This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Heat Radiation in D.I. Diesel Engines
Annotation ability available
Sector:
Language:
English
Abstract
A new model for radiation heat transfer in DI diesel engines has been developed. The model calculates the heat transfer rates as a function of the instantaneous values of the radiation zone size, radiation temperature, and of the absorption coefficient of the soot-laden gas. The soot concentration levels are calculated from kinetic expressions for soot formation and burnup. The spatial distribution of the radiant heat flux along the combustion chamber walls is calculated by a zonal model. The model has been applied to a conventional heavy duty highway DI diesel engine to generate predictions over a range of engine speeds and loads. These predictions indicated a wide variation in the ratio of radiation to the total heat transfer, ranging from less than ten percent to more than thirty percent, depending on the speed and load. Simulations were also made of the same engine lined with ceramic materials, for which the predicted ratio of radiation to the total heat transfer was found to be substantially increased.
Recommended Content
Authors
Topic
Citation
Morel, T. and Keribar, R., "Heat Radiation in D.I. Diesel Engines," SAE Technical Paper 860445, 1986, https://doi.org/10.4271/860445.Also In
References
- Annand, W.J.D. 1963 “Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines” Proc. IMech E 1963 177 973
- Bryzik, W. Smith, C. O. 1977 “Relationships Between Exhaust Smoke Emissions and Operating Variables in Diesel Engines” SAE Pages 770718
- Chang, S.L. Rhee, K.T. 1983 “Computation of Radiation Heat Transfer in Diesel Combustion,” SAE Paper 831332
- Chapman, M. Friedman, M.C. Aghan A. 1983 “A Time-Dependent Spatial Model for Radiant Heat Transfer in Diesel Engines,” SAE Paper 831725
- Dent, J.C. Suliaman, S.J. 1977 “Convective and Radiation Heat Transfer in a High Swirl DI Diesel Engine” SAE Paper 770407
- Ebersole, G.D. Myers, P.S. Uyehara, O.A. 1963 “The Radiant and Convective Components of Diesel Engine Heat Transfer” SAE Paper 701 C 1963
- Flynn, P. Mizukawa, M. Uyehara, O.A. Myers, P.S 1972 “An Experimental Determination of the Instantaneous Potential Radiant Heat Transfer Within an Operating Diesel Engine” SAE Paper 720022
- Gray, W. A. Mueller, R. 1974 Engineering Calculations in Heat Transfer Pergamon Press
- Hiroyasu, H. Kadota, T. 1976 “Models for Combustion and Formation of Nitric Oxide and Soot in DI Diesel Engines” SAE Paper 760129
- Hottel, H. C. 1954 “Radiant-Heat Transmission,” Heat Transmission McAdams W.M. McGraw-Hill 1954
- Kadota T. Henein, N.A. 1981 “Time Resolved Soot Particulates In Diesel Spray Combustion” Particulate Carbon - Formation During Combustion Plenum Press 1981 391 422
- Kamimoto, T. Matsuoka. S. Matsui, T. Aoyagi, T. 1975 “The Measurement of Flame Temperature and the Thermodynamic Analysis of Combustion Processes in a Direct Injection Diesel Engine” IMechE
- Khan, I.M. Greeves, G. Wang, C.H.T. 1973 “Factors Affecting Smoke and Gaseous Emissions From Direct Injection Engines and a Method of Calculation” SAE Paper 730169
- Kunitomo, T. Matsuoka, K. Oguri, T. 1975 “Prediction of Radiative Heat Flux in a Diesel Engine” SAE Paper 750786
- Lee, K.B. Thring, M.W. Beer, J.M. 1962 “On the Rate of Combustion of Soot in a Laminar Flame” Combustion and Flame 6 137
- Matsuoka, S. 1981 Discussion presented at a Symposium on Particulate Carbon - Formation During Combustion Plenum Press 1981 418 421
- Menguc, M.P. Viskanta, R. 1984 “Radiative Transfer in Axisymmetric, Finite Cylindrical Enclosures,” ASME Annual Meeting New Orleans, Louisiana
- Morel, T. Keribar, R. 1985 “A Model for Predicting Spatially and Time Resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers,” SAE Paper 850204 SAE Congress Detroit 1985
- Morel, T. Fort, E. F. Blumberg, P.N. 1985 “Effect of Insulation Strategy and Design Paremeters on Diesel Engine Heat Rejection and Performance,” SAE Paper 850506 SAE Congress Detroit 1985
- Oguri, T. Inaba, S. 1972 “Radiant Heat Transfer in Diesel Engines,” SAE Paper 720023
- Siegel, R. Howell, J. R. 1981 Thermal Radiation Heat Transfer 2nd McGraw-Hill Book Company New York
- Siegla, D.C. Smith, G.W. 1981 Particulate Carbon-Formation During Combustion Plenum Press 1981
- Sitkei, G. Ramanaiah, G.V. 1972 “A Rational Approach for Calculation of Heat Transfer in Diesel Engines” SAE Paper 720027
- Whitehouse, N.D. Shahad, H.A.K. 1984 “Radiative Heat Transfer Calculations From Soot Clouds for a Quiescent Combustion Chamber Diesel Engine” ASME Symposium FED-20 on Flows in I.C. Engines Uzkan T. Dec 1984 89
- Yuen, W.W. Tien, C.L. 1977 “A Simple Calculation Scheme for the Luminous-Flame Emissivity,” Sixteenth Int. Symp. Combustion The Combustion Institute 1481 1487