This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Rationale for Advances in the Technology of I. C. Engines
Annotation ability available
Sector:
Language:
English
Abstract
This paper is based upon the premise that the best way to deal with current constraints imposed upon car engines is by technological advances designed to (1) minimize pollutant emissions, (2) maximize engine efficiency, and (3) optimize tolerance to a wider variety of fuels. A sense of direction for such advances is derived from a critical assessment of the fundamental advantages of reciprocating I.C. engines as prime movers for automobiles, and the review of their recent developments. On this basis it is shown that major impact in this respect could be made by control1ed combustion. Intrinsically, this should involve proper handling of active radicals, the essential elements of the combustion reaction. Practically, this can be achieved by a variety of means, such as charge stratification, exhaust gas recirculation, homogeneous lean burn, combined with enhanced ignition and enhanced auto-catalysis.
Recommended Content
Technical Paper | A Lean-Burn Catalytic Engine |
Technical Paper | Extending Lean Limit with Mass-Timed Compression Ignition Using a Catalytic Plasma Torch |
Authors
Topic
Citation
Dale, J. and Oppenheim, A., "A Rationale for Advances in the Technology of I. C. Engines," SAE Technical Paper 820047, 1982, https://doi.org/10.4271/820047.Also In
References
- Oppenheim A. K. Weinberg, F. J. “Combustion R&D: Key to our Energy Future.” Astronautics and Aeronautics, November 1974
- Oppenheim, A. K. “Prospects for Internal Combustion Engines Among Advanced Energy Conversion Systems.&rdquo” SAE Reprint 789652, The 13th Intersociety Energy Conversion Engineering Conference 1978
- Lauck, F. Uyehara, O. A. Myers, P. S. “An Engineer Evaluation of Energy Conversion Devices.&rdquo” SAE Automotive Engineering Congress Detroit, Michigan 1962
- Gutkowicz-Krusin, D. Procaccia, I. Ross, J. “On the Efficiency of Rate Processes. Power and Efficiency of Heat Bngines.&rdquo” J. Chem. Phys. 69 9) 3898 3906 1978
- Dale J. D. Oppenheim, A. K. “Enhanced Ignition for I.C. Engines with Premixed Gases.&rdquo” SAE Reprint 810146, International Congress and Exposition Detroit, Michigan 1981
- Klajn M. Oppenheim, A.K. “Influence of Exothermicity on the Shape of a Diffusion Flame.&rdquo” submitted to the 19th Symposium (international) on Combustion Haifa, Israel 1982
- Weinberg, F. J. “The First Half-Million Years of Combustion Research and Today’s Burning Problems.&rdquo” Plenary Lecture, Fifteenth Symposium (International) on Combustion, The Combustion Institute Pittsburgh, Pa. 1 17 1974
- Westbrook, C. Private Communication, Lawrence Livermore Laboratory, University of California 1981
- Andrews G. E. Bradley, D. “The Burning Velocity of Methane-Air Mixtures&rdquo” Combustion and Flame 19 275 288 1972
- Keller, J.O. Vaneveld, L. Korschelt, D. Ghoniem, A. F. Daily, J.W. Oppenheim, A.K. “Mechanism of Instabilities in Turbulent Combustion Leading to Flashback.&rdquo” AIAA Paper 81-0107, to be published in the AIAA Journal 1981
- Oppenheim, A.K. Teichman, K. Horn, K. Stewart, H.E. “Jet Ignition of an Ultra-Lean Mixture&rdquo” SAE Transactions, Section 3 87 2416 2428 1978
- Cetegen, B. Teichman, K.Y. Weinberg, F.J. Oppenheim, A.K. “Performance of a Plasma Jet Igniter.&rdquo” SAE Paper 800042 , Congress and Exposition, Detroit, Michigan 1980
- Lee, J.H. Soloukhin, R.I. Oppenheim, A.K. “Current Views on Gaseous Detonation&rdquo” Astronautica Acta 14 565 584 1969
- Oppenheim, A.K. Soloukhin, R.I. “Experiments in Gasdynamics of Explosions.&rdquo” Annual Review of Fluid Mechanics 5 31 58 1973
- Longwell J.P. Weiss, M.A. “High Temperature Reaction Rates in Hydrocarbon Combustion&rdquo” Industrial and Engineering Chemistry 47 8 1634 1643 1955
- Crocco, L. Glassman, I. Smith, I.E. “A Flow Reactor for High Temperature Reaction Kinetics.&rdquo” Jet Propulsion 27 7 1266 67 1957
- Crocco, L. Glassman, I. Smith, I.E. “Kinetics and Mechanism of Ethylene Oxide Decomposition at High Temperatures.&rdquo” The Journal of Chemical Physics 31 2 506 510 1959
- Oppenheim, A. K. Cohen, L. M. Short, J. M. Cheng, R. K. Horn, K. “Shock Tube Studies of Exothermic Processes in Combustion&rdquo” Modern Developments in Shock Tube Research (Edited by: G. Kamimoto), Proceedings of the Tenth International Shock Tube Symposium Kyoto, Japan 557 568 1975
