This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Trends in High Temperature Materials Technology for Advanced Aircraft Turbine Engines
Annotation ability available
Sector:
Language:
English
Abstract
Approaches to the development of improved high temperature engine materials are reviewed. Emphasis is placed on emerging materials technologies and their potential benefits to aircraft gas turbine engines. Advances in materials processing technology are considered also, with emphasis on areas of potential cost reduction.
This review also examines a changing approach to the selection of turbine engine materials technologies for future development. This changing approach places greater emphasis on the overall economic benefits to the aircraft system rather than improved engine performance.
Recommended Content
Technical Paper | High Temperature Turbine Design Considerations |
Technical Paper | Changing the Utility Subsystem Paradigm |
Authors
Topic
Citation
Blankenship, C., "Trends in High Temperature Materials Technology for Advanced Aircraft Turbine Engines," SAE Technical Paper 751050, 1975, https://doi.org/10.4271/751050.Also In
References
- Semmel, J. W. Jr. “Opportunities in Materials and Processes for Aircraft/Ship Propulsion Gas Turbines.” Materials on the Move, SAMPE National Technical Conference 6 October 1974
- Semmel, J. W. Jr. Alan Hanser H. “Opportunities in Materials and Processes for Aircraft/Ship Propulsion Gas Turbines.” Materials on the Move, SAMPE National Technical Conference 6 October 1974 “Materials and Processing Technology for Advanced Gas Turbines.”
- Gray H. R. “Turbine Materials and Life Prediction.” Aeronautical Propulsion Conference NASA-Lewis Research Center May 1975 NASA SP381
- Simmons W. F. “Current and Future Materials Usage in Aircraft Gas Turbine Engines.” Metals and Ceramics Information Center Report MCIC-73-14 June 1973
- Salee G. P. “Economic Effects of Propulsion System Technology on Existing and Future Transport Aircraft.” NASA CR-134645 July 1974
- Bisset J. W. “Cost/Benefit Study of Advanced Materials Technologies for Aircraft Turbine Engines.” NASA CR-134701 October 1974
- Ross E. W. Johnson R. P. Neitzel R. E. “Cost Benefit Study of Advanced Materials Technology for Aircraft Turbine Engines.” NASA CR-134702 November 1974
- Steinhagen C. A. Stotler O. L. Neitzel R. E. “Study of Costs and Benefits of Composite Materials in Advanced Turbofan Engines.” NASA CR-134696 October 1974
- Dunn R. G. Sponseller D. L. Dahl J. M. “Ductility Improvements in Superalloys.” Proceedings from Symposium on “Towards Improved Ductility and Toughness,” Koyto, Japan October 1971
- Gell M. Donachie M. J. “Directionally Solidified Eutectics for Use in Advanced Gas Turbine Engines.” Materials on the Move, SAMPE National Technical Conference 6 October 1974
- Ashbrook R. L. “Directionally Solidified Composite Systems under Evaluation.” NASA TM X-71514 April 1974
- Signorelli R. A. “Metal Matrix Composites for Aircraft Propulsion Systems.” NASA TM X-71685 April 1975
- NASA Contract NAS3-17811 “Alloy and Structural Optimization of a Directionally-Solidified Lamellar Eutectic Alloy.” Pratt and Whitney Aircraft
- Jackson M. R. Rairden J. R. Hampton L. V. “Coatings for Directional Eutectics.” NASA CR-134665 January 1974
- Feiten E. J. Strangman T. E. Ulion N. E. “Coatings for Directional Eutectics.” NASA CR-134735 October 1974
- Hurley G. F. “Directionally Solidified Lamellar Eutectic Superalloys by Edge-Defined, Film-Fed Growth.” NASA CR-134808 April 1975
- Brentnall W. D. Toth I. J. “Fabrication of Tungsten Wire Reinforced Nickel-Base Alloy Composites.” NASA CR-134664 October 1974
- Weeton J. W. “Fiber Reinforced Superalloys, Ceramics, and Refractory Metals and Directionally Solidified Eutectics (Heat-Resistant Composites).” Composites: State-of-the-Art, TMS/AIME 1974
- Clark L. P. “Powder Metallurgy Production Processes.” Advanced Manufacturing Methods and Their Economic Implications: Some Pilot Papers on Powder Metallurgy and Joining.” AGARD Report No. 627 March 1975
- Superalloys-Processing (Proceedings of the Second International Conference). Metals and Ceramics Information Center Report MCIC-72-10 September 1972
- Klingler L. J. Weinberger W. R. Bailey P. G. Baranow S. “Development of Dispersion Strengthened Ni-Cr Alloy Sheet for Space Shuttle Vehicles.” NASA CR-121164 December 1972
- Bailey P. G. “Oxide Dispersion Strengthened Alloys for Aircraft Turbine Engine Vanes.” Materials on the Move, SAMPE National Technical Conference 6 October 1974
- Martin Marietta Company “MAR-M Alloy 509 February 1969
- NASA Contract NAS3-18915 “Manufacture and Engine Test of Advanced ODS Alloy Turbine Vanes.” General Electric Company
- Benjamin J. S. “Dispersion Strengthened Superalloys by Mechanical Alloying.” Metallurgical Transactions 1 October 1970
- NASA Contract NAS3-19710 “Low Cost Fabrication of ODS Alloy Vanes.” General Electric Company
- Sanders W. A. Probst H. B. “High Gas Velocity Burner Tests on Silicon Carbide and Silicon Nitride.” Ceramics for High Performance Applications (Proceedings of the Second Army Materials Technology Conference) Brookhill Publishing Company 1974
- Sanders W. A. Probst H. B. Van Reuth E. C. “High Gas Velocity Burner Tests on Silicon Carbide and Silicon Nitride.” Ceramics for High Performance Applications (Proceedings of the Second Army Materials Technology Conference) Brookhill Publishing Company 1974 “The Advanced Research Projects Agency's Gas Turbine Program.”
- Burke J. J. Gorum A. E. Katz R. N. “Ceramics for High Performance Applications.” Proceedings of the Second Army Materials Technology Conference Brookhill Publishing Company 1974
- Brines G. L. “Studies for Determining the Optimum Propulsion System Characteristics for Use in a Long Range Transport Aircraft.” NASA CR-120950 July 1972
- General Electric Company “Propulsion System Studies for an Advanced High Subsonic, Long Range Jet Commercial Transport Aircraft.” NASA CR-121016 November 1972
- Ciepluch C. C. “QCSEE Program.” Aeronautical Propulsion Conference NASA-Lewis Research Center May 1975 NASA SP-381