This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mechanical Properties of Compacted Graphite Cast Iron
Annotation ability available
Sector:
Language:
English
Abstract
Data from mechanical property evaluations of compacted graphite iron are summarized and reviewed. A significant amount of information is presented regarding the influence of structure, composition, and processing variables on compacted graphite iron tensile properties, while compression, shear, fatigue, and impact data is limited. Little testing has been conducted to establish bending and elevated temperature properties, and further research will be necessary to insure the acceptability of compacted graphite iron for specific applications.
Recommended Content
Journal Article | Fatigue Assessment of Nodular Cast Iron with Material Imperfections |
Authors
Citation
Ruff, G., "Mechanical Properties of Compacted Graphite Cast Iron," SAE Technical Paper 810209, 1981, https://doi.org/10.4271/810209.Also In
References
- Riposan I. Sofroni L. “Stability of the Effect of Magnesium Treatment in Compacted Graphite Cast Iron,” AFS International Cast Metals Journal
- Dawson J. V. et al “Some Effects of Nitrogen in Cast Iron,” BCIRA Journal 4 June 1953 540
- Mountford F. A. “The Influence of Nitrogen on Strength, Soundness, and Structure of Gray Cast Iron,” The British Foundryman 69 April 1966 141
- Ruff G. F. Vert T. C. “Investigation of Compacted Graphite Iron Using a High Sulfur Gray Iron Base,” AFS Transactions 87 1979 459
- Estes J. W. Schneidewind R. “New High Strength Cast Irons Produced by Injection Methods,” AFS Transactions 63 1955 541
- Ruff G. F. Doshi B. K. “Relation Between Mechanical Properties and Graphite Structure in Cast Irons,” 37th Electrical Furnace Conference Detroit, Michigan December 1979
- Sergeant G. F. Evans E. R. “The Production and Properties of Compacted Graphite Iron” “The British Foundryman”
- Shimojima S. et al “Some Properties of Vermicular Graphite Cast Iron,” 58th Ductile Iron Licensee Conference June 7, 1978
- Bates C. E. “Production Control and Properties of Compacted Graphite Iron,” Proposal for Group Sponsored Research, Southern Research Institute October 19 1979
- Gyarmaty A. M. The Effects of Foundry Processing Variables on Some Properties of Magnesium-Titanium Treated Compacted Graphite Cast Iron Master of Science Thesis University of Wisconsin-Madison 1979
- Patierno V. et al “Microstructural Characterization and Mechanical Properties of Various Grades of Nodularity in S. G. Iron,” 44th International Foundry Congress Paper Number 4 September, 1977
- Aleksandrov N. N. et al “Production and Properties of High-Duty Iron with Compacted Graphite,” Russian Castings Production August 1976 319
- Loper C. R. et al “Microstructure-Mechanical Property Relationships In Compacted (Vermicular) Graphite Cast Irons,” 46th International Foundry Congress Madrid, Spain September, 1979
- Cooper K. P. Loper C. R. “Some Properties of Compacted Graphite Cast Iron,” AFS Transactions 86 1978 241
- Sissener J. et al “Use of Cast Iron with Vermicular Graphite from the Industrial and Economy Standpoint,” Giesserei-Praxis, No. 22 1972 396
- Palmer K. B. “Mechanical Properties of Compacted Graphite Irons,” BCIRA Journal, Report 1213 January 1976 31
- United States Patent, No. 3,421,886 January 14 1969
- Ruff G. F. Mechanical Properties of Gray Iron Unpublished Report Iron Castings Society Cleveland, Ohio 1979
- Ruff G. F. Mechanical Properties of Ductile Iron Unpublished Report to Iron Castings Society, Cleveland, Ohio 1979
- Holzmuller A. “Cast Iron with Vermicular Graphite-A Special Material for Engine Construction,” Giesserei 1976 281
- Roehrig K. “Thermal Fatigue of Gray and Ductile Irons,” AFS Transactions 86 1978 75