The Influence of Partil Suppression of Heat Rejection on the Performance and Emissions of a Divided-Chamber Diesel Engine” SAE 860309 , SP-650
- Alkidas A. C. Cole R. M. “Gaseous and Particulate Emissions from a Single-Cylinder Divided-Chamber Diesel Engine” SAE Transactions 92 3.802 3.814 1983
- Plee S. L. MacDonald J. S. “Some Mechanisms Affecting the Mass of Diesel Exhaust Particulate Collected Following a Dilution Process” SAE Transactions 89 1057 1066 1980
- Greeves G. Wang C. H. T. “Origins of Diesel Particulate Mass Emission” SAE Transactions 90 1161 1172 1981
- Cole R. M. Alkidas A. C. “Evaluation of an Air-Gap-Insulated Piston in a Divided-Chamber Diesel Engine” SAE 850359 , SP-610
- Lilly L. R. C. Diesel Engine Reference Book Butterworths and Co. (Publishers) Ltd. London, U.K. 1984
- Carpenter Larry K. Crouse Floyd W. Jr. “Coal-Fueled Diesels: Progresses and Challenges” 1985-86
- Robben F. “Coal-Fueled Diesel Engines” SAE 831747
- Kamo Roy “Combustion Characteristics of Coal Fuels in Adiabatic Diesel Engines” Contract with DOE number DE-AC-21-84MC21099. METC Project Manager Larry Carpenter
- Ryan Thomas W. III “Combustion Characteristics of Coal Fuels in Adiabatic Diesel Engines” Contract with DOE number DE-AC-2I-84MC21384. METC Project Manager Larry Carpenter
- Woschni Gerhard Spindler Walter Kolesa Konrad “Heat Insulation of Combustion Chamber Walls - A Measure to Decrease the Fuel Consumption of I. C. Engines?” SAE 870339
- Bailey M. “Comparative Evaluation of Three Alternative Power Cycles for Waste Heat Recovery From the Exhaust of Adiabatic Diesel Engines” NASA Tech Memo 86953 July 1985
- Watson N. Kyrtatos N. P. Holmes K. “The Performance Potential of Limited Cooled Diesel Engines” Proceedings Inst. Mech. Engr. Part A 197 July 1983 197 207
- Wurm Jaroslav Kinast John A. Bulicz Tytus “Assessment of Positive Displacement Supercharging and Compounding of Adiabatic Diesels” SAE 840430 . SP-571
- Watson N. “Performance Potential of Limited Cooled Diest Engines'” Proceedings Inst. Mech. Engr. Part A 198 1984 97 105
- Automotive News May 11 1987 “Are ceramics worth thet mettle?”
- Tovell J.F. “The Reduction of Heat Losses To The Diesel Engine Cooling System” SAE 830316
- Dobbs H. H. Glance P. C. “Advanced Integrated Propulsion Systems (AIPS) for Future Main Battle Tank (MBT)” SAE 830504
- Wilsted H. D. “Preliminar Survey of Possible Use of the Compound Adiabatic Diesel Engine for Helicopters” SAE 820432
- Kamo Roy Kakwani R. Hady W. “Adiabatic Wankel Type Rotary Engine” SAE 860616 , SP-650
- Hope Jack I. “The Giesel: A New Concept for Reduced Fuel Consumption in Internal Combustion Engines” Haeco, Inc. Cinncinnati, Ohio
- Kirk J. David. “Design of a Two-Stroke Cycle Spark Ignition Engine Employing a Scotch-Yoke Crankshaf Mechanism” SAE 851518
- Smith James E. “The Dynamic Analysis of an Elliptical Trammel Mechanism for Possible Application to an Internal Combustion Engine With a Floating Crank” Ph. D. Dissertation West Virginia University, Dept. of Mechanical and Aerospace Engineering 1984
- Stelzer Motor Company Brochure Stelzcr Motor GmbH & Co. KG AUF DEM Schafberg 4-6. D-6230 Frankfurt
- Mozurkewich Michael Berry R. Stephen “Optimal Paths for Thermodynamic Systems: The Ideal Otto Cycle” Journal of Applied Physics January 1982 34 42
- Dugan R. W. Perry J. E. “Diesel Engines - Designing For The Future” SAE 820621