This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Truck Control Problems Posed by the Design of Highway Ramps
Annotation ability available
Sector:
Language:
English
Abstract
A research study is described in which accidents experienced by tractor-semitrailers on expressway ramps were seen to depend largely upon the interaction between highway geometrics and vehicle dynamic behavior. The accident rates of tractor-semitrailers on expressway ramps in five states were scanned to select fourteen individual ramps which indicated an unusual incidence of serious accidents involving these vehicles. The geometrics of each ramp were fully defined in a computer simulation such that the dynamic behavior of example tractor-semitrailers could be examined. The paper presents the results of the combined study of accident data, simulated vehicle response, and the geometric details of ramp design. The findings of the study indicate that the maneuvering limits of certain trucks are very low, relative to those of passenger cars, such that current practice in ramp design leaves a very small margin for control of the heavy vehicles.
Authors
Citation
Ervin, R., MacAdam, C., and Barnes, M., "Truck Control Problems Posed by the Design of Highway Ramps," SAE Technical Paper 870071, 1987, https://doi.org/10.4271/870071.Also In
References
- American Association of State Highway and Transportation Officials “A Policy on Geometric Design of Highways and Streets.” 1984
- Cirillo, J. Dietz, S. Beatty, R. “Analysis and Modeling of Relationships between Accidents and the Geometric and Traffic Characteristics of the Interstate System.” BPR Research and Development Report U.S. Dept. of Transportation August 1969
- Browner, H. “Analysis of Relationships between Accidents and Geometrics and Traffic Characteristics on the Interstate System.” Paper presented at ITE Meeting Montreal, Canada 1971
- Fisher, R. “Accident and Operating Experience at Interchanges.” Highway Research Board Bulletin 291 1961 124 138
- Yates, J. “Relationship between Curvature and Accident Experience on Loop and Outer Connection Ramps.” Highway Research Record 312 1970 64 75
- Lundy, R. “The Effect of Ramp Type and Geometry on Accidents.” Highway Research Record 163 1967 80 119
- Pinnell, C. Buhr, J. “Urban Interchange Design as Related to Traffic Operation-Part I-Diamond Interchanges.” Traffic Engineering 36 7 March 1966 20 50
- Pinnell, C. Buhr, J. “Urban Interchange Design as Related to Traffic Operation-Part II-Cloverleaf and Directional Interchanges.” Traffic Engineering 36 7 April 1966 51 56
- Gray, P. Kauk, W. “Circular and Elongated Freeway Exit Loop Ramps.” 38 7 April 1968 16 19
- Langsher, G. “Accident Experience at Ramps-Exits and Entrance-Preceding and Beyond Interchange Structures.” Paper Presented at the Regional Meeting AASHO Committee on Design Denver September 1959
- Mullins, B. Keese, C “Freeway Traffic Accident Analysis and Safety Study.” Paper presented at the HRB 40th Annual Meeting 1961
- Hill, G “Designing Better Freeways.” Traffic Engineering 31 1 October 1960 11 18
- Wattleworth, J. et al. “Operational Effects of Some Entrance Ramp Geometrics on Freeway Merging.” Highway Research Record 208 1967 79 114
- Drew, D. et al. “Gap Acceptance in the Freeway Merging Process.” Highway Research Record 208 1967 1 36
- Buhr, J. et al. “A Nationwide Study of Freeway Merging Operations.” Highway Research Record 202 1967 776 122
- MacAdam, C.C. et al. “A Computerized Model for Simulating the Braking and Steering Dynamics of Trucks, Tractor-Semitrailers, Doubles, and Triples Combinations - Users' Manual, Phase 4.” Final Rept., Transp. Res. Inst. Univ. of Mich. September 1 1980
- MacAdam, C.C. “Application of an Optimal Preview Control for Simulation of Closed-Loop Automobile Driving.” IEE Transactions on Systems, Man, and Cybernetics SMC-11 6 June 1981 393 399
- Bernard, J.E Winkler, C.B. Fancher, P.S. “A Computer-Based Mathematical Method for Predicting the Directional Response of Trucks and Tractor-Trailers. Phase II Technical Report.” Highway Safety Res. Inst., Univ. of Mich. Rept. No. UM-HSRI-PF-73-1 June 1 1973
- Gillespie, T.D. “Validation of the MVMA/HSRI Phase II Straight Truck Directional Response Simulation.” Final Report to MVMA. Highway Safety Res. Inst. Univ. of Mich. October 1978
- Ervin, R.D. et al “Influence of Size and Weight Variables on the Stability and Control Properties of Heavy Trucks.” II Final Rept., Contract No. FH-11-83-10 Transp. Res. Inst., Univ. of Mich. May 1983
- MacAdam, C.C. Fancher, P.S. Segel, L. “Side Friction for Superelevation on Horizontal Curves.” Final Rept., Contract No. DTFH61-82-C-00019 Transp. Res. Inst., Univ. of Mich. June 1985
- Ervin, R.D. “The Influence of Size and Weight Variables on the Roll Stability of Heavy-Duty Trucks.” SAE Paper No. 831163 1983
- Winkler, C.B. Fancher, P.S. MacAdam, C.C. “Parametric Analysis of Heavy-Duty Truck Dynamic Stability.” Final Rept., Contract DTNH22-80-C-07344 Transp. Res. Inst., Univ. of Mich. March 1983
- Ervin, R.D. Fancher, P.S. Gillespie, T.D. “An Overview of the Dynamic Performance Properties of Long Truck Combinations.” Transp. Res. Inst., Univ. of Mich. Rept. No. UMTRI-84-26 July 1984
- American Association of State Highway Officials “A Policy on Geometric Design of Rural Highways.” 1965
- Radlinski, R.W. Williams, S.F. “NHTSA Heavy-Duty Vehicle Brake Research Program Report No, 1 - Stopping Capability of Air Braked Vehicles.” 1 Tech. Rept., Interim Rept. NRD-22 September 1984
- Radlinski, R. Machey, J. Williams, S. “The Importance of Maintaining Air Brake Adjustment.” SAE Paper No. 821263 November 1982
- Home, W.B. “Predicting the Minimum Dynamic Hydroplaning Speed for Aircraft, Bus, Truck, and Automobile Tires Rolling on Flooded pavements.” Presentation to ASTM Committee E-17 College Station, Texas June 5 1984
- Ivey, D.L. et al. “Tractor-Semitrailer Accidents in Wet Weather.” The Texas Transp. Inst., Texas A&M Univ. May 1985
- Bernard, J.E. Vanderploeg, M. “Static and Dynamic Offtracking of Articulated Vehicles.” SAE Paper No. 800151 February 1980
- Ervin, R.D. et al. “Influence of Size and Weight Variables on the Stability and Control Properties of Heavy Trucks.” I Transp. Res. Inst, Univ. of Mich. Rept. No. UMTRI-83-10 May 1983