This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Shot Peening of Metals — Mechanics and Structures
Annotation ability available
Sector:
Language:
English
Abstract
Shot peening is viewed as a process involving multiple and progressively repeated impact. The residual stress field under each impact interacts with similarly produced neighbouring fields to finally produce a residual stress distribution varying in depth but uniform in planes, parallel to the surface. Statical and dynamical aspects of single impact are considered and a number of simple theoretical expressions for the parameters of the process are presented. New concepts such as shakedown, reversed plastic yielding and Bauschinger effect as well as strain rate are thought to contribute a significant role in the process.
Recommended Content
Aerospace Material Specification | Brazing Filler Metal, Paste, Copper Water Thinning |
Aerospace Material Specification | Plastic: Polyimide for Molded Rod, Bar, and Tube, Plaque, and Formed Parts |
Technical Paper | New Developments in Mechanical Fastening of Thermoplastics: Aluminum Self-Tapping Screws Trump Steel |
Authors
Citation
Al-Hassani, S., "The Shot Peening of Metals — Mechanics and Structures," SAE Technical Paper 821452, 1982, https://doi.org/10.4271/821452.Also In
References
- Proc. First International Conference on Shot Peening Paris Pergamon Press Sept. 1981
- Goldsmith, W. Impact Arnold London 1960
- Johnson, W. Impact Strength of Materials Arnold London 1972
- Al-Hassani, S.T.S. Mechanical Aspects of Residual Stress Development in Shot Peening Proc. 1st Int. Conf. Shot Peening Paris 583 602 Pergamon Press. Sept. 1981
- Timoshenko, S. Goodier, J.H. Theory of Elasticity McGraw Hill New York 1951
- Shaw, M.C. de Salvo, G. “On the plastic flow beneath a blunt axisymmetric indenter” Trans. ASME J. Eng. Industry 92 480 493 1970
- Meguid, S.A. Johnson, W. Al-Hassani, S.T.S. “Some factors in the shot peening and peen-forming processes” Proc. 17th Int. Machine Tools Design & Research Conf. Birmingham 3 653 659 McMillans. Sept. 1976
- Shield, R.T. “On plastic flow of metals under conditions of axial symmetry” Proc. Roy. Soc 223 267 1955
- Tabor, D. The Hardness of Metals Oxford Univ. Press 1951
- Al-Obeid, Y. “Finite element approach to shot peening mechanics”
- Johnson, K.L. The Correlation of Indentation Experiments J. Mech. & Phys. Solids 18 115 1970
- Engel, I.A. Impact on a Worn Surface de Paten A.D. Kalker J.J. “The mechanics of the contact between deformable bodies” 239 253 Delft Univ. Press 1975
- Kachanov, L.M. Fundamentals of the Theory of Plasticity MIR Publishers Moscow 1974
- Johnson, W. Mellor, P.B. Plasticity for Engineers Van Nostrand London 1962
- Hills, D.A. Ashelby D.W. “The influence of residual stresses on contact load bearing capacity” Wear 65 No. 2 221 240 1982
- Johnson, K.L. Inelastic Contact: Plastic Flow and Shakedown privately communicated draft of a paper to be presented at a Conference in Vancouver July 1982
- Singh, K.P. Paul, B. Woodward, W.S. “Contact stresses for multiply-connected Regions -”
- Johnson, K.L. “Deformation of a plastic wedge by a rigid flat die under the action of a tangential force force” J. Mech. & Phys. Solids 16 395 402 1968
- Lowe, W.T. Al-Hassani, S.T.S. Johnson, W. “Impact behaviour of small scale model motor coaches” Proc. I. Mech. E. Automobile Div 186 36 409 419 1972
- Clausen, R. Ermittlung Von Einflussgrōssen Beim Kungelstrahlen Durch Einzelkornversuche 279 285
- Hailing, J. Nuri, K.A. “Contact of rough surfaces of work-hardening materials” Proc. Symp. 1974 Int. Un. Theor. Applied Mechanics (IUTAM) de Paten A.D. Kalker J.J. Delft University Press 1975
- Olson, G.B. Mescall, J.F. Azrin, M. Adiabatic Deformations and strain localization Meyers Murr “Shock Waves and High Strain Rate Phenomena in Metals” Plenum 221 247 1981
- Shockey, D.A. Erlich, D.C. Metallurgical Influences on Shear Bond Activity ditto 249 261
- Al-Hassani, S.T.S. Johnson, W. The dynamics of the fragmentation process for spherical shells containing explosives Int. J. Mech. Sci. 11 No. 10 811 1969
- Al-Hassani, S.T.S. Johnson, W. Dynamic Deformation and Fragmentation of Strain-hardening, Strain-rate Sensitive Shells Containing High Explosives Proc. 11th Int. MTDR Conf. Birmingham, U.K. 1970
- Salem, S.A.L. Al-Hassani, S.T.S. Johnson, W. “Measurements of surface pressure distribution during jet impact” Proc. 5th Int. Conf. “Erosion by Liquid and Solid Impact” Cambridge, U.K. 1979
- Flavenot, J.F. Nikulari, A. La Mesure des Contraintes Residuelles: Methode de la (Fleche) Methode de la (Source de Contraintes) Les Memoires Techniques du CETIM 31 1977