Vortex Simulation of the Induction and Compression Processes in an Engine Model

Authors

• Luis-Filipe Martins - Massachusetts Institute of Technology, Cambridge, MA
• Ahmed F. Ghoniem - Massachusetts Institute of Technology, Cambridge, MA

Topic

• Combustion and combustion processes
• Engine cylinders
• Pistons
• Simulation and modeling
• Valves

Citation

Also In

References

1. Reynolds, W.C. “Modeling of fluid motion in engines - An introductory overview,” Combustion Modeling in Reciprocating engines Mattavi J. M. Amann C.A. Plenum Press 1980 69 124
2. Arcoumanis, C. Whitelaw, J. H. “Fluid mechanics of internal combustion engines: a review,” Inter. Symp. on Flows in Internal Combustion Engines-III ,” Nov 17-22 1985 Uzkan it al. ASME Pub. New York 1 17
3. Gosman, A.D. “Flow processes in cylinders,” Thermodynamics and Gas Dymanics of Internal Combustion Engines II Horlock J. Winterborne D. Clarendon Press Oxford 1096 616 772
4. Heywood, J.B. “Fluid motion within the cylinder of internal combustion engines,” ASME Journal of Fluid Engineering 1987
5. Gosman, A.D. Melling, A. Whitelaw, J.H. Watkins, A.P. “Axisymmetric flow in a motored reciprocating engine,” Proc. Instn.. Mech. Engrs. 192 1978 213
6. Morse, A.P. Whitelaw, J.H. Yianneskis, M. “The flow characteristics in a piston-cylinder assembly with an off-center, open port,” Proc. Instn. Mech. Engrs. 194 1980 291
7. Arcoumanis, C Bicen, A.F. Vlachos, N.S. Whitelaw, J.H. “Effect of flow and geometry boundary conditions on fluid motion in a motored IC engine,” Proc. Instn. Mech. Engrs. 196 1982 1 10
8. Ramos, J.I. Gany, A. Sirignano, W. “Study of turbulence in motored four-stroke internal combustion engine,” AIAA Journal 19 1981 595
9. El-Tahry, S.H. “A comparison of three turbulence models in engine-like geometries,” Inter. Symp. Diagnostics and Modeling of Combustion in Reciprocating Engines JSME Tokyo, Japan 1985 203 213
10. Ashurst, W.T. “Numerical simulation of turbulent mixing layers via vortex dynamics,” Proceedings of the 1st Symposium on Turbulent Shear flow 1979 Springer-Verlag 402
11. Ashurst, W.T. “Vortex Simulation of a Model Turbulent Combustor” Dynamics of Reactive Systems Ray J. et al. Prog. Astro, and Aero. 1981 259 273
12. Ghoniem, A.F. Chen, D.Y. Oppenheim, A.K. “Formation and inflammation of a turbulent jet,” AIAA Journal 24 1986 224 229
13. Ghoniem A.F. Ng, K.K. “Numerical study of the dynamics of a forced shear Phys. Fluids 30 1987 706 721
14. Ghoniem, A.F. Gagnon, Y. “Vortex simulation of laminar recirculating flow,” J.Comput. Phys. 68 1987 346 377
15. Ghoniem, A.F. Sethian, J.A. “Effect of Reynolds number on the structure of recirculating flow” AIAA J. 25 1987 168 171
16. Leonard, A. “Computing three dimensional incompressible flows with vortex elements” Ann. Rev. Fluid Mech. 17 1985 525 559
17. Ghoniem, A.F. Knio, O.M. Aly, H.F. “Three dimensional vortex simulation with application to axisymmetric shear layer,” AIAA Paper No. 87-0379, the 25th AIAA Aerospace Sciences Meeting Reno, Nevada January 1987
18. Chorin, A.J. “Vortex sheet approximation of boundary layers,” J. Comput. Phys. 27 1987 423 442
19. Ashurst, W. “Vortex dynamic calculation of fluid motion in a four stroke piston “cylinder”-planar and axisymmetric geometry,” Sandia Laboratory Report SAND78-8229
20. Sod, G.A. “A Hybrid random choice method with application to internal combustion engines,” Proceedings of the 6th International Conference on Numerical Methods in Fluid Dynamics , 1987 Sringer-Verlag SAE Paper No. 790242
21. Keck, J.C. Heywood, J.B. Noske, G. “Early flame development and burning rates in spark ignition engines” SAE Paper No. 870164 SAE International Congress and Exposition February 23-27 Detroit, MI 1987
22. Sivashinsky, G.I. “Hydrodynamic theory of flame propagation in an enclosed volume,” Acta Astornautica 6 1979 631 645
23. Majda, A. Sethian, J. “The derivation and numerical solution of zero-Mach number combustion,” Comb.' Sci. and Tech. 42 1985 185
24. Ghoniem, A.F. “Computational Methods in Combustion,” Reacting Flows: Combustion and Chemical Reactors 24 AMS 1985 199
25. Chorin, A.J. “Vortex models and boundary layer instability,” SIAM J. Sci. Stat. Comput. 1 1980 1 21
26. Najm, H. Ghoniem, A.F. “Numerical simulation of the convective instability in a dump,” AIAA Paper No. 87-1874 AIAA/SAE/ASME/ASSE 23rd Joint Propulsion Conference June 29 July 1 1987 La Jolla, CA
27. Ghoniem, A.F. Sherman, F.S. 1985 “Grid-free simulation of diffusion using random walk methods,” J. Comput. Phys. 61 1985 1 37
28. Gatowski, J.A. Heywood, J.B. “Effect of value shrouding and squish on combustion in a spark ignition engine,” SAE Paper No. 85209 International Fuels and Lubricants Meeting and Exposition Tulsa, Oklahoma Oct. 21-24 1985
29. Oppenheim, A.K. Ghoniem, A.F. “Aerodynamic features of turbulent flames,” AIAA 21st Aerospace Sciences Meeting Jan. 1983
30. Gosman, A.D. Jahanbakhsh, A. Watkins, A.P. “Evaluation of multidimensional flow in piston-bowl configurations,” Int. Sump, on Flows in Internal Combustion Engines-III Nov 17-22 1985 Uzkan et al. ASME Pub. New York 115 0124
31. Batchelor, G.K. An Introduction to Fluid Dynamics Cambridge University Press 1967 xviii 615
32. Ekchian, A. Hoult, D.P. “Flow Visualization study of the intake process of an internal combustion engine,” SAE Paper No. 970095 SAE Congress and Exposition Detroit, Michigan 1979 Trans. SAE 1981 1196 1216

Cited By