This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Dynamic Performance of Articulated Highway Vehicles - A Review of the State-of-the-Art
Annotation ability available
Sector:
Language:
English
Abstract
This paper reviews the state of theoretical and experimental technology relative to the dynamic performance of articulated highway vehicles. The review contains three major sections, corresponding to the traditional breakdown of vehicle performance: directional performance, braking performance, and combined directional and braking performance. An attempt is made to take a frankly evaluative point of view and to point out knowledge gaps and unanswered questions, in addition to documenting previous accomplishments and progress. The paper concludes with some recommendations for future research consistent with the findings of the review.
Recommended Content
Journal Article | Automated Driving Impediments |
Technical Paper | Driving Simulator Devices and Applications (A Paper in Two Parts) |
Authors
Topic
Citation
Dugoff, H. and Murphy, R., "The Dynamic Performance of Articulated Highway Vehicles - A Review of the State-of-the-Art," SAE Technical Paper 710223, 1971, https://doi.org/10.4271/710223.Also In
References
- Huber L. Dietz O. 81 16 1937 459 463
- Ziegler H. Ing.-Arch. 9 1938 96 108
- Ziegler H. Ing.-Arch. 9 1938 241 243
- Williams D. “The Mathematical Theory of the Snaking of Two-Wheeled Trailers.” Proc., Automobile Division Inst. Mech. Engrs. 1951-1952 175 187
- Slibar A. Paslay P. R. “The Forced Oscillations of Trailers.” ASME J. Appl. Mech. 24 1957 515 519
- Paslay P. R. Slibar A. “Susceptibility of the Motion of Towing Vehicles to Forces Arising from Trailers.” Oesterreicher Ingen.-Arch. 13 3 1959 175 187
- Segel L. “The Forced Lateral Oscillations of Trailers.” ASME J. Appl. Mech. 25 1958 308
- Dugoff H. Ehrlich I. R. “On the Lateral Stability of Articulated Highway Vehicles.” Davidson Laboratory 1968
- Hales F. D. “The Ride and Handling of Articulated Vehicles.” Commercial Vehicles: Engineering and Operation London Inst. Mech. Engrs. 1967 130 152
- Stevens H. Tignor S. C. Lojacono J. F. “Offtracking Calculation Charts for Trailer Combinations.” Highway Res. Rec. 159 1967 1 24
- Clark D. C. Segel L. “The Steering and Drawbar-Pull Performance of Pneumatic-Tired Vehicles.” Proc. Internatl. Conf. Mech. Soil-Vehicle Syst. 1961
- Jindra F. “Tractor and Semitrailer Handling.” Automobile Engineer October 1963 438 446
- Bundorf R. T. “Directional Control Dynamics of Automobile-Travel Trailer Combinations.” SAE Transactions 76 1968 paper 670099
- Hales F. D. “Lateral Stability Problems of Simply Articulated Vehicles.” Internatl. Union Theoret. Mech. Symposium 1965 17 34
- Jindra F. “Tractor and Trailer Handling.” Automobile Engineer February 1965 60 69
- Jindra F. “Handling Characteristics of Tractor-Trailer Combinations.” SAE Transactions 14 1966 paper 650720
- Goland M. Jindra F. “Directional Stability and Control of a Four-Wheeled Vehicle in a Flat Turn.” Paper 211A presented at SAE West Coast Meeting San Francisco August 1960
- Dugoff H. “On the Influence of Aerodynamic Forces and Moments on the Lateral Stability of Articulated Highway Vehicles.” Proc. First Internatl. Cong. Vehicle Mech. 1968
- Ellis J. R. “The Ride and Handling of Semitrailer Articulated Vehicles.” Automobile Engineer December 1966 523 529
- Schmid I. “Engineering Approach to Truck and Tractor Train Stability.” SAE Transactions 76 paper 670006
