This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigation of Transonic Inlet Drag Characteristics
Annotation ability available
Sector:
Language:
English
Abstract
Fourteen subsonic axisymmetric inlet models with various forebody contours and geometry parameters were tested in the NASA-Langley Research Center 16-foot transonic wind tunnel. Test Mach numbers ranged from 0.59 to 0.96. A mass flow control throttle (translating plug) allowed mass flow ratios from 0.23 to 0.92. Force and pressure data were acquired for all fourteen inlets, with and without external boundary layer transition strips (grit). The force balance was found to be defective after completion of the test. However, drag data were calculated from wake pressure rake data. Various inlet geometry effects on drag characteristics were analyzed. In particular, drag divergence Mach number was found to correlate with inlet thickness ratio. Experimental pressure and drag data were also compared with predictions from full potential transonic flow codes to verify their reliability and accuracy. The computer codes were found to be useful design tools that can help significantly reduce the number of inlet configurations to be examined experimentally.
Authors
Topic
Citation
Krivec, D., Ling, R., and Vadyak, J., "Investigation of Transonic Inlet Drag Characteristics," SAE Technical Paper 841539, 1984, https://doi.org/10.4271/841539.Also In
References
- Re Richard J. “An Investigation of Several NACA 1-Series Axisymmetric Inlets at Mach Numbers From 0.4 to 1.29,” NASA TM X-2917 1974
- Re Richard J. “An Investigation of Several NACA 1-Series Inlets at Mach Numbers 0.4 to 1.29 for Mass Flow Ratios Near 1.0,” NASA TM X-3324 1975
- Butler S.F.J. “Aircraft Drag Prediction for Project Appraisal and Performance Estimation,” AGARD-CP-124 1973
- Caughey D.A. Jameson A. “Accelerated Iterative Calculation of Transonic Nacelle Flowfields,” AIAA Journal 15 10 October 1977
- Vadyak J. Atta E. “3-D Transonic Nacelle/Inlet Flow Field Computations Using an Efficient Approximate Factorization Algorithm,” First Lockheed Corporate Symposium on Computational Aerodynamics Burbank, California April 1983
- Krivec D.K. “Subsonic Inlet Design Technology Test Plan,” Lockheed Report LR 30205 June 1982