This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Digital Data Aquisition with Emphasis on Measuring Pressure Synchronously wih Crank Angle
Annotation ability available
Sector:
Language:
English
Abstract
A general purpose data acquisition system has been developed which converts analog data to scaled, tabulated, and graphical output. A scanning synchronization unit ensures that each input channel is sampled synchronously with input data pulses. System input can be either direct from the test area or from an analog tape recorder, in which case time expansion is possible by the use of high record-low play/back speeds.
A computer program controls the analog to digital conversion process. The on-line control of the program minimizes the subsequent data reduction, and through the use of input parameters, flexibility is attained in data formatting. The data reduction error is less than 1% and statistical programs included in the system provide estimates of the quality of the input data. The entire system including all associated hardware and software is described in detail, using acquisition of pressure data synchronously with crank angle as an example.
Recommended Content
Authors
Citation
Fisher, R. and Macey, J., "Digital Data Aquisition with Emphasis on Measuring Pressure Synchronously wih Crank Angle," SAE Technical Paper 750028, 1975, https://doi.org/10.4271/750028.Also In
References
- Spain R. F. Kimm G. Y. Fisher R. V. “Central Data Collection and Processing with Emphasis on Emissions Data Reduction.” SAE 700172
- Bockemuehl R. R. Weller E. F. “An Instrument for Recording Cylinder Pressure Versus the Crank Angle of an Internal Combustion Engine.” SAE Preprint 683 SAE Annual Meeting January 9-13 1956
- Lancaster D. R. Krieger R. B. Lienesch J. H. “Measurement and Analysis of Engine Pressure Data.” 1975 SAE Automotive Engineering Congress February 24-28 1975
- Brown W. L. “Methods for Evaluating Requirements and Errors in Cylinder Pressure Measurement.” SAE 670008
- Brown W. L. “The Caterpillar imep Meter and Engine Friction.” SAE 730150
- Schierloh F. L. Chaney R. D. Green S. J. “An Application of Acquisition and Reduction of Data of Variable Short-Time Tests.” Experimental Mechanics 10 6 1970
- LeFeuvre T. Meyers P. S. Uyehara O. A. Shipinski J. H. “A Tape Recording and Computer Processing System for Instantaneous Engine Data.” SAE 680133
- Rowe G. L. “A Self Synchronous High Speed Data Acquisition System Applied to Pressure-Time Profiles.” International Symposium of Automated Engine Testing Queen Mary College, University of London London, England September 28 1972
- Benson R. S. Pick R. “Recent Advances in Internal Combustion Engine Instrumentation with Particular Reference to High Speed Acquisition and Automated Test Bed.” SAE 740695
- “Statistics for the Engineer.” SAE SP-250 December 1963
- Duncan H. J. “Quality Control and Industrial Statistics.” R. D. Irving Inc.
- Eisenhart C. “Realistic Evaluation of the Precision and Accuracy of Instrument Calibration Systems.” Proceedings of the 1962 Standards Laboratory Conference, NBS 1962 Journal of Research, NBS 67C (Engineering and Instrumentation) 2 April-June 1963 161 187
- Peters B. D. Borman G. L. “Cyclic Variations and Average Burning Rates in a S.I. Engine.” SAE 700064
- Barton R. K. Kenemuth D. K. Lestz S. S. Meyer W. E. “Cycle by Cycle Variations of a Spark Ignition Engine-A Statistical Analysis.” SAE 700488
- Matsuoka S. Yamaguchi T. Umemura Y. “Factors Influencing the Cyclic Variation of Combustion of Spark Ignition Engine.” SAE 710586