This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The influences of Porosity on the Characteristics of Sintered Materials
Annotation ability available
Sector:
Language:
English
Abstract
Porosity is a peculiar characteristic of most sintered materials. As to materials for mechanical applications, the degree of porosity can have a strong effect on the levels of some functional characteristics. Causes determining the presence of pores in sintered materials are reviewed. The analysis of the densification mechanism in pressing allows to obtain the corresponding law between applied pressure and porosity. Characteristics of sintered materials which are depending on porosity are distinguished from those which are connected to the lattice structure. Then, the analytical dependence laws between:
porosity and conductivity, magnetic properties, UTS., fatigue resistance, rupture elongation, apparent hardness, elastic moduli, surface roughness, hardenability, carburizing depth, hardening depth in induction hardening, properties after steam oxidation treatment are obtained.
The achievements fill some gaps still existing in technical literature. The formulae proposed can be applied in the design stage of sintered iron base components.
The availability of sound mathematical formulae to be applied in practice is considered a valid support for the further development of P/M applications.
Recommended Content
Technical Paper | Determination of Stress by Means of Copper Electroplating |
Aerospace Material Specification | Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit |
Journal Article | Investigation of Wear Behavior of Aluminum Alloy Reinforced with Carbon Nanotubes |
Authors
Citation
Bocchini, G., "The influences of Porosity on the Characteristics of Sintered Materials," SAE Technical Paper 860148, 1986, https://doi.org/10.4271/860148.Also In
References
- Kieffer R Hotop W. “Sintereisen und Sinter-stahl,” Springer-Verlag Wien 1948 126
- Bocchini G.F. “Sinterizzati: proprietà fisico-meccaniche, criteri di scelta-dei materiali,” Notiziario Tecnico Amma Torino, Gennaio 1982 22
- Bocchini G.F. “Proposta di tipizzazione degli acciai sinterizzati,” Rivista di Meccanica. No. 809 Maggio 1984 Etas Kompass Milano 107
- Hirschhorn J.S. “Introduction to Powder Metallurgy,” APMI New York 1969 267
- Mosca E. Zocchi R. Senin A. “Selection criteria of soft magnetic sintered materials for electromechanical components and their production processes,” 5th European Symposium on Powder Metallurgy Stockholm 1978
- Ondracek G. Thümmler F. “The porosity effect on properties of sintered materials, as their conductivity and Young modulus of eleasticity,” 5th European Symposium on Powder Metallurgy Stockholm 1978
- Haynes R. “The mechanical behaviour of sintered materials,” Freund Publishing House London 1981
- Eudier M. “Propriétés mécaniques des aciers frittés,” Planseeberichte für Pulvermetallurgie, Reutte 14 April 1966 29
- Peterson R.E. “Stress concentration factors,” John Wiley & Sons New York 1974 150
- Exner H.E. Pohl D. “Fracture behaviour of sintered iron,” Powder Metallurgy International 10 4 1978 193
- Bocchini G.F. Caputo F. “The relationship between hardness and yield strength of some sintered steels,” International Powder Metallurgy Conference in Europe Florence 1982
- Metal Powder Industries Federation “P/M materials standards and specifications,” MPIF Standard No.35 New York 1972
- Bocchini G.F. “Norme di progettazione dei particolari sinterizzati,” Associazione Italiana di’ Metallurgia, Corso sulla metallurgia delle polveri Milano 1975
- Bia A. “Sulla determinazione della durezza dei particolari sinterizzati e ossidati a vapore,” La metallurgia italiana 3 1973 182
- Bocchini G.F. “Le contrȏ le des caractèristiques de durete des aciers frittés et traites,” 4eme Symposium Européen de Metallurgie de Poudres Grenoble Mai 1975
- Jones W.D. “Fundamental Principles of Powder Metallurgy,” Edward Arnolds (Publishers) Ltd. London 1960
- American Society for Metals “Metals Handbook, Vol.4. Heat Treating,” Ninth ASM Metals Park, Ohio 1981 142
- Bocchini G.F. Gallo A. Montevecchi I. “Treatment of sintered steel parts in steam atmosphere,” 2 nd International Congress on Heat Treatment of Materials IFHT Florence 20-24 September 1982