This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Engine Oil Viscosity Classifications-Past,Present,and Future
Annotation ability available
Sector:
Language:
English
Abstract
An extensive effort is under way to revise the SAE Engine Oil Viscosity Classification System to reflect user needs more realistically. To understand how the present system evolved, the history of the classification is traced, from the original version first published in 1911 to the present 1976 version. Reasons for both high- and low-temperature viscosity grades, multigrading, and footnotes to the viscosity table are discussed, as well as other classification systems which have been discarded over the years.
A critical assessment of the present classification is made from opinions offered at an SAE Open Forum last year. It is pointed out that the system has become quite complicated with four low-temperature and four high-temperature grades, five footnotes, and an appendix. Moreover, the high-temperature viscosity grades are based on an unrealistically low temperature of 98.9°C (210°F) and an unrealistically low-shear (kinematic) viscosity compared with engine operating conditions.
Several suggestions for improving the system are offered, although no one particular approach is advocated. It is concluded that to adequately reflect the effects of oil viscosity on engine performance in the field, the classification system must be revised to include a measure of low-temperature oil fluidity and a high-temperature, high-shear measure of viscosity which correlates with engine performance - a measure which has not yet been developed.
Recommended Content
Authors
Citation
McMillan, M., "Engine Oil Viscosity Classifications-Past,Present,and Future," SAE Technical Paper 770373, 1977, https://doi.org/10.4271/770373.Also In
References
- Stambaugh R. L. Kopko R. J. “Behavior of Non-Newtonian Lubricants in High-Shear Rate Applications,” SAE Paper No. 730487 in SP-382, Viscometry and Its Application to Automotive Lubricants 1973
- Stambaugh R. L. Kopko R. J. “A Test Procedure for Evaluating Temporary-Shear Loss of Engine Lubricants,” SAE Paper No. 750379 Automotive Engineering Congress and Exposition Detroit, Michigan February 1975
- Neudorfl P. “The Effect of Polymers in Multigrade Lubricating Oils on Engine Wear,” SAE Paper No. 760269 Automotive Engineering Congress and Exposition Detroit, Michigan February 1976