This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Thermodynamic Simulation Model for a Dual Fuel Open Combustion Chamber Compression Ignition Engine
Annotation ability available
Sector:
Language:
English
Abstract
A thermodynamic cycle simulation model is described for a dual fuel open combustion chamber compression ignition engine. The model has been formulated for the compression, combustion, expansion, exhaust and intake processes. The combustion model is simulated by estimating the heat release rates due to the injected dissel fuel and the secondary fuel (biogas) supplied through the intake manifold. The injected fuel's heat release rate is computed from the preparation and burning rates, uhile that of the biogas is determined from the entrainmBnt of air and biogas mixture into the fuel spray. A finite difference scheme is employed to solve the gas exchange process for both the exhaust and intake systems. The overall comparison shous that the model satisfactorily predicted the experimental data.
Recommended Content
Authors
Topic
Citation
Mathur, H., Babu, M., and Prasad, Y., "A Thermodynamic Simulation Model for a Dual Fuel Open Combustion Chamber Compression Ignition Engine," SAE Technical Paper 861275, 1986, https://doi.org/10.4271/861275.Also In
References
- Mathur, H.B. Gajendra Babu, M.K. Prasad, Y.N. Singh, V. “Performance and emission characteristics of a biogas operated compression ignition engine” Prof. National Conference on Fuels from crops Melbourne, Australia Sept. 1981
- Mathur, H.B. Gajendra Babu, M.K. Prasad, Y.N. Singh, V. “Evaluation of the performance and emission characteristics of a biogas operated diesel engine” Proc. Seventh National Conference on I.C. Engines and Combustion Surathkal, Karnataka, India Jan. 1982
- Gajendra Babu, M.K. “Computer modeling of internal combustion engines (A review paper)” Proc. Ninth National Systems Conference Allahabad, India Dec. 1985
- Lyn, W.T. “Calculations of the effect of rate of heat release on the shape of cylinder pressure diagrams and cycle efficiency” Proc. Auto Division, I.Mech.E. 1 1960-61
- Wiebe, I. “Halbempirische Formal fur die Verbrennungeschwindigkeit” Verlag der Akademic der Wissenchaften der Voser Moscow 1956
- Krieger, R.B. Borman, G.L. “The computation of apparent heat release for intenral combustion engine” 1966
- McAulay, K.J. Wu, T. Chen, S.K. Borman, G.L. Myers, P.S. Uyehara, O.A. “Development and evaluation of the simulation of compression ignition engine” SAE paper 650 451
- Srinivasa Rao, P. Gajendra Babu, M.K. Murthy, B.S. “Estimation of Nitric oxide in a diesel engine” Indian Journal of Technology Sept. 1978
- Whitehouse, N.D. Way, R. “Rate of heat release in Diesel engines and its correlation with fuel injection data” Proc. I.Mech.E. 184 1969-70
- Whitehouse, N.D. Sarin, B.K. “Prediction of heat release in a quiescent chamber diesel engine allowing for fuel/air mixing SAE paper 740 054 1974
- Hiroyasu, H. Kadota, T. “Models for combustion and formation of Nitric oxide and soot in direct injection Diesel engines” SAE paper 760 129 1976
- Shahed, S.H. Flynn, P.F. Lyn, W.T. “A model for the formation of emissions in a direct injection Diesel engine” 345 368 Combustion modeling in reciprocating engines Plenum Press New York 1980
- Watson, N. Meguerdichian, M. “Prediction of mixture formation and heat release in Diesel engines” SAE paper 780 225 1978
- Williams, T.J, Whitehouse, N.D. “Investigations into some aspects of the computation of Diesel engine combustion” Proc.I.Mech.E. 190 42 76
- Hodgetts, D. Shroff, H.D. “More on the formation of Nitric oxide in a Diesel engine” Conference on Combustion in Engines, I.Mech.E. Crankfield, U.K. 1975
- Rife, J. Heywood, J.B. “Photographic and performance studies of diesel combustion with rapid compression machine” SAE paper 740 948 1974
