This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Measured and Predicted Friction In Floating-Ring Bearings
Annotation ability available
Sector:
Language:
English
Abstract
Accurate friction and ring-speed measurements for a floating-ring bearing were obtained under controlled radial load and lubricant conditions. The measured friction and ring speeds were compared with an isothermal model. Under load conditions, bearing friction was predicted well. The testing showed that ring rotation had a small effect on bearing friction. The model predicted ring speeds accurately when they did occur experimentally; however, in many instances, the floating ring was found to remain stationary during testing.
Recommended Content
Topic
Citation
Trippett, R., "Measured and Predicted Friction In Floating-Ring Bearings," SAE Technical Paper 860075, 1986, https://doi.org/10.4271/860075.Also In
References
- Shaw, M. C. Nussdorfer, T. J. “An Analysis of the Full-Floating Journal Bearing,” NACA Report No, 866 1947
- Kettleborough, C. F. “Frictional Experiments on Lightly-Loaded Fully Floating Journal Bearings,” Australian j. Appl. Sci. 211 220 1955
- Hill H. C “Slipper Bearings and Vibration Control in Small Gas Turbines,” Trans. ASME 80 1756 1764 1958
- Dworski, J. “High-Speed Rotor Suspension Formed by Fully Floating Hydrodynamic Radial and Thrust Bearings,” Trans. ASME, J. Eng. for Power 86 149 160 1964
- Orcutt, F. K. Ng, C. W. “Steady-State and Dynamic Properties of the Floating-Ring Journal Bearing,” Trans. ASME, J. Lubr. Tech. 90 243 253 1968
- Tatara A. “An Experimental Study of the Stabilizing Effect of Floating-Bush Journal Bearings,” Bull. JSME 13 61 858 863 1972
- Tanaka, M. llori, Y. “Stability Characteristics of Floating Bush Bearings,” Trans. ASME, J. Lubr. Tech. 94 248 259
- Nakagawa, E. Aoki H. “Unbalance Vibration of a Rotor-Bearing System Supported by Floating-Ring Journal Bearings,” Bull. JSME 16 93 March 503 512 1973
- Nikolajsen, J. L. “The Effect of Variable Viscosity on the Stability of Plain Journal Bearings and Floating-Ring Journal Bearings,” ASME Paper 73-Lub-H 1973
- Al-Nasan, I. M. Tarapov, I. E. “On the Hydrodynamic Lubrication Theory of a Bearing with a Bush,” Soviet Appl. Mech. 6 June 645 649 1973
- Yampcl-Skii, I, D. Sarapov, O. P. “Stable Rotation of a Rotor in Friction Bearings with Floating Sleeves,” Russian Eng. J. 55 2 24 26 1975
- Rohde S. M. Ezzat H. A. “Analysis of Dynamically Loaded Floating-Ring Bearings for Automotive Application,” Trans. ASME, J. Lubr. Tech. 102 271 277 1980
- Li, C. H. “On the Steady State and Dynamic Performance Characteristics of Floating Ring Bearings,” Trans. ASME, J. Lubr. Tech. 103 389 397 1981
- Trippett, R. J. “Ball and Needle Bearing Friction Correlations Under Radial Load Conditions,” SAE Paper to be presented in Milwaukee Wisconsin September 1985
- Trippett, R. J. Li, D. F. “High-Speed Floating-Ring Bearing Test and Analysis,” ASLE Transactions 27 1 73 81 1984