- Kullberg A. G. Nordstrom O. Magnusson G. Formgren C. “Studies of Braking Ability and Dynamic Stability during Braking of Passenger Cars with Caravan Trailers.” The National Road Research Institute Stockholm, Sweden 1967
- Uspensky J. V. “Theory of Equations.” New York McGraw-Hill, Inc. 1948
- Ellis J. R. “The Dynamics of Vehicles during Braking.” Symposium Control of Vehicles, Automobile Division London Inst. Mech. Engrs. 1963 20 29
- Nothstine J. R. Beauvais F. N. “Laboratory Determination of Tire Forces.” Paper 713B, presented at SAE International Summer Meeting Montreal June 1963
- Mikulcik E. C. “The Dynamics of Tractor-Semitrailer Vehicles: The Jackknifing Problem.” Cornell University Ithaca, N.Y. June 1968
- Hales F. D. Barter N. F. Slack I. Skinner M. “The Handling and Stability of Motor Vehicles, Pt. 3.” Motor Industry Research Assn. 1966
- Dugoff H. Parekh H. M. “Studies of Mobility and Stability Characteristics of a Truck Train.” Davidson Laboratory November 1967
- Oetzel J. G. “Synchronization of Brakes on Multi-Axle Truck-Trailer Trains.” SAE Quart. Trans. 6 2 April 1952
- Leuzzi V. “Braking of Road Vehicles with Tandem Axle Connected by an Equalizing Bar,” ATZ 59 3 March 1957 58 61
- Bode O. Görge W. “Mathematical Investigation of the Braking Performance of Articulated Vehicles.” 49 1961
- Morse R. J. “Brake Balance-It Can Be Improved.” SAE Paper 660398 presented at Mid-year Meeting Detroit June 1966
- Noon W. D. Smith G. L. Bochnig P. A. “Dynamic Brake Balance via the Computer.” SAE Transactions 75 1966 paper 660399
- Hykes P. G. “Truck Downhill Control-Prediction Procedure.” Paper 630A presented at SAE Automotive Engineering Congress Detroit January 1963
- North M. R. Oliver S. J. “Transient Load Transfer in an Articulated Vehicle under Braking Conditions.” M.I.R.A. Report 1967 7 June 1967
- Limpert Rudolf “An Investigation of the Brake Force Distribution of Tractor-Semitrailer Combinations.” Paper 710044 presented at SAE Automotive Engineering Congress Detroit January 1971
- Fritzsche G. ATZ 61 8 1959 218 224
- Fritzsche G. ATZ 63 1 1961
- Stump E. ATZ 64 7 1962
- Rouse J. A. “The Distribution of Braking on Motor Vehicles.” Proc. Symposium on Control of Vehicles during Braking and Cornering London Inst. Mech. Engrs. 1963
- Mitschke M. Runge D. “Load Controlled Brake Force in Semi-Trucks.” Bosch Tech. Berichte 1 3 June 1965
- Runge D. “Matching Trailer Braking to the Loading of the Truck/Trailer Combination.” ATZ 69 7 1967
- Bode O. Merz H. “Determination of the Most Suitable Brake Testing Procedures for Motor Vehicles and Trailers.” 87 1955
- Bode O. Merz H. “Brake Testing Equipment for Motor Vehicles and Trailers.” 89 1965
- Bode O. Görge W. “Braking Tests on Articulated Vehicles.” 150 1961
- Underhill A. E. “Progressive Braking System for Trailer Vehicles.” Hydraulic Pneumatic Power October 1967
- Guevara J. P. Clar “The Influence of Time-Lag in the Braking of Commercial Vehicles.” Paper 2-08 presented at 12th FISITA Congress May 1968
- Nelson R. E. Fitch J. W. “Optimum Braking, Stability, and Structural Integrity for Longer Truck Combination.” SAE Transactions 77 1968 paper 680547
- Sido F. “Analysis through Model Tests of the Lag Behavior of Pneumatic Systems.” ATZ 71 3 1969 95 100
- Kibbee Lewis C. “Report of Truck Brake Tests Conducted for the Virginia Twin Trailer Study Commission.” Virginia Highway Users Association March 1969