- Noguchi, M. Tanaka, Y. Tanaka, T. Takeuchi, Y. “A Study on Gasoline Engine Combustion by Observation of Intermediate Reactive Products During Combustion,&rdquo” SAE Paper 790840
- Onishi, S. Jo, S. H. Shoda, K. Jo, P. D. Kato, S. “Active Therrno-Atmosphere Combustion (ATAC)--A New Combustion Process for Internal Combustion Engines,” SAE Paper 790501
- Guirguis, R. H. Oppenheim, A. K. Karasalo, I. Creighton, J.R. “Thermochemistry of Methane Ignition” Progress in Astronautics and Aeronautics 76 134 153 1981
- Frank-Kamenetskii, D.A. Diffusion and Heat Exchange in Chemical Kinetics. Transl. by N. Thon, Princeton University Press 370 1955
- Semenov, N.N. Some Problems in Chemical Kinetics and Reactivity. Transl. by M. Boudart, Princeton University Press 1 239 1958
- Uyehara, O.A. Myers, P.S. Marsh, E. E. Cheklich, G. E. “A Classification of Reciprocating Engine Combustion Systems,” SAE Paper 741156
- Newhall, H.K. “Combustion Process Fundamentals and Combustion Chamber Design for Low Emissions,” SAE Paper 751001
- May, M.G. “The High Compression Lean Burn Spark Ignited 4-Stroke Engine,” I. Mech. E. Paper C97/79 1979
- Daniel, W.A. “Flame Quenching at the Walls of an Internal Combustion Engine, Sixth Symposium (International) on Combustion, The Combustion Institute Pittsburgh, Pa. 886 894 1956
- Tabaczynski, R.T. Heywood, J.B. Keck, J.C. “Time-Resolved Measurements of Hydrocarbon Mass Flow Rate in the Exhaust of a Spark-Ignition Engine,” SAE Transactions 81 379 398 1973
- Oppenheim, A.K. Cheng, R.K. Teichnsan, K. Smith, O.I. Sawyer, R.F. Horn, K. Stewart, H.E. “A Cinematographic Study of Combustion in an Enclosure Fitted with a Reciprocating Piston,” Paper C256/76, Stratified Charge Engines, I. Mech. E. Conference Publications 1976-11 London 127 135 November 1976
- Westbrook, C.K. Adamczyk, A. A. Lavoie, G.A. “A Numerical Study of Laminar Flame Wall Quenching,” Combustion and Flame 40 1 81 99 1981
- Sellnau, M.C. Springer, G.S. Keck, J.C. “Measurements of Hydrocarbon Concentrations in the Exhaust Products from a Spherical Combustion Bomb,” SAE Paper 810148
- Novak J.M. Blumberg, P.N. “Parametric Simulation of Significant Design and Operating Alternatives Affecting the Fuel Economy and Emissions of Spark-Ignited Engines,” SAE Transactions 87 3485 3511 1979
- Dale, J.D. Smy, P.R. Clements, R.M. “Laser Ignited Internal Combustion Engine--An Experimental Study,” SAE Paper 780329
- Gussak, L.A. “High Chemical Activity of Incomplete Combustion Products and a Method of Prechamber Torch Ignition for Avalanche Activation of Combustion in Internal Combustion Engines,” SAE Transactions 84 2421 2445 1976
- Gussak, L.A. “LAG-Process, Some Results of Utilisation in Transport and Mechanical Engineering,” SAE Paper 789651, Proceedings of the 13th Inter-society Energy Conversion Engineering Conference 3 2153 2163 1978
- Gussak, L.A. Karpov, V.P. Tikhonov, Yu. V. “The Application of LAG-Process in Prechamber Engines,” SAE Paper 790692 1979
- Weinberg, F.J. Horn, K. Oppenheim, A.K. Teichman, K. ”Ignition by Plasma Jet,” Nature 272 5651 341 343 1978
- Asik, J.R. Piatowski, P. Foucher, M.J. Rado, W.G. “Design of a Plasma Jet Ignition System for Automotive Application,” SAE Paper 770355
- Topham, D.R. Smy, P.R. Clements, R.M. “An Investigation of a Coaxial Spark Igniter with Emphasis on Its Practical Use,” Combustion and Flame 25 2 187 196 1975
- Dale, J.D. Smy, P.R. Clements, R.M. “The Effects of a Coaxial Spark Igniter on the Performance of and the Emission from an Internal Combustion Engine,” Combustion and Flame 31 2 173 185 1978
- Lewis J.M. Tierney, W.T. “United Parcel Service Applies Texaco Stratified Charge Engine Technology to Power Parcel Delivery Vans,” Progress Report, SAE Paper 801429
- Date, T. Yagi, S. Ishizuya, A. Fujji, I. “Research and Development of the HONDA CVCC Engine,&rdquo” SAE Paper 740605
- Wang, T.S. Zhang, Y.F. Zhao, H.F. Qi, Z.M. Ren, A.F. “A Study of Ignition by Flame Torches,” Eighteenth Symposium (International) on Combustion, The Combustion Institute Pittsburgh, PA. 1729 1736 1981
- de Soete, G.G. “Compared Effects of Single Chamber and Dual Chamber Charge Stratification on NOX Emission and Combustion Efficiency,” Paper C252/76, Stratified Charge Engines, I. Mech. E. Conference Publications London 95 192 1976
- Furukawa J. Gomi, T. “On the Propagation of Turbulent Jet-Flame in a Closed Vessel,&rdquo” SAE Paper 810777 , Passenger Car Meeting, Dearborn, Michigan 1981
- Watanabe E. Fukutani, I. “Reduction of Diesel Idle Knock by EGR,” SAE Paper 810296