This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evaluation of Meeting Beams of Two- and Three-Beam Headlighting Systems
Annotation ability available
Sector:
Language:
English
Abstract
The major objective of the study was to provide another indication of the validity of a computer simulation model for predicting visibility with headlight beams. A comparison was made of simulation results with those obtained in a field test of five beams for targets positioned at the right and left side of the lane. The agreement obtained was generally good throughout the meeting. The discrepancy between simulation and field test results was greatest for the visibility of targets at the right side of the lane when the vehicles were close to the meeting point. This error was explained as due to the differences in the field test visibility distances used as the comparison data compared to the results of the field studies that were done to provide initial validation of the model. The maximum extent of this error was about 20%. The results show that the model predicts within the error of the field test procedures.
While there were no differences between the low beams or the mid beams for visibility of targets at the left of the lane, increases in visibility of up to 30% were attained with mid beams compared to the U.S. or E.C.E. low beams for visibility of targets at the right edge of the lane. An improved headlighting meeting beam configuration was suggested consisting of the E.C.E. low beams, for urban driving, and adding a lamp similar to the Type III lamp to form a mid beam for use as a meeting beam on rural roads.
Authors
Citation
Mortimer, R. and Olson, P., "Evaluation of Meeting Beams of Two- and Three-Beam Headlighting Systems," SAE Technical Paper 770237, 1977, https://doi.org/10.4271/770237.Also In
References
- Mortimer R.G. Olson P.L. “Developand Use of Driving Tests to Evaluate Headlamp Beams.” Motor Vehicle Manufacturers Association, Inc., Highway Safety Research Institute, University of Michigan March 1974
- Mortimer R.G. Becker J.M. “Computer Simulation to Predict Night Driving Visibility as a Function of Headlamp Beams.” Proceedings of the First International Conference on Driver Behavior International Driver Behavior Research Association Zurich October 1973
- Dodge Public Relations brochure: “Super-Lite,” 1969
- Oyler R.W. “Future Considerations in Automotive Lighting Design.” S.A.E. Paper 740616 August 1974
- Hull R.W. Hemion R.H. Cadena D.G. Dial B.C. “Vehicle Forward Lighting Performance and Inspection Requirements.” Southwest Research Institute 1971
- Mortimer R.G. Olson P.L. “Evolution of a U.S.-E.C.E. Improved Headlamp Beam.” Proceedings of the 6th International Ergonomics Association Congress 294 298 July 1975
- Roper V.J. Meese G.W. “More Light on the Headlighting Problem.” Highway Research Record No. 70 29 34 1963
- Mortimer R.G. Becker J.M. “Computer Simulation Evaluation of Current U.S. and European Headlamp Meeting Beams and a Proposed Mid Beam.” S.A.E. Paper 740311 February 1974
- Miller N.D. Baumgardner D. Mortimer R.G. “An Evaluation of Glare Nighttime Driving caused by Headlights Reflected from Rearview Mirrors.” S.A.E. Paper 740962 October 1974
- Mortimer R.G. “Some Effects of Road, Truck and Headlamp Characteristics on Visibility and Glare in Night Driving.” S.A.E. Paper 740615 August 1974
- Mortimer R.G. Becker J.M. “Some Operational Considerations Affecting the Performance of Current and Proposed Headlamp Beams.” Transportation Research Record No. 502 34 40 1974