This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Finite Element Modeling Programs for a Two Dimensional CAD Package
Annotation ability available
Sector:
Language:
English
Abstract
Eight 2-D finite element program modules are integrated into an effective analysis tool for improving the productivity in the design cycle. Three preprocessing modules can generate a finite element mesh, display the mesh, and file the finite element model into an inventory of models. Two-dimensional stress analysis, heat transfer analysis, and torsion analysis of the part can be performed. Deformed geometry and contour plots can be used to summarize the analysis results. The usefulness of this integrated approach and the cost effectiveness are illustrated by three examples.
Authors
Citation
Dubensky, R., "Finite Element Modeling Programs for a Two Dimensional CAD Package," SAE Technical Paper 831364, 1983, https://doi.org/10.4271/831364.Also In
References
- Parameter, J. “Computer-Aided Engineering: The Step Beyond CAD/CAM” Machine Design October 23 1980 55 59
- Krouse, J.K. “Off-The-Shelf Software for Mechanical Design” Machine Design April 21 1983 47 52
- Davidson, G.A. “Computer Graphics Design - The Dramatic Conversion of the Work Force” SAE 830261 1983
- Gondert, S. “Evaluating Turnkey CAD/CAM Systems” Machine Design November 25 1982 40 43
- Krouse, J.K. “Computer-Aided Design for Every Pocketbook” Machine Design November 20 1980 89 95
- Orr, J.N. “Comparison: The Ten Top Multi-Station CADD Systems:, Seminar, May” 1983 The CAD/CAM Institute Danbury, Conn.
- DeWyze, J. “Getting Started - First in a Series on Acquiring CAD” Computer Aided Design Report September 1982 1 San Diego, Calif
- Maws S.L. “CAD/CAM Alert” The Management Round Table Chestnut Hills, Mass
- Foundyller, CM. “CAD/CAM on a Shoestring” Machine Design January 21 1982 105 112
- Marshall, P.S. “Do it Yourself CAD/CAM” Machine Design May 6 1982 74 79
- Cavin, D.K. “Hard-Copy Equipment for CAD/CAM” Machine Design February 25 1982 85 88
- Huebner, K.H. The Finite Element Method for Engineers John Wiley & Sons New York 1975 500
- Bowes, W.H. Russell, L.T. Stress Analysis by the Finite Element Method for Practicing Engineers Lexington Books D.C. Heath, Lexington, Mass. 1975
- Reigner, N.F. Steele, J.M. “Basic Course in Finite Element Analysis - Basic Concepts” Machine Design June 25 1981 103 107
- Reigner, N.F. Steele, J.M. “Basic Course in Finite Element Analysis -Modeling” Machine Design July 9 1981 101 105
- Reigner, N.F. Steele, J.M. “Basic Course in Finite Element Analysis -Advanced Techniques” Machine Design July 23 1981 97 100
- Dubensky, R.G. “The Finite Element Method and Computer Aided Engineering - A Users View” A.S.M.E. Design Conference, Session 2.1. - The Finite Element Method in Automated Design Chicago, Illinois April 27 1981
- Dubensky, R.G. “Computer Aided Design of Agricultural Tractors” Amer. Soc. of Agricultural Engineers, Paper No. 79-1556 December 1979
- Khol, R. “Stress Analysis Update” Computer-Aided Engineering March/April 1983 28 37
- Dubensky, R.G. “Integrated Finite Element Methods - A Users Guide”, May” 1983
- Damitio, A. Davis, C. Lechner, J. Ziola, B. “Management of CAD Implementation in a Power Train Design Activity at Chrysler Corporation” SAE 830262 1983