- “Report of the Twin Trailer Study Commission to the Governor and the General Assembly of Virginia.” Department of Purchase and Supply Richmond 1970
- Moller E. “Pneumatic Braking Systems on Tractor/Trailer Combinations.” ATZ 56 12 1954
- Bode O. “Tests to Determine Characteristics Value for Direct Brake Testing on Tractor/Trailer Combinations Equipped with Trailer Brakes Having Automatic Adjustment for Load.” 101 1951
- Bode O. ATZ 60 3 1958
- Mueller G. ATZ 62 7 1960
- Dewandre Clayton “Braking Proportional to Load Automobile Engineer November 1965
- Eaton W. C. Schreur I. J. “Brake Proportioning Valve.” Paper 660400 presented at SAE Mid-Year Meeting Detroit June 1966
- Koutny Z. “Small-Scale Test Installation for Research on the Stability of Road Vehicles during Braking . . . .” C.I.D.I.T.V.A. Bul. 27 September 1966
- Wilson A. J. “Brakes and Brake Systems.” Commercial Vehicles, Engineering and Operation London Inst. Mech. Engrs. 1967
- Newcomb T. P. Spurr R. T. “CV Braking: State of the Art.” Automotive Design Engineering 7 November 1968
- Lueck F. E. Gartland W. A. Denholm M. J. “Proportioning Valve to Skid Control-A Logical Progression.” Paper 690456 presented at SAE Mid-Year Meeting Chicago May 1969
- Denholm M. J. Lueck E. F. Bush J. A. “Make the Trucks Stop, Too.” Paper 700114 presented at SAE Automotive Engineering Congress Detroit January 1970
- Wilkins H. A. “An Assessment of the Dunlop Maxaret Anti-Locking Braking System Fitted to an Articulated Vehicle.” RRL Report LR 161 Road Research Laboratory Crawthorne, Berkshire, England 1968
- Haviland G. S. “Automatic Brake Control for Trucks-What Good is It?” SAE Transactions 77 1968 paper 680591
- Chinn B. P. Wilkins H. A. “An Assessment of the Dunlop Electronic Maxaret Anti-Locking Braking System Fitted to an Articulated Vehicle.” RRL Report LR 325 Road Research Laboratory, University of Transport Crawthorne, Berkshire, England 1970
- Latvala B. E. Morse R. J. “Adaptive Anti-Lock Braking a Reality for Air Braked Vehicles.” Paper 700112 presented at SAE Automotive Engineering Congress Detroit January 1970
- Yarber G. W. Airheart F. B. “Controlled Rotation of Braked Wheels.” Paper 700113 presented at SAE Automotive Engineering Congress Detroit January 1970
- Fancher, P. S. Jr. et al. “Experimental Studies of Tire Shear Force Mechanics-a Summary Report.” Final Report NBS Contract CST-928-5 HSRI July 1970
- Dugoff H. Fancher, P. S. Jr. Segel L. “An Analysis of Tire Traction Properties and Their Influence on Vehicle Dynamic Performance.” 1970 International Automobile Safety Conference Compendium, SAE 1970
- Leucht P. M. “The Directional Dynamics of the Commercial Tractor-Semitrailer Vehicle During Braking.” 1970 International Automobile Safety Conference Compendium, SAE 1970
- Wilkins H. A. “Assessment of the Hope Anti-Jackknifing Device.” RRL Report LR 163 Road Research Laboratory Crawthorne, Berkshire, England 1968
- Bidwell J. B. “State of the Art-Vehicle Control and Roadholding.” 1970 International Automobile Safety Conference Compendium, SAE 1970
- Dugoff H. Segel L. Ervin R. D. “Measurement of Vehicle Response in Severe Braking and Steering Maneuvers.” Paper presented at SAE Automotive Engineering Congress Detroit January 1971
- Segel L. Mortimer R. “Driver Braking Performance as a Function of Pedal-Force and Pedal-Displacement Levels.” “1970 International Automobile Safety Conference Compendium,” New York Society of Automotive Engineers, Inc. 1967 paper 700364