This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Investigation of Stresses in the Inelastic Range in a Rolling Contact
Annotation ability available
Sector:
Language:
English
Abstract
An automobile component moving in a rolling contact is modeled as a disk rolling on a rigid track. Elastic-plastic finite element method is employed to determine the stresses and strains in the disk near the point of contact as a function of the rolling history. It is shown that unloading due to rotation of the previously yielded elements can be easily handled by the direct stiffness tangent modulus approach. Stresses at shakedown and elastic-plastic steady state are computed.
Authors
Citation
Anand, S., "Numerical Investigation of Stresses in the Inelastic Range in a Rolling Contact," SAE Technical Paper 770601, 1977, https://doi.org/10.4271/770601.Also In
References
- Evensen D. A. Kaplan A. “Some Problems of Wheel/Rail Interaction Associated with High-Speed Trains,” Int. Rly. Cong. Assoc., Monthly Bulletin 46 9 Sept. 1969 513 542
- Kilb E. “Axel Load and Wheel Diameter Considered from the Aspect of Stresses Acting on the Material of Wheel and Rail,” Int. Rly. Cong. Assoc. Monthly Bulletin 44 10 Oct. 1967 663 668
- Karas F. “Der Ort Groesster Beanspruchung in Waelzverbindungen mit Verschiedenen Druckfiguren,” Forschung auf dem Gebiet des Ingenieurwesens V.D.I. Verlag, Berlin 12 5 1947
- Hertz H. “On the Contact of Elastic Solids,” Journal Reine u. Angew. Math. 92 1881 156
- Timoshenko S. Goodier J. N. “Theory of Elasticity,” McGraw-Hill New York 2nd 1951 372 382
- Shaw M. C. Macks E. F. “Analysis and Lubrication of Bearings,” McGraw-Hill New York 1949
- Goodelle R. A. Derner W. J. Root L. E. “A Practical Method for Determining Contact Stresses in Elastically Loaded Line Contacts,” American Society of Lubrication Engineers Transactions B. 4 Oct. 1970 269 277
- Hodge, P. G. Jr. Garg V. K. Anand S. C. “A Finite Element Model for Plasticity Problems,” Developments in Theoretical and Applied Mechanics 7 Proceedings, Seventh Southeastern Conference on Theoretical and Applied Mechanics Heller M. Chi M. The Catholic University of America Washington, D. C. 1974 369 383
- Anand S. C. Garg V. K. “Shake-down of a Rolling Wheel Under Hub Loading,” Journal of the Engineering Mechanics Division ASCE 100 EM6 December 1974 1237 1251
- Yamada Y. Yoshimura N. Sakurai T. “Plastic Stress-Strain Matrix and its Application for the Solution of Elastic-Plastic Problems by the Finite Element Method,” International Journal of Mechanical Sciences 10 1968 343 354
- Zienkiewicz O. C. “The Finite Element Method in Engineering Science,” McGraw-Hill London 1971
- Hill R. “The Mathematical Theory of Plasticity,” Oxford University Press New York 1950