This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Braking Performance Requirements for Buses, Trucks, and Tractor-Trailers
Annotation ability available
Sector:
Language:
English
Abstract
This paper reports the results of a study which had as its aim the determination of braking performance currently achievable by buses, trucks, and tractor-trailers, and the improvement of this performance by use of advanced braking systems. Both vehicle testing and analytical techniques, including dynamic modeling and simulation, were used in the program. Performance qualities essential to braking systems are enumerated, which, when given quantitative definition in the light of performance achievable, can form the basis of rational performance requirements for commercial vehicles.
Recommended Content
Technical Paper | Engineering the Third Generation Econoline |
Technical Paper | Methods for the Objective Description of the Driving Characteristics of Heavy Commercial Vehicles |
Authors
Citation
Murphy, R., Limpert, R., and Segel, L., "Development of Braking Performance Requirements for Buses, Trucks, and Tractor-Trailers," SAE Technical Paper 710046, 1971, https://doi.org/10.4271/710046.Also In
References
- National Highway Safety Bureau, U. S. Department of Transportation June 29 1969
- Eaton W. C. Schreur I. “Brake Proportioning Valve.” Paper 660400 SAE Mid-Year Meeting Detroit June 1966
- Lueck F. E. Gartland W. A. Denholm M. J. “Proportioning Valve to Skid Control-A Logical Progression.” Paper 690456 SAE Mid-Year Meeting Chicago May 1969
- Latvala B. F. Morse R. J. “Adaptive Anti-Lock Braking-A Reality for Air Braked Vehicles,” Paper 700112 SAE Automotive Engineering Congress Detroit January 1970
- Murphy R. W. Limpert R. “Bus, Truck, Tractor-Trailer Braking System Performance,” National Highway Safety Bureau, U.S. Dept. of Transportation March 1971
- Leuzzi V. “Braking of Road Vehicles with Tandem Axle Connected by an Equalizing Bar,” ATZ 59 3 March 1957 58 61
- Strien H. “Computation and Testing of Automotive Brakes,” Technical University Braunschweig, Germany 1949
- Boege A. The Technicians Handbook 2 Friedrich Vieweg Braunschweig, Germany 1965
- Fisher D. “Brake System Component Dynamic Performance Measurement and Analysis,” Paper 700373 SAE Mid-Year Meeting Detroit May 1970
- Steinhilper W. “Determination of the Temperature Characteristics in Friction Brakes and Clutches by Means of an Analog Procedure,” 66 8 228 37 66 12 365 71
- Newcomb T. P. “Temperatures Reached in Friction Clutch Transmissions.” J. Mechanical Engineering Science 2 1970 273 87
- Experimental Studies of Tire Shear Force Mechanics Highway Safety Research Institute, The University of Michigan July 30 1970
- “Road Tire Interaction,” Mechanical Engineering 90 May 1968 49
- “Truck Tire Trends.” SP-244 New York Society of Automotive Engineers, Inc. 1963
- Limpert R. “An Investigation of the Brake Force Distribution on Tractor-Semitrailer Combinations,” Paper 710044 SAE Automotive Engineering Congress Detroit January 1971
- Limpert R. Warner C. Y. “Proportional Braking of Solid Frame Vehicles.” Paper 710047 SAE Automotive Engineering Congress Detroit January 1971
- Endres H. R. Conversion of Energy in Friction Brakes Second Conference on Traffic Safety Oct. 28 Nov. 8 1963 Hamburg, Germany
- Dorner H. “Fundamental Principles for the Calculation of the Braking Potential of Motor Vehicle Brakes During Continuous and Intermittent Application,” 165 1963
- Kreith F. Principles of Heat Transfer International Textbook Company Scranton, Pennsylvania 1965
- Mortimer R. G. et. al. “Brake Force Requirement Study: Driver-Vehicle Braking Performance as a Function of Brake System Design Variables,” National Highway Safety Bureau, U. S. Department of Transportation April 10 1970
- Dugoff H. Murphy R. W. “The Dynamic Performance of Articulated Highway Vehicles-A Review of the State-of-the-Art.” Paper 710223 SAE Automotive Engineering Congress Detroit January 1971
- Dugoff H. Segel L. Ervin R. D. “Measurement of Vehicle Response in Severe Braking and Steering Maneuvers,” Paper 710080 SAE Automotive Engineering Congress Detroit January 1971