This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of High-Strength Cold-Rolled Steel Sheets for Automotive Use by Continuous Annealing
Annotation ability available
Sector:
Language:
English
Abstract
High-strength cold-rolled steel sheets having tensile strength of from 350 to 1,500 MPa with a wide variety of features have been developed by using the continuous annealing process consisting of water-quenching system. Newly developed high-strength steels include dual-phase steels with high bake-hardenability, dual-phase steels with low yield ratio and excellent ductility, dual-phase steels with high deep drawability, ultra high-strength steels and extra deep drawing high-strength steels.
This paper describes the metallurgical characteristics of the products of the continuous annealing process consisting of water-quenching system, processing conditions and mechanical properties of these high-strength steels, and their application to automobiles.
Recommended Content
Technical Paper | A New Concept in Formable High Strength Steel |
Technical Paper | A Computer Controlled Power Tool for Servicing the Hubble Space Telescope |
Technical Paper | High Strength Cold-Rolled Sheet Steels for Automobiles |
Authors
Citation
Osawa, K., Shimomura, T., Kinoshita, M., Matsudo, K. et al., "Development of High-Strength Cold-Rolled Steel Sheets for Automotive Use by Continuous Annealing," SAE Technical Paper 830359, 1983, https://doi.org/10.4271/830359.Also In
References
- Osaka, S. Tanaka, N. Matsudo, K. Fukuoka Y. Ishioka, H. “Continuous Annealing and Finishing Line for Cold Rolled Strip” Iron and Steel Engineer 1980 67 72
- Matsudo, K. Shimomura, T. Osawa, K. Okuyama, T. Kinoshita M. Osaka, S. “Production of High Strength Cold Rolled Steel Sheets by the NKK Continuous Annealing Line Process (NKK-CAL Process)” Nippon Kokan Technical Report Overseas , No. 29 1980 1 9
- Nakaoka, K. Araki K. Kurihara, K. “Strength, Ductility and Aging Properties of Continuously Annealed Dual-Phase High Strength Sheet Steels” 121 141 Formable HSLA and Dual-Phase Steels A.T. Davenport AIME New York N.Y 1979
- Nishimoto, A. Hosoya Y. Nakaoka, K. “Relation Between Hole Expansion Formability and Metallurgical Factors in Dual-Phase Steel Sheet” 447 463 Fundamentals of Dual-Phase Steels R. A. Kot B. L. Bramfitt AIME New York N.Y 1982
- Matsudo, K. Shimomura T. Nozoe, O. “Effect of Carbide Size, Cold Reduction and Heating Rate in Annealing on Deep-Drawability of Low Carbon, Capped Cold Roiled Steel Sheet” Texture of Crystalline Solids 3 1978 53 72
- Nishimoto, A. Hosoya Y. Nakaoka, K. “A New Type of Dual-Phase Steel Sheet for Automobile Outer Body Panels” Trans. ISIJ 21 1981 778 782
- Okamoto, A. Hayashi, Y. Takahashi M. Sugisawa, S. “Bake-Hardenable Al-Killed Steel (RBH-35) for Automobile Body Panels” SAE Paper 820018 1982
- Lake P. B. Grenawalt, J.J. “Properties and Application of High Strength Cold-rolled Steels; Plain Carbon and Killed Low Alloy” SAE Paper 740954 1974
- McFarland W. H. Taylor, H. L. “Properties and Applications of Low Carbon Martensite Steel Sheets” SAE Paper 690263 1969
- Nakaoka, K. Hosoya, Y. Ohmura M. Nishimoto, A. “Reassesment of the Water-Quench Process as a Means of Producing Dual-Phase Formable Steel Sheets” 330 345 Structure and Properties of Dual-Phase Steels R. A. Kot J. W. Morris AIME New York N.Y. 1979
- Takechi, H. Takahashi, N. Abe, M. Akisue, O. Koyama, K. “High Strength Cold-Rolled Steels Produced by Continuous Annealing and Their Automotive Applications” SAE Paper 810028 1981
- Ohashi, N. Irie, T. Satoh, S. Hashimoto O. Takahashi, I. “Development of Cold Rolled High Strength Steel Sheet with Excellent Deep Drawability” SAE Paper 810027 1981