This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Autoignition of Isobutane in a Knocking Spark Ignition Engine
Annotation ability available
Sector:
Language:
English
Abstract
The chemical aspects of the autoignition of isobutane are studied experimentally in a spark ignition engine and theoretically using computer simulations with a detailed chemical kinetic mechanism. The results of these studies show that even with the relatively knock-resistant fuel, isobutane, there is still a significant amount of fuel breakdown in the end gas with a resulting heat release and temperature increase. The ability of the detailed kinetic model to predict this low temperature chemical activity is assessed and the model is modified to simulate more closely the experimental observations. We address the basic question of whether this first stage of combustion accounts for a chemical preconditioning of the end gas that leads to the autoignition; or whether it merely provides sufficient heat release in the end gas that high temperature autoignition is initiated.
Recommended Content
Technical Paper | The Prediction of Auto Ignition in a Spark-Ignited Engine |
Technical Paper | Calculating the Properties of User-Defined Working Fluids for Real Working-Process Simulations |
Authors
Topic
Citation
Green, R., Parker, C., Pitz, W., and Westbrook, C., "The Autoignition of Isobutane in a Knocking Spark Ignition Engine," SAE Technical Paper 870169, 1987, https://doi.org/10.4271/870169.Also In
SAE 1987 Transactions: Reciprocating Engines--Spark Ignition and Diesel
Number: V96-4; Published: 1988-09-01
Number: V96-4; Published: 1988-09-01
References
- Dale J.D. Oppenheim A.K. “A Rationale for Advances in the Technology of I. C. Engines,” SAE Paper No. 820047 SAE International Congress and Exposition Detroit. MI 1982
- Egerton A. Smith F.LI. Ubbelohde A.R. “Estimation of the Combustion Products from the Cylinder of the Petrol Engine and its Relation to ‘Knock’,” Phil. Trans. of the Royal Society of London A 744 234 433 1935
- Downs D. Walsh A.D. Wheeler R.W. “A Study of the Reactions that Lead to ‘Knock’ in the Spark Ignition Engine.” Phil. Trans. of the Royal Society of London A 243 462 1951
- Downs D. Griffiths S.T. Wheeler R.W. “Pre-Flame Reactions in the Spark Ignition Engine: The Influence of Tetraethyl Lead and Other Antiknocks,” Jour of the Inst, of Petrol. 49 469 8 1963
- Pahnke A.J. Cohen P.M. Sturges B.M. “Pre-flame Oxidation of Hydrocarbons in a Motored Engine,” Ind. and Engin. Chem. 46 5 1024 1954
- Walcutt C. Mason J.M. Rifkin E.B. “Effect of Preflame Oxidation Reactions on Engine Knock.” Ind. and Engin. Chem. 46 5 1029 1954
- Sturgis B.M. “Some Concepts of Knock and Antiknock Action.” SAE Transactions 63 253 1955
- Gluckstein M.E. Walcutt C. “End-Gas Temperature-Pressure Histories and Their Relation to Knock.” SAE Transactions 69 529 1961
- Johnson J.H. Myers P.S. Uyehara O.A. “End-Gas Temperatures. Pressures. Reaction Rates, and Knock.” SAE Transactions 74 748 1965
- Smith J.R. Green R.M. Westbrook C.K. Pitz W.J. “An Experimental and Modeling Study of Engine Knock,” Twentieth Symposium (International) on Combustion, The Combustion Institute 91 1984
- Green P.M. Lucht R.P. “An Application of Laser Diagnostics to the Study of End-Gas Autoignition and Engine Knock.” Trans. of COMMODIA - International Symposium on Diagnostics and Modeling of Combustion in Reciprocating Engines Tokyo, Japan 259 1985
- Lucht R.P. Green R.M. Palmer R.E. Teets R.E. Ferguson C.R. “Unburned Gas Temperatures in an Internal Combustion Engine: 1. CARS Temperature Measurements,” Comb. Sci. and Tech. 1986
- Ferguson C.R. Green R.M. Lucht R.P. “Unburned Gas Temperatures in an Internal Combustion Engine: II. Heat Release Computations.” Comb. Sci. and Tech. 1986
- Cernansky N.P. Green R.M. Pitz W.J. Westbrook C.K. “Chemistry of Fuel Oxidation Preceeding Autoignition.” Comb. Sci. and Tech. 1986
- Johnston S.C. Robinson C.W. Rorke W.S. Smith J.R. Witze P.O. “Application of Laser Diagnostics to an Engine,” SAE Transactions 88 353 1979
- Lund C.M. “HCT—A General Computer Program for Calculating Time-dependent Phenomena Involving One Dimensional Hydrodynamics, Transport, and Detailed Chemical Kinetics” Lawrence Livermore National Laboratory Livermore, CA report UCRL-52504 1978
- Pitz W.J. Westbrook C.K. “Chemical Kinetics of the High Pressure Oxidation of n-Butane and Its Relation to Engine Knock” Combustion and Flame 63 113 1986
- Westbrook C.K. Pitz W.J. “Chemical Kinetics Modeling of the Influence of Molecular Structure on Shock Tube Ignition Delay” Bershader D. Hanson R. Shock Waves and Shock Tubes Stanford University Press Stanford, CA 1986
- Pitz W.J. Westbrook C.K. Proscia W.M. Dryer F.L. “A Comprehensive Chemical Kinetic Reaction Mechanism for the Oxidation of n-Butane.” Twentieth Symposium (International) on Combustion/The Combustion Institute 831 1984
- JANAF Thermochemical Tables U.S. Government Printing Office Washington, D.C. 1971
- Benson S.W. Thermochemical Kinetics Wiley New-York 1976
- Baker R.R. Baldwin R.R. Walker R.W. “Addition of i-Butane to Slowly Reacting Mixtures of Hydrogen and Oxygen at 480 C” Jour. Chem. Soc., Faraday Trans. I 74 2229 1978
- Kaiser E.W. Westbrook C.K. Pitz W.J. “Acetaidchyde Oxidation in the Negative Temperature Coefficient Regime: Experimental and Modeling Results.” Int. Jour. Chem. Kinetics 18 655 1986
- Halstead M.P. Kirsh L.J. Quinn C.P. “The Autoignition of Hydrocarbon Fuels at High Temperatures and Pressures - Fitting of a Mathematical Model.” Combustion and Flame 30 45 1977
- Morgan C.A. Pilling M.J. Tulloch J.M. Ruiz R.P. Bayes K. “Direct Determination of the Equilibrium Constant and Thermodynamic Parameters for the Reaction C 3 H 5 + O 2 ⇌ C 3 H 5 O 2 ,” Jour. Chem. Soc. Faraday Trans. 2 78 1323 1982
- Proscia W.M. “High Temperature Flow Experiments and Multiple-Step Overall Kinetic Mechanisms for the Oxidation of High Carbon Number Paraffin Hydrocarbons.” MSE Thesis 1625-T Dept. of Mechanical and Aerospace Engineering, Princeton University 1983
- Wilk R.D. Miller D.L. Cernansky N.P. “An Experimental Study of Isobutane Oxidation at Transition Temperatures,” meeting of the Western States Section of the Combustion Institute Tucson, AZ Oct. 27-28 1986
- Glarborg P. Miller J.A. Kee R.J. “Kinetic Modeling and Sensitivity Analysis of Nitrogen Oxide Formation in Well-Stirred Reactors.” Combustion and Flame 65 177 1986
- Benson S.W. “Combustion. A Chemical and Kinetic View,” 21st Symposium (International) on Combustion 1986