This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Data Acquisition System for Diesel Engine Testing
Annotation ability available
Sector:
Language:
English
Abstract
An analytical approach has been taken to the development of a data acquisition system for diesel engine testing. This approach led to a well-defined and comprehensive system design. Broad concepts were refined in a nonrestrictive manner to specific goals and tasks, enabling the system proposal to accurately represent the engine testing requirements.
Authors
Citation
Williams, H., Harper, P., and Kasinoff, H., "Data Acquisition System for Diesel Engine Testing," SAE Technical Paper 710819, 1971, https://doi.org/10.4271/710819.Also In
References
- Shepler, Paul R. Weinberger, Carl S. “Factorial Testing of Diesel Engine Piston Rings” Paper No. 670934
- Shepler, Paul R. Weinberger, Carl S. “Part Power Parameters Affecting Lube Oil Consumption and Blowby in Small Bore, High Speed Diesels” Paper No. 690752 SAE National Powerplant Meeting Cleveland, Ohio October 27 29 1969
- Rosove, Perry E. “Developing Computer-Based Information Systems“ New York, N.Y. John Wiley and Sons, Inc. 1967
- Norton, Harry M. “Handbook of Transducers for Electronic Control Systems” Englewood Cliffs, N.J. Prentice-Hall 1969
- Instrument Society of America “ISA Transducer Compendium - Second Edition - Part 1” New York, N.Y. Plenum Publishing Corp. 1970
- Instrument Society of America “ISA Transducer Compendium - Second Edition - Part 2” New York, N.Y. Plenum Publishing Corp. 1970
- Instruments and Control Systems Staff “Review of Electronic Load Cells” Instruments and Control Systems December 1970 83 86
- American National Standards Institute “Temperature Measurement Thermocouples - ANSI Standard C96. 1-1964“ New York, N.Y. American National Standards Institute 1964
- American Society for Testing and Materials “Manual on the Use of Thermocouples in Temperature Measurement” Philadelphia, Pa. ASTM Special Publication 470
- Pogach, Barry “Transducer Conditioning - 1967” Instrument Society of America
- Frank, Eugene “Transducer Conditioning - 1967” SESA Spring Meeting, Denver, Colorado May 5 7 1965
- Renschler, Edward L. “Analog-to-Digital Conversion, Part One” Instruments and Control Systems May 1970 89 91
- Renschler, Edward L. “Analog-to-Digital Conversion, Part Two: Conversion Techniques” Instruments and Control Systems June 1970 131 135
- Allen, D. P. “How to Choose Data Acquisition Systems” Control Engineering Nov 1969 102 16
- Beckwith, T.G. Buck, N. Lewis “Mechanical Measurements” Reading Mass. Addison-Wesley Publishing Co. Inc. 1969
- Budzilovich, P. N. “Electrical Noise: Its Nature, Causes, Solutions” Control Engineering May 1969 74 78
- Buntenbach, R.W. “Ground Circuits” Instruments and Control Systems November 1969 135 137
- Cochran, William G. Cox, Gertrude M. “Experimental Design” 2nd New York, N.Y. Wiley 1966
- Cole, Michael H. Wise, Larry E. Henderson, John “Real Time Engine Test System” Instruments and Control Systems June 1968 95 99
- Digital Equipment Corp. “Introduction to Programming” Maynard, Mass. 1970
- Digital Equipment Corp. “Programming Languages” Maynard, Mass. 1970
- Instrument Society of America “Electrical Transducer Nomenclature and Terminology, ISA Standard - S37. 1-1969” Pittsburg, Pa. Instrument Society of America 1969
- Hicks, Charles R. “Fundamental Concepts In The Design of Experiments” New York, N.Y. Holt, Rinehart and Winston 1965
- Klipec, B. “Controlling Noise in Instrument Circuits” Control Engineering March 1968 75 76
- Lawrence, Arthur F. “Basic Data Acquisition Systems Considerations for Static Testing” Society for Experimental Stress Analysis, Technical Committee on Strain Gages San Francisco, California October 28 1968
- Lion, Kurt S. “Instrumentation In Scientific Research” New York, N.Y. McGraw-Hill 1959
- Measurements and Data Staff “Strain-Gage Pressure Transducers” Measurements and Data May June 1971 80 88
- Moroney, M.J. “Facts from Figures” Harmonsworth, Middlesex, England Pelican Books 1951
- Morris, J.J. “What to Expect When You Scale Down to a Minicomputer” Control Engineering September 1970 65 71
- Morrison, Ralph “Grounding and Shielding Techniques in Instrumentation” New York, N.Y. John Wiley and Sons, Inc. 1967
- Nalle, David H. “Signal Conditioning” Instruments and Control Systems February 1969 77 82
- Natrella, Mary G. “Experimental Statistics, NBS Handbook 91” Washington, D. C, U. S. Government Printing Office 1963
- Rexrode, L.O. “Noiseproof a Digital Electronic Control System” Control Engineering November 1968 66 71
- Shah, M. A. “The Computer in a Control System” Instruments and Control Systems March 1971 93 95
- Sippl, Charles J. “Computer Dictionary and Handbook” Indianapolis, Indiana Howard W. Sams & Co. 1967
- Smith, J. H. “Computers In Mechanical Testing” Instruments and Control Systems” June 1970 125 126
- Torpy, P. J. “Minicomputerizing Analog Data Collection” Control Engineering June 1970 69 74
- Wadman, Bruce W. “Computer Operated Engine Test Cell” Diesel and Gas Engine Turbine Progress May 1970
- Willard, Frank G. “Noise in Control Signals” Instruments and Control Systems September 1969 153 155