- Whitehouse, N.D. Abughres, S.M. “Calculations of fuel-air mixing in a Diesel engine with swirl for the purpose of heat release prediction” Conference on Combustion in Engines, I.Mech.E. Crankfield, U.K. 1975
- Dent, J.C. Mehta, P.S. “Phenomenological combustion models for a quiescent chamber diesel engine” SAE paper 811 235 1981
- Kumar, K. Gaur, R.R. Garg, R.D. Gajendra Babu, M.K. “A thermodynamic simulation model for a four stroke medium speed diesel engine” SAE paper 840 516 1984
- Kono, S. Nagao, A. “Prediction of the combustion characteristics by spray and combustion modal for direct injection Diesel engine” JSAE Review Nov. 1984
- Miyamoto, N. Chikahiaha, T. Murayama, T. Sawyer, R. “Description and analysis of Diesel engine rate of combustion and performance using Wiebe's functions” SAE paper 850 107 1985
- Hiroyasu, H. “Diesel engine combustion and its modeling” Proc. COMODIA-1985 Tokyo, Japan 53 75
- Tanabe, H. Sugihara, H. Kawakami, Fujimoto, H. Sato, G.T. “Heat release model based on combustion phenomena” Proc. COMODIA-1985 Tokyo, Japan 383 392
- Ahmad, T. Alkidas, A.C. “A simple correlation for mixing and combustion rates in Diesel engines” Proc. COMODIA-1985 Tokyo, Japan 393 403
- Bio Xia Cheng-Jiao Tong Bo-Zhowng Li “Combustion modeling and performance prediction of medium speed diesel engine” Proc. COMODIA-1985 Tokyo, Japan 405 412
- Cosman, A.D. Johns, R.J. “Computer analysis of fuel air mixing in direct injection diesel engine” SAE paper 800 091 1980
- Diwakar, R. “Multidimensional modeling applied to direct injection stratified charge engine-calculations vs. experiments” SAE paper 810 225 1981
- Duggal, V.K. Kuo, T.W. Mukerjee, T. Przekwas, A.J. Singhal, A.K. “Three dimensional modeling of In-cylinder processes in D.I. Diesel entines” SAE paper 840 227 1984
- Foster, D.E. Majit, P.M. “Compression ignited homogeneous charge combustion” SAE paper 830 264 1983
- Muthu, S. Jagadeesan, T.R. “Analytical and experimental investigation of Ethanol-Diesel fuel combustion system” VI International symposium on Alcohol fuels Technology Ottawa, Canada May 21-25 1984
- Sumbally, R. Subramanyan, J.P. Gajendra Babu, M.K. “A combustion model for a dual fuel direct injection compression ignition engines” IX National Conference on I.C engines and combustion Dehra Dun, India Nov. 19-22 1985
- Gajendra Babu, M.K. Murthy, B.S. “Simulation and evaluation of a four-stroke spark ignition engine” SAE paper 750 687 1975
- Hohenberg, G.F. “Advanced approaches for heat transfer calculations” SAE paper 790 825 1979
- Mathur, H.B. Gajendra Babu, M.K. Reddi, K.S. “A thermodynamic simulation model for a methanol fueled spark ignition engine” SAE paper 830 333 1983
- Olikara, C. Borman, G.L. “A computer program for calculating properties of equilibrium combustion products with some applications to IC Engines” SAE paper 750 468 1975
- Bracco, F.V. “Modeling of engine sprays” SAE paper 850 394 1985
- Hiroyasu, H. Kadota, T. Arai, M. “Supplementary comments: fuel spray characterisation in Diesel engines” Combustion modeling in reciprocating engines 369 408 Plenum Press New York 1980
- Arai, M. Jabata, H. Hiroyasu, H Shimizu, M. “Disintegrating process and spray characterization of fuel injected by a Diesel Nozzle” SAE paper 840275 1984
- Shapiro, A.H. “The dynamics and thermodynamics of compressible fluid flow” Ronald Press Co. 1953
- Benson, R.S. Garg, R.D. Woollatt, D. “A numerical solution of unsteady flow problems” International Journal of Mechanical Sciences 6 1964
- Gajendra Bebu, M.K. Murthy, B.S. “Simulation and evaluation of the intake and exhaust systems” SAE paper 760 763 1976
- Lakshminarayanan, P.A. Janakiraman, P.A. Gajendra Babu, M.K. Murthy, B.S. “A finite difference scheme for unsteady flows” International Journal of Mechanical Sciences 21 1979
- Lakshminarayanan, P.A. Janakiraman, P.A. Gajendra Babu, M.K. Murthy, B.S. “Prediction of gas exchange process in a single cylinder internal combustion engine” SAE paper 790 359 1979