This content is not included in your SAE MOBILUS subscription, or you are not logged in.
An Experimental Study of Diesel Engine Cylinder-Averaged NOx Histories
ISSN: 0148-7191, e-ISSN: 2688-3627
Published February 01, 1978 by SAE International in United States
Annotation ability available
A method of rapidly removing and quenching more than 75% of the cylinder content of a running diesel engine has been developed and tested. The resulting data give total nitric oxide in the cylinder versus crankangle. The data show that nitric oxide forms rapidly reaching a peak value in 20° CA or less. For higher loads and advanced timing the concentration overshoots the exhaust value by 14% before decreasing to the exhaust value. A few comparisons are made between the data and four existent models.
CitationVoiculescu, I. and Borman, G., "An Experimental Study of Diesel Engine Cylinder-Averaged NOx Histories," SAE Technical Paper 780228, 1978, https://doi.org/10.4271/780228.
- Scott W. M. “Looking in on Diesel Combustion.” SAE Trans. 78 Paper 690002 1969
- Newhall H. K. Starkman E. S. “Direct Spectroscopic Determination of Nitric Oxide in Reciprocating Engine Cylinders.” SAE Trans. 76 Paper 670122 1967
- Trolinger J. D. Bentley H. T. Lennert A. E. Sowls R. E. “Application of Electro Optical Techniques in Diesel Engine Research.” SAE Paper 740125 1974
- Bennethum J. E. Mattavi J. N. Toepel R. K. “Diesel Combustion Chamber Sampling-Hardware, Procedures and Data Interpretation.” SAE Trans. 84 Paper 750849 1975
- Carver G. P. Heap M. P. McComis C. Tyson T. J. “Investigation of Diesel Combustion by Direct In-Cylinder Sampling.” SAE Paper 750850 1975
- Nightingale D. R. “A Fundamental Investigation into the Problem of NO Formation in Diesel Engines.” SAE Trans. 84 Paper 750848 1975
- Rhee K. T. “Time-and Space-resolved Species Determination in Diesel Combustion Using Continuous Flow Gas Sampling.” Dept. of Mech. Engr., University of Wisconsin-Madison 1977
- Roblee, L. S. Jr. “A Technique for Sampling Reaction Intermediates in a Rapid Compression Machine.” Combustion and Flame 5 229 234 1961
- Moreau R. A. Sorenson S. C. Hull W. L. “A Technique for Time Resolved Nitric Oxide Measurement in Auto-igniting Mixtures.” Combustion and Flame 25 197 205 1975
- Voiculescu I. A. “An Experimental Determination of the History of Formation of the Cylinder Averaged Oxides of Nitrogen in Diesel Combustion.” Dept. of Mech. Engr., University of Wisconsin-Madison 1977
- Chiu W. S. Shahed S. M. Lyn W. T. “A Transient Spray Mixing Model for Diesel Combustion.” SAE Trans. 85 Paper 760128 1976
- Kau C. J. Tyson T. J. Heap M. P. “The Prediction of Pollution Formation in Diesel Engines.” Final Report Phase II and III, APRAC Project CAPE 20-17 Ultrasystems Inc. 1975
- Foster D. U. W. Senior Design Project Mech. Engr. 349 University of Wisconsin-Madison 1973
- Schneider M. A. “Accommodation of Gas Sampling Mechanisms on an Engine Head.” Dept. of Mech. Engr., University of Wisconsin-Madison 1974
- Baranescu R. Manole A. Private Communication Bucharest Polytechnic Institute Bucharest, Romania 1976
- Olikara C. Borman G. L. “A Computer Program for Calculation of Properties of Equilibrium Combustion Products With Some Applications to I.C. Engines.” SAE Paper 750486
- Bastress E. K. Cheng K. M. Dix D. M. “Models of Combustion and Nitrogen Oxide Formation in Direct and Indirect Injection Compression Ignition Engines.” Paper No. 719053 IECEC Meeting Boston, Mass. 1971
- Khan I. M. Greeves G. Wang C. H. T. “Factors Affecting Smoke and Gaseous Emissions From Direct Injection Engines and a Method of Calculation.” SAE Paper 730169
- Shahed S. M. Chiu W. S. Lyn W. T. “A Mathematical Model of Diesel Combustion.” Institution of Mech. Engrs. Conference on “Combustion in Engines” Cranfield Institute of Technology Great Britain 1975
- Hiroyasu H. Kadota T. “Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Engines.” SAE Paper 760129 1976 SAE Trans.
- Whitehouse N. D. Baluswamy N. “Calculation of Gaseous Products During Combustion in a Diesel Engine Using a Four Zone Model.” SAE Paper 770410
- Murayama T. Miyamoto N. Sasaki Kojima “The Relation Between Nitric Oxide Formation and Combustion Process in Diesel Engines.” 12th CIMAC Congress Paper B12 Tokyo 1977