This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dynamic Behaviour of an Elastic Connecting–Rod Bearing – Theoretical Study
Annotation ability available
Sector:
Language:
English
Abstract
The dynamic behavior of an elastic connecting-rod bearing is studied using an iterative method. Short bearing approximation for Reynolds’ equation and plane elasticity relations for the bearing housing are used for this study.
The locus of the shaft center in the bearing is calculated for the dynamic loading conditions of a connecting-rod bearing. Instantaneous elastic deformations and pressure distributions are given for different values of the load (or time). Variations of minimum film thickness, torque and flow rate versus shaft rotation are compared with those obtained for a rigid bearing housing and under the same dynamic conditions.
Recommended Content
| Technical Paper | Influence of the Effective Viscosity on Bearing Performance |
| Technical Paper | Numerical Solution for Contact Pressure Distributions in Misaligned Self-Lubricated Journal Bearings |
Authors
Citation
Fantino, B., Godet, M., and Frêne, J., "Dynamic Behaviour of an Elastic Connecting–Rod Bearing – Theoretical Study," SAE Technical Paper 830307, 1983, https://doi.org/10.4271/830307.Also In
References
- Fantino B. “Influence des défauts de forme dans la lubrification hydrodynamique” Thèse de Doctorat de spécialité Université Claude Bernard Lyon 1973
- Fantino E. Frêne J. “Etude des déformations de coussinets de bielle, sous l’effet des pressions hydrodynamiques” Journal de Mécanique Appliquée 2 n° 3 1978 367 383
- Fantino B. Frêne J. Duparquet J. “Elastic connecting rod bearing with piezoviscous lubricant: analysis of the steady state characteristics” JOLT-ASME 101 n° 2 April 1979 190 200
- Frêne J. Dessailly R. Fantino B. “Hydrodynamics of an elastic connecting rod bearing: comparison of theoretical and experimental results” Fifth Leeds-Lyon symposium on Tribology Leeds England Sept. 1978 Dowson, D. Taylor, C.M. Godet M. Berthe. D. “Elastohydrodynamic and Related Topics” Mechanical Engineering Publications Ltd London 329 336
- Pierre Eugène J. Frêne J. Fantino B. Roussel G. Duparquet J. “Theory and experiments on elastic connecting-rod bearings under steady state conditions” 9th Leeds-Lyon symposium on Tribology Leeds England September 1982 Dowson, D. Taylor, C.M. Godet M. Berthe. D. Westbury House
- Hahn H.W. “Dynamically loaded journal bearing of finite length” IME Proceeding of the conference on lubrication and wear 1957 100
- Carl T.E. “The experimental investigation of a cylindrical journal bearing under constant and sinusoidal loading” 2nd conv. lubrication and Wear, Proc. Inst. Mech. Engrs 1963–1964 178 Pt 3N Paper 19 100 119
- Radermacher K. “Cylindrical plain bearings under loads varying in magnitude and direction” Paper 23. Lubrication and Wear convention 1964
- Horsnell R. Mc Callion H. “Prediction of some journal bearing characteristics under static and dynamic loading” Paper 12. Lubrication and Wear convention 1963
- Lloyd T. Horsnell R. Mc Callion H. “An investigation into the performance of dynamically loaded journal bearing theory” Paper 6. Journal bearing for reciprocating and turbo machinery 1966 181 Pt3B 1 8
- Booker J.F. “Dynamically loaded journal bearing: mobility method of solution” Journal Basic Eng. Trans. ASME, series D 1965 87 n° 3 537 546
- Warner P.C. “Static and dynamic properties of partial journal bearings” Journal of basic eng. Trans. ASME, series D 1963 85 247 257
- Campbell J. Love P.P. Martin F.A. Rafique S.O. “Bearings for reciprocating machinery: a review of the present state of theoretical, experimental and service knowledge” Institution of Mechanical Engineers 182 1967-63 1 34
- Martin F.A. “Developments in engine bearings” 9th Leeds-Lyon symposium on Tribology Leeds England September 1982 Dowson, D. Taylor, C.M. Godet M. Berthe. D. Westbury House
