This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Wind Tunnel Development of the Dragfoiler - A System for Reducing Tractor-Trailer Aerodynamic Drag
Annotation ability available
Sector:
Event:
National West Coast Meeting
Language:
English
Abstract
Dragfoiler II, an effective and practical add-on aerodynamic drag reducing system for tractor-trailers, has been developed. Wind tunnel tests with 1/16- and 1/7-scale tractor-trailer models were used to determine empirical design guidelines for the Dragfoiler II's side elevation and planform shapes. Optimum designs for various combinations of tractor roof height and length, trailer height, and tractor-to-trailer gap length gave zero-yaw drag reductions between 30 and 35%. At a yaw angle of 10°, the percentage drag reductions were about half those at 0°. Off-design performance and the effects of trailer side-edge geometry were investigated. Several full-scale Dragfoiler II's are currently undergoing proving ground and commercial fleet evaluation tests.
Recommended Content
| Technical Paper | Comparison of On-Road and Wind-Tunnel Tests for Tractor-Trailer Aerodynamic Devices, and Fuel Savings Predictions |
| Technical Paper | Aerodynamic Test Techniques |
| Ground Vehicle Standard | Truck and Bus Aerodynamic Device and Concept Terminology |
Authors
Citation
Mason, W., "Wind Tunnel Development of the Dragfoiler - A System for Reducing Tractor-Trailer Aerodynamic Drag," SAE Technical Paper 750705, 1975, https://doi.org/10.4271/750705.Also In
References
- Flynn H.O. Kyropoulos P. “Truck Aerodynamics.” SAE Transactions 70 Paper 284A 1962
- Sherwood A.W. “Wind Tunnel Test of Trailmobile Trailers.” University of Maryland Wind Tunnel Report No. 85 June 1953
- Windsor R.I. “Wind Tunnel Test of Trailmobile Trailers, Second Series.” University of Maryland Wind Tunnel Report No. 98 October 1953
- Gross D.S. “Wind Tunnel Tests of Trailmobile Trailers, Third Series.” University of Maryland Wind Tunnel Report No. 150 April 1955
- White R.A. Korst H.H. “The Determination of Vehicle Drag Contributions from Coast-Down Tests.” Paper 720099 SAE Automotive Engineering Congress Detroit January 1972
- White R.A. Korst H.H. “A Generalized Method for Determining Drag Coefficient from Coast Down Tests.” “Advances in Road Vehicle Aerodynamics 1973,” BHRA Fluid Engineering 1973 15 23
- Mason, W.T. Jr. Sovran G. “Ground-Plane Effects on the Aerodynamic Characteristics of Automobile Models -- An Examination of Wind Tunnel Test Technique.” “Advances in Road Vehicle Aerodynamics 1973,” BHRA Fluid Engineering 1973 291 309
- Mason, W.T. Jr. Beebe P.S. Schenkel F.K. “An Aerodynamic Test Facility for Scale-Model Automobiles.” Paper 730238 SAE International Automotive Engineering Congress Detroit January 1973
- Lissaman P.B.S. “Reduction of the Aerodynamic Drag of Trucks.” Proceedings of the NSF/DOT Conference/Workshop Pasadena October 1974