This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Two-Stroke Engines-Models for Charge Renovation
Annotation ability available
Sector:
Language:
English
Abstract
The behaviour of fluid flow in piston-ported crankcase-scavenged two-stroke engines is evaluated. Two complementary models of charge renovation are developed: The first model, named the “geometric submodel”, relates the equivalency bases between real designs and sketches of the ducts for the flowing fluid. The other one, named the “analytic submodel”, employs the unidimensional flow theory to study the characteristics variables in the reference sections of the ducts.
An instantaneous Admission Coefficient concept is established and plotted versus crantangle. A Global Admission Coefficient is calculated and its variation versus rpm is obtained.
The models are used to determinate the optimum engine geometry for a given Admission Coefficient.
Authors
Topic
Citation
Muñoz, M., Bethencourt, A., and Salazar-Simpson, J., "Two-Stroke Engines-Models for Charge Renovation," SAE Technical Paper 850084, 1985, https://doi.org/10.4271/850084.Also In
References
- BENSON, R. S. “Experiments on a Piston Controlied Port” The Engineer 210 1960
- BENSON, R. S. POOL, D. E. “The compressible flow discharge coefficients for a two-dimensional slit” Int. J. Mech. Sci. 7 1965
- BENSON, R. S. POOL, D. E. “Compressible-flow through a two-dimensional slit” Int. J. - Mech. Sci. 7 1965
- KHOVAKH, M. “Motor Vehicle Engines” Mir Publishers Moscow 1971
- LICHTY, L. C. “Internal-Combustion Engines” McGraw-Hill Book Company New York, Toronto, -London 1951
- MUÑOZ TORRALBO, M. “El coeficiente de admisión en los motores de dos tiempos” Escuela -Técnica Superior de Ingenieros Industriales Madrid 1971
- SCHWEITZER, P. H. “El barrido de los motores Diesel de dos tiempos” Labor Madrid 1959
- ANNAND, W. J. D. ROE, G. E. “Gas Flow in -the Internal Combustion Engine. Power, Performance, Emission, Control and Silencing” Foulis G T - Sparkfor Yeovil, Somerset 1974
- DANESHYAR, H. “One-Dimensional Compressible Flow” Pergamon Press Oxford 1976
- HUGHES, W. F. BRIGHTON, J. A. “Fluid Dynamics” Schaum Publishing Co. New York 1967
- INRIE, B. W. “Compressible Fluid Flow” Butterworth London 1973
- RUDINGER, G. “Nonsteady duct flow: wave-diagram analysis” Dover Publications, Inc. New York 1969
- BANNISTER, F. K. “Pressure waves in Gases in Pipes” Univ. of Nottingham 1958
- BANNISTER, F. K. MUCKLOW “Wave action -following sudden release of compressed gas - from a cylinder” Proc. I. Mech. E. 159 1948
- BLAIR, G. P. “Further Developments of a 500 cc. Single-Cylinder 2-Cycle Engine for Motorcycle Racing and Moto-Cross Applications” SAE paper 740745
- BLAIR, G. P. “Prediction of Two-Cycle Engine Performance Characteristics” SAE paper 760645
- BLAIR, G. P. “Studying Scavenge Flow in a - Two-Cycle Engine” SAE paper 750752
- BLAIR, G. P. ARBUCKLE, J. A. “Unsteady -Flow in the induction System of a Reciprocating Internal Combustion Engine” SAE paper 700443
- BLAIR, G. P. ASHE, M. C. “The Unsteady -Gas Exchange Characteristics os a Two-Cycle Engine” SAE paper 760644
- BLAIR, G. P. CAHOON, W. L. “A more complete analysis of unsteady gas flow through a high-specific-output two-cycle engine” SAE - Transactions 81 1972 SAE paper - 720156
