This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Contribution to the Development of a Concept of Driving Mechanics for Commercial Vehicles
Annotation ability available
Sector:
Language:
English
Abstract
In the following essay, vehicle, and test stand related measuring and calculating methods will be introduced which have proven to be a suitable basis for the discussion of the criteria of driving mechanics for commercial vehicles (1 to 23). Because of the progress of electronics development these methods are reliable and quickly performed today.
In connection with tire and brake characteristics, which are the basis for measuring driving maneuvers, and with the knowledge of axle and wheel movement, a purposeful and physically correct evaluation of the driving behavior of vehicles is possible. With the aid of complex mathematical vehicle substitution systems it is already possible to accurately estimate tendencies in the pre-development stage of a vehicle.
Authors
Citation
Mischke, A., Goehring, E., Wolsdorf, P., and von Glasner, E., "Contribution to the Development of a Concept of Driving Mechanics for Commercial Vehicles," SAE Technical Paper 830643, 1983, https://doi.org/10.4271/830643.Also In
References
- Segel, L. “Theoretical Prediction and Experimental Substantiation of the Response of the Automobile Steering Control” Proc Inst. Mech. Engrs 1956 1957
- Bergman, W. “The Basic Nature of Vehicle Understeer-Oversteer” SAE 650085
- Bundorf, R. T. “The Influence of Vehicle Design Parameters on Characteristic Speed and Understeer” SAE 670078
- Chiesa A. Rinonapoli I. “Car Handling Behavior During Severe Maneuvers” FISITA 1968
- Harris A.J. Riley B.S. “Vehicle Behavior in Combined Cornering and Braking” IME 1968
- Dugoff H. Segel L. Erwin R.D. “Measurement of Vehicle Response in Severe Braking and Steering Maneuvers” SAE 710080
- Nordstroem O. Sinha B. “The Influence of Brake Force Distribution on the Dynamic Stability During Braking in a Curve” VTI 1974
- Richter, B. “Driving Simulator Studies: The Influence of Vehicle Parameters on Safety in Critical Situations” SAE 741105
- Zomotor, A. “Ein korrelationsoptisches Verfahren zur direkten Messung von instationaeren Schwimm- und Schraeg-laufwinkeln an Kraftfahrzeugen” ATZ 1975
- Nordmark, S. “Computer programs for simulating a double lane change maneuver with heavy articulated vehicles”, VTI 1976
- Barter, N.F. “Analysis and Interpretation of State and Transient Response Measurements” Vehicle System Dynamics 1975
- Burkhardt M. von Glasner E.-C. “Evaluation of the braking performance of passenger cars with fixed and with ‘kinked’ brake-force distributions” Symposium “Braking of Road Vehicles” Loughborough, England 1976
- Fancher P. Segel L. Bernard J. Erwin R. “Test Procedures for Studying Vehicle Dynamics in Lane Change Maneuvers” SAE 760351
- Rompe, K. Grunow D. Tupova, J. “Erprobung eines Testverfahrens fuer das Bremsen in der Kurve und Ermittlung geeigneter Bewertungskriterien” Institut fuer Sicherheitsforschung im Strassenverkehr, TUV Rheinland 1977
- Bisimis, F. Beckmann H.-D. Roenitz R. Zomotor A. “Lenkwinkel-Sprung und Uebergangsverhalten von Kraftfahrzeugen”, ATZ” 1977
- Fritz, G. “Seitenkraefte und Rueckstell-momente von Personenwagenreifen bei periodischer Aenderung der Spurweite, des Sturz- und Schraeglaufwinkels”, Dissertation, TU-Karlsruhe” 1978
- Zabadneh, M. K. “personenkraftwagen mit einachsigem Anhaenger, Einfluss der Gespannparameter auf die Fahrstabilitaet”, Dissertation, TU-Karlsruhe” 1978
- Heissing, B. “Untersuchung der fahr-dynamischen Eigenschaften von Transportern und Kleinbussen auf der Basis einer mathematischen Fahrzeugsimulation”, Dissertation, TH Aachen” 1979
- ISO “Road Vehicles - Steady State Circular Test Procedure. ISO - Norm-vorschlag” IS0/DIS 3148, 1979
- Goehring, E. Wolsdorf P. von Glasner, E.-C. “Beurteilung von Bremskraftverteilungen und deren Einfluss auf das Bremsverhalten von Nutzfahrzeugen”, AI” 1979
- Goehritig, E. Wolsdorf, P. von Glasner, E.-C. “Evaluation of the Brake-Force Distribution and its Influence on the Braking Performance of Light Commercial Vehicles” SAE 800523
- Slama, S. “Ermittlung von Achskenndaten leichter Nutzfahrzeugen auf einem servohydraulischen Pruefstand” Diplomarbeit, TU Stuttgart 1980
- Goehring, E. Wolsdorf P. von Glasner E.-C. “Beitrag zur Entwicklung eines fahrmechanischen Konzepts fuer Nutzfahrzeuge”, AI” 1980