- Ross J.M. Slaymaker R.P. “Journal center orbits in piston engine bearings” Society of Automotive Engineers. International Automotive Engineering Congress Detroit January 1969 1 22
- Booker J.F. “Dynamically loaded journal bearings. Numerical application of the mobility method” JOLT-ASME january 1971 series F 168 176
- Hiruma M. Furuhama S. “Measurement of the journal locus in the conrod big-end bearing of an automobile gasoline engine” JOLT-ASME april 1973 series F 249 258
- Nemec K.L. “Some new research results of deformation and stress in thin-walled half-bearings assembled in diesel engines” Symposium Tchécoslovaque 1972 3 571 592
- Wechsler L. “An analysis of partial arc bearings including effects of elasticity and viscosity” Naval Engineers J., USA 2 1973 85 n° 1 50 58
- Goodwin G. Holmes R. “On the continuous monitoring of oil film thickness in an engine bearing” Proc. Inst. Mech. Engrs. 192 1978 371 376
- Goodwin G. Holmes R. “On bearing deformation and temperature distribution in dynamically loaded engine bearings” Proc Mech. Engrs. C2 82 1982 no. 9–15
- Higginson G.R. “The theoretical effects of elastic deformation of the bearing liner on journal bearing performance” Proceeding of the symposium on Elastohydrodynamic lubrication. Inst. Mech. Engrs 1965–66 180 Pt 3B paper 1 31 38
- Brighton D.K. Hooke C.J. O’Donoghue J.P. “A theoretical and experimental investigation of the effect of elastic distorsions on the performance of journal bearings” Proc. Inst. Mech. Engrs 1967–68 Pt 3N Paper 23 192 200
- Ibrahim S.M. Mc Callion H. “Elastic distorsion of journal bearing problem” Proc. Inst. Engrs. 182 Part3N Paper 22 1967–68 183 191
- Oh K.P. Huebner K.H. “Solution of the Elastohydrodynamic Finite Journal bearing problem” ASME JOLT 95 n°3 1973 342 352
- Reddi M. “Finite element solution of the incompressible lubrication problem” JOLT-ASME 91 n° 3 1969 524 533
- Booker J.F. Huebner K.H. “Application of finite element methods to lubrication: an engineering approach” JOLT-ASME 1972 94 n°4 313 329
- Bozaci A. Dudley B.R. Middleton V. Allen D.G. “Steady load performance of a journal bearing with an elastic housing” 5th Leeds- Lyon Symposium on tribology Leeds England Sept. 1978 Dowson, D. Taylor, C.M. Godet M. Berthe. D. “Elastohydrodynamic and Related Topics” , Mechanical Engineering Publications Ltd London 320 328
- Stafford A.C. Henshell R.D. Dudley B.R. “Finite element analysis of problems in elastohydrodynamic lubrication” 5th Leeds-Lyon Symposium on Tribology Leeds England Sept. 1978 Dowson, D. Taylor, C.M. Godet M. Berthe. D. “Elastohydrodynamic and Related topics” Mechanical Engineering Publications Ltd London 35 41
- Rohde S.M. Oh K.P. “A unified treatment of thick on thin film elastohydrodynamic problems by using higher order element methods” Proc. R. Soc. London, Series A 343 1975 315 331
- Rohde S.M. Whicker D. Browne A.L. “On the solution of elastohybrid lubrication problems” ASLE, Trans. 21 n° 3 1978 261 270
- Oh K.P. Rohde S.M. “Numerical solution of the point contact problem using the finite element method” International Journal for Numerical Method in Engineering 11 1977 1507 1518
- Taylor C O’Callaghan J.F. “A numerical solution of the elastohydrodynamic lubrication problem using finite elements” Journal Mechanical Engineering Science 14 n° 4 1972 229 237
- Fantino B. “Influence des défauts de forme et des déformations élastiques des surfaces en lubrification hydrodynamique sous charges statiques et dynamiques” Thèse de Docteur d’Etat ès Sciences Le 15 Décembre 1981 Université Claude Bernard Lyon I
- Conway H.D. Lee H.C. “The lubrication of short flexible journal bearings” ASME Journal of Lubrication Technology 99 n° 3 1977 376 378
- Zienkiewicz O.C. “The finite element method in engineering science” Mc Graw-Hill 1971 Version Française, La méthode des éléments finis Ediscience