This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Application of EHL Theory to Gear Lubrication
Annotation ability available
Sector:
Language:
English
Abstract
The concept of EHL, and simplified equations for calculating the isothermal elastohydrodynamic lubricant film thickness between meshing gear teeth, are presented. The only physical property of the lubricant required is the lubricant parameter (LP), which combines both the viscosity and the viscosity-pressure characteristics. The value of LP can accurately be determined by direct measurement of the oil film thickness in an optical EHL apparatus. Since LP is dependent on temperature, measurements are made at different temperatures and the data presented in the form of charts of LP vs. temperature.
The quality of lubrication of gears can be expressed as the ratio of the EHL film thickness to the composite surface roughness of the gear teeth, frequently called the specific film thickness. Data relating the probability of gear distress to the specific film thickness will be reviewed. Lubricant selection for a desired value of the specific film thickness can be made through LP.
Under certain operating conditions the EHL film thickness may be significantly less than that calculated from theory. Correction factors are provided for non-isothermal conditions and for lubricant starvation in the EHL contact of meshing gear teeth. Effects of VI-improved and non-Newtonian oils are considered.
Recommended Content
Authors
Topic
Citation
Jackson, A. and Rowe, C., "Application of EHL Theory to Gear Lubrication," SAE Technical Paper 800670, 1980, https://doi.org/10.4271/800670.Also In
References
- Fowles P. E. “EHL Film Thickness -- Practical Significance and Simple Computation” Lub. Engr. 32 4 1976 165 178
- Peklenik J. “New Developments in Surface Characterization and Measurements by Means of Random Process Analysis” Proc. Inst. Mech. Engrs. 182 3K 1967–1968 108 126
- Wellauer E. J. “AGMA Experience in Establishing Coordinated Gear Rating Standards” Presented at JSME 1967 Semi-International Symposium Tokyo, Japan
- Wellauer E. J. Holloway G. A. “Application of EHD Oil Film Theory to Industrial Gear Drives” Trans. ASME, J. Eng. for Ind. 98B 2 1976 626 634
- Foord C. A. Wedeven L. D. Westlake F. J. Cameron A. “Optical Elastohydrodynamics” Proc. Inst. Mech. Engrs. 184 1969 487 505
- Jones, W. R. Jr. Johnson R. L. Winer W. O. Sanborn D. M. “Pressure-Viscosity Measurements for Several Lubricants to 5.5×10 8 Newtons Per Square Meter (8×10 4 psi) and 149C(300F)” ASLE Trans. 18 4 1975 249 262
- Cheng H. S. “A Numerical Solution of the EHD Film Thickness in an Elliptical Contact” Trans. ASME, J. Lub. Tech 92F 1 1970 155 162
- Dowson D. Saman W. Y. Toyoda S. “A Study of Stared EHD Line Contacts” Paper presented at the 5th Leeds-Lyon Symp. on Tribology Sept. 1978
- Murch L. E. Wilson W. R. D. “A Thermal EHD Inlet Zone Analysis” Trans. ASME, J. Lub. Techn. 97F 2 1975 212 216
- Jackson A. “A Simple Method for Determining Thermal EHL Correction Factors for Rolling Element Bearings and Gears” ASLE Paper 79-LC-1A-2, Presented at the ASME/ASLE Joint Lubrication Conf. Oct. 16–18 1979
- Hicks R. J. “Choice of Tooth Type for High Speed Gearing” Proc. Inst. Mech. Engrs. 184 1969 70 105 110
- Buckingham E. “Analytical Mechanics of Gears” McGraw-Hill New York 1949 324 420