This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Testing and Evaluation of EV-1300 Lead-Acid Modules for the Hybrid Vehicle Application
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents the results of testing and evaluation of GE/Globe EV-1300 lead-acid modules developed by Globe Battery Division of Johnson Controls, Inc. for the hybrid vehicle, HTV-1, developed by General Electric (GE) for the Department of Energy. The design of this battery was derived from that of the Globe Improved State of the Art (ISOA) battery under development for the ETV-1 all-electric vehicle. Key differences in the battery performance requirements for the HTV-1 hybrid vehicle, as opposed to the ETV-1, are higher specific power [137 W/kg versus 104 W/kg sustained for 15 seconds at 50% depth of discharge (DOD)] and less specific energy (36.1 Wh/kg versus 37.5 Wh/kg at a 3h discharge rate). Higher battery power is required for two reasons. First, in HTV-1, the battery is a smaller mass fraction of the design vehicle (341 kg battery/∼1800 kg vehicle = ∼0.19) compared to the ETV-1 (488 kg battery/∼1660 kg vehicle = ∼0.29). Second, the performance requirements for the HTV-1 are referenced to the more-demanding EPA urban driving schedule compared to the SAE J227aD urban driving schedule for the ETV-1. Less specific energy was specified for the HTV-1 to allow the battery developer to concentrate on high specific power; furthermore, petroleum energy is available to achieve extended range. The objective of the hybrid vehicle is to reduce petroleum consumption in overall driving.
Authors
- D.O. Corp
- E.R. Hayes
- E.C. Gay - Argonne National Laboratory, Chemical Technology Div., Argonne, IL
- C.E. Webster - Argonne National Laboratory, Chemical Technology Div., Argonne, IL
- F. Hornstra - Argonne National Laboratory, Chemical Technology Div., Argonne, IL
- N.P. Yao - Argonne National Laboratory, Chemical Technology Div., Argonne, IL
Citation
Corp, D., Hayes, E., Gay, E., Webster, C. et al., "Testing and Evaluation of EV-1300 Lead-Acid Modules for the Hybrid Vehicle Application," SAE Technical Paper 840474, 1984, https://doi.org/10.4271/840474.Also In
References
- Baxa M. S. Weinlein C. E. “Design of an Innovative Lead-Acid Battery for Electric and Hybrid Vehicles,” Extended Abstract 162nd Electrochem. Soc. Meeting Detroit, MI October 17-21, 1982 82-2 11 12 1982
- Thurek D. “Design of an Efficient Electrolyte Circulation System for the Lead-Acid Battery,” Proc. 30th Power Sources Symp. Atlantic City, NJ June 7-10, 1982 89 91 1982
- “The National Battery Test Laboratory, Design Report,” Argonne National Laboratory Report ANL/OEPM-77-4 July 1977
- Hornstra F. Yao N. P. “Standard Test Procedures for Electric-Vehicle Batteries at the National Battery Test Laboratory,” Proc. Soc. Automotive Engineers Technical Paper Series 820401 International Congress and Exposition Detroit, MI February 22-26 1982
- Hornstra F. Christianson C. Corp D. Fredrickson D. Gay E. Hayes E. Webster C. Yao N. P. “Ragone Characteristics of Aqueous Mobile Batteries and Their Application in Projecting Ranges of Electric Vehicles,” Extended Abstracts 164th Electrochem. Soc. Meeting Washington, DC October 9-14, 1983 83-2 592 593 1983
- Hornstra F. Cannon P. Christianson C. Kremesec V. Yao N. P. “Some Effects of Regenerative Braking on Lead-Acid, Nickel/Iron and Nickel/Zinc Batteries,” Extended Abstracts 161st Electrochem. Soc. Meeting St. Louis, MO May 11-16, 1980 80-1 12 14 1980
- Corp D. Berrill E. Fredrickson D. Hogrefe R. Singer L. Webster C. Christianson C. Hornstra F. Yao N. P. “Peak-Power Characteristics of Improved Electric-Vehicle Batteries.” Proc. Soc. Automotive Engineers Technical Paper Series 820178 International Congress and Exposition Detroit, MI. February 22-26 1982