This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Proposed Technical Report on Fatigue Properties for the SAE Handbook
Annotation ability available
Sector:
Language:
English
Abstract
A new section on fatigue properties of metals is currently being written under the guidance of the SAE Fatigue Design and Evaluation Committee. This paper presents a preliminary copy of the proposed section which includes an introduction, a table of monotonic stress-strain properties, a table of cyclic stress-strain and fatigue properties, definitions of properties, and an example application. The main purpose of the paper is to provide engineers with the available data at the earliest possible time. The final version of the report will be published in the SAE Handbook.
Recommended Content
Authors
Topic
Citation
Tucker, L., Landgraf, R., and Brose, W., "Proposed Technical Report on Fatigue Properties for the SAE Handbook," SAE Technical Paper 740279, 1974, https://doi.org/10.4271/740279.Also In
References
- Graham J. A. “Fatigue Design Handbook.” New York Society of Automotive Engineers, Inc. 1968
- Bridgeman P. W. Transactions of American Society for Metals 32 1944 553 Dieter G. E. “Mechanical Metallurgy.” New York McGraw-Hill Book Co., Inc. 1961 250 254
- Raske D. T. Morrow JoDean “Mechanics of Materials in Low Cycle Fatigue Testing.” “Manual on Low Cycle Fatigue Testing.” Philadelphia American Society for Testing and Materials 1969 1 25
- Landgraf R. W. Morrow JoDean Endo T. “Determination of the Cyclic Stress-Strain Curve.” ASTM Jrl. of Materials 4 1 March 1969 176 188
- Gallagher J. P. “What the Designer Should Know About Fracture Mechanics Fundamentals.” SAE Transactions 80 1971 paper 710151
- Sinclair G. M. “What the Designer Should Know About Fracture Mechanics Testing.” SAE Transactions 80 1971 paper 710152
- Ripling E. J. “How Fracture Mechanics Can Help the Designer.” SAE Transactions 80 1971 paper 710153
- Campbell J. E. Berry W. E. Fedderson C. E. “Damage Tolerant Design Handbook.” Metal and Ceramics Information Center, Battelle Columbus Laboratories Columbus, Ohio 1973
- Jaske C. E. Fedderson C. E. Davies K. B. Rice R. C. “Analysis of Fatigue, Fatigue Crack Propagation and Fracture Data.” Battelle Columbus Laboratories Columbus, Ohio November 1973
- Moore T. D. “Structural Alloys Handbook.” Mechanical Properties Data Center, BelFour Stulen, Inc. Traverse City, Michigan 1973
- Wolf J. Brown, W. F. Jr. “Aerospace Structural Metals Handbook.” 1-4 Mechanical Properties Data Center, BelFour Stulen, Inc. Traverse City, Michigan 1973
- Raske D. T. “Review of Methods for Relating the Fatigue Notch Factor to the Theoretical Stress Concentration Factor.” Simulation of the Fatigue Behavior of the Notch Root in Spectrum Loaded Notched Members Dept. of Theoretical and Applied Mechanics, University of Illinois Urbana January 1970
- Topper T. H. Wetzel R. M. Morrow JoDean “Neuber's Rule Applied to Fatigue of Notched Specimens.” ASTM Jrl. of Materials 4 1 March 1969 200 209
- Tucker Lee E. “A Procedure for Designing Against Fatigue Failure of Notched Parts.” SAE Transactions 81 1972 paper 720265
- Dowling N. E. “Fatigue Failure Predictions for Complicated Stress-Strain Histories.” ASTM Jrl. of Materials March 1972 “Fatigue Failure Predictions far Complicated Stress-Strain Histories.” Dept. of Theoretical and Applied Mechanics, University of Illinois Urbana 1970
- Morrow JoDean “Cyclic Plastic Strain Energy and Fatigue of Metals.” “Internal Friction, Damping, and Cyclic Plasticity.” Philadelphia American Society for Testing and Materials 1965 45 87
- Sandor B. I. “Fundamentals of Cyclic Stress and Strain.” Madison, Wisc. University of Wisconsin Press 1972