This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Rejuvenation of Lead-Poisoned Noble Metal Catalysts
Annotation ability available
Sector:
Language:
English
Abstract
The acetic acid-ammonium acetate methods of catalyst rejuvenation by lead removal have been of considerable interest. The effectiveness of these methods was therefore investigated in the laboratory as a function of temperature, duration of treatment, type of agitation, and cation, using mainly catalyst samples poisoned by treatment with a lead acetate solution, with confirmation by vehicle-aged catalyst samples. The results have, in general, been encouraging. For instance, washing of poisoned catalyst samples with 10 wt % acetic acid solution at room temperature for half an hour was sufficient to improve the hydrocarbon conversion of a catalyst poisoned with 5 wt % Pb (typical of a catalyst aged for about 50,000 miles with fuel containing 0.03 g Pb/gl) by 15%. However, we found that such a rejuvenated catalyst, if subjected to a laboratory repoisoning test with 0.03 g Pb/gl fuel, loses hydrocarbon activity rapidly. The rate of activity loss upon repoisoning appears to be about 6 times faster than the average loss rate experienced before the rejuvenation treatment. On the other hand, a poisoned catalyst sample which was rejuvenated by a more drastic treatment (e.g. two treatments for 3 hrs each, at 195°F with ultrasonic agitation), appeared to have the same rate of activity loss upon further aging as a fresh catalyst after the initial aging. This study also showed that there is no significant difference in rejuvenation effectiveness among acetic acid or ammonium acetate at the same concentration.
Authors
Citation
Rothschild, W., "Rejuvenation of Lead-Poisoned Noble Metal Catalysts," SAE Technical Paper 760321, 1976, https://doi.org/10.4271/760321.Also In
References
- Kummer J. T. Yao Y. McKee D. “Honeycomb Auto Exhaust Catalysts Containing Copper Chromite and Palladium,” Automotive Engineering Congress Feb. 1976 Detroit, Michigan
- Otto K. Dalla Betta R. A. Yao H. C. “A Laboratory Method for the Simulation of Automobile Exhaust and Studies of Catalyst Poisoning,” J. Air Poll. Contr. Assn. 24 596 1974
- Shelef M. Dalla Betta R. A. Larson J. A. Otto K. Yao H. C. “Poisoning of Monolithic Noble Metal Oxidation Catalysts in Automobile Exhaust Environment,” 74th Natl. Meet. AIChE New Orleans March 1973
- Artz B. E. “X-Ray Fluorescence Analysis of Catalytic Converters Using Element Standards and Theoretical Corrections for Interelement Effects,”
- Burns E. A. Hume D. N. “Acetato Complexes of Lead in Aqueous Solution,” J. Amer. Chem. Soc. 78 3958 1956