- BLAIR, G. P. CAHOON, W. L. “Desing and - Initial Development of a High-Specific Output 500 cc. Single Cylinder, Two-Stroke, Racing Motorcycle Engine” SAE paper 710082
- BLAIR, G. P. GOULBURN, J. R. “The Pressure-Time History in the Exhaust System of a High Speed Reciprocating internal Combustion -Engine” SAE paper 670477
- BLAIR, G. P. JOHNSTON, M. B. “Simplified Design Criteria for Expansion Chambers for Two Cycle Gasoline Engines” SAE Transactions 9
- BLAIR, G. P. JHONSTON, M. B. “Unsteady - Flow Effects in Exhaust Systems of Naturally -Aspirated, Crankcase Compression Two-Cycle Internal Combustion Engines” SAE Transactions 77
- DANESHYAR, H. “Numerical solution of gas - flow through and engine cylinder” Inst. J. - Mech. Sci. 10 1968
- DEDOUGLU, N. “Model Investigations on Scavenging and Mixture Formation in the Dual-Fuel or Gas Engine” Sulzer Tech Rev. 51 3 1969
- JANTE A. “Scavenging Plow Ducts of 3-Cycl. 2-Stroke Cycle Engines SAE Transactions 77
- KANNAPAN, A. “On Model Investigations pertaining to Scavenging in Two-Stroke Diesel Engines” ASME paper 71-DGP- 8 April 18 22 1971
- KOTHE, H. “Effect of Non-Symmetrical Scavenging on the Performance of Crankcase-Scavenged Two-Stroke Cycle Spark Ignition Engines” Kraftfahrzeugtechnik 1 1965
- LANCASTER, D. R. KRIEGER, R.B. LIENESCH, J, H. “Measurement and Analysis of -Engine Pressure Data” SAE paper 750026
- NAGAO, F. SHIMAMOTO, Y. “The effect of Crankcase Volume and the Inlet System on the -Delivery Ratio of Two-Stroke Cycle Engines” SAE Transactions 76
- NAITO, H. NOMURA, K. “Some new development Aspects of a Two-Cycle Motor-cycle Engines” SAE paper 710084
- NAITO, H. TAGUCHI, H. “Some development Aspects of a Two-Cycle Motor-cycle Engines” SAE Transactions 75 1966 SAE paper - 660394
- WALLACE, F. J. BOXER, G. “Wave Action - in Diffusers for Exhaust-pipe System, With Special References to the Scavenging of Two-Stroke Engines” Proc. Inst. Mech. Engrs. 170 39 1956
- WALLACE, F. J. LANGELL, P. V. “Theoretical and Experimental Analysis of Air and Gas Flows in a Crankcase Scavenged Two-Stroke Engine Employing Boost Ports” SAE Congress Detroit January 1969
- WALLACE, F. J. NASSIF, M. H. “Airflow in a Naturally Aspirated Two-stroke Engine” Proceedings Institute of Mechanical Engineers 168 1954
- BLAIR, G. P. “Prediction of Two-Cycle Engine Performance Characteristics” SAE paper - 760645
- BONI, A. A. “Numerical Simulation of Flame Propagation in Internal Combustion Engines” SAE paper 780316
- GRUSCHKA, H. D. WECHEN, F. “Gasdinamic Theory of Detonation Gordon and Breach Science Publishers New York 1971
- McCUISTON, F. D. Jr. LAVOIE, G. A. KAUFFMAN, C. W. “Validation of a Turbulent Flame Propagation Model for a Spark Ignition Engine” SAE paper 770045
- POURING, A. A. BLASER, R. F. KEATING, E.L. RANKIN, B. H. “The influence of Combustion with Pressure Exchange on the Performance of Heat Balanced Internal Combustion Engines” SAE paper 770210
- SORENSON, S. C. PAN, S. A. “A One-Diemnsional Combustion Model for a Dual Chamber Stratified Charge Spark Ignition Engine” SAE paper 790355
- SINGH TRILOCHAN SURAKOMOL KOSOL “Mathematical Modeling of Combustion Process in a Spark-Ignition Engine” SAE paper 790354