This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Designing Extreme Pressure and Limited Slip Gear Oils
Annotation ability available
Sector:
Language:
English
Abstract
The development of extreme pressure and limited slip automotive gear oils requires care in the selection of base stocks and additives in order to achieve the desired balance of performance properties. Considerations involved in selection of extreme pressure agents, corrosion inhibitors, and friction modifiers are enumerated. Of particular interest is the interference of many corrosion inhibitors and friction modifiers with the desirable gear protection properties. Tests are described for use in evaluating the additives, and performance properties of fully formulated oils are shown. The need for a special lubricant for limited slip axles is described.
Authors
Citation
Lowther, H. and Smith, D., "Designing Extreme Pressure and Limited Slip Gear Oils," SAE Technical Paper 700871, 1970, https://doi.org/10.4271/700871.Also In
References
- Witham W. A. “Hypoid Gears, Axles, and Lubricants.” SAE Transactions 32 1937 509 513
- Cunningham E. P. Newcombe J. W. “Gear Product and Application Panorama.” Paper 752B SAE National West Coast Meeting Seattle August 1963
- Stewart A. L. Wildhaber E. “Design, Production, and Application Of The Hypoid Rear-Axle Gear.” SAE Transactions 21 1926 386 411
- Manley L. W. Messina N. V. “Oil Additives-Friend Of The Equipment Designer.” Paper 397A SAE Farm, Construction, and Industrial Machinery Meeting Milwaukee September 1961
- Griswold W. R. “Rear-Axle Design and Lubrication.” API Meeting May 14 1936
- Wolf H. R. “Hypoid-Lubricant Requirements For Passenger Car and Truck Rear Axles.” API Proceedings 20M-20 1939
- McKee S. A. Harrington E. A. McKee T. R. “Load-Carrying Capacity Of Extreme Pressure Lubricants.” SAE Transactions 32 1933 217 223
- Neely G. L. “Extreme Pressure Lubricants Testing.” SAE Transactions 31 1936 293 303
- McKee S. A Bitner F. G. McKee T. R. “Apparatus For Determining Load-Carrying Capacity Of Extreme Pressure Lubricants.” SAE Transactions 28 1933 402 408
- DeArdo A. J. Sargent, L. B. Jr. “A Laboratory Rating Method For E.P. Lubricants.” First American Society Of Lubrication Engineers Gear Symposium January 1959
- Hunstad N. A. Wilkins R. A. Osborne R. E. Davison E. D. “Developing Transaxle Fluid.” Paper 117A SAE International Automobile Engineering Congress and Exposition Detroit January 1960
- Bassett W. B. “Recent Developments In Automotive Gear Lubricants.” SAE Chicago Section May 1947
- Streets R. E. Schwarz C. F. “The Performance Of MIL-L-2105B Gear Oils in Military Equipment.” Paper 154 ASTM Meeting Los Angeles October 1962
- Streets R. E. “Performance Testing Of Gear Lubricants In Military Equipment.” Paper 873 SAE National Fuels & Lubricants Meeting Tulsa November 1956
- ASTM Research Report No. RR25:D2 dated May 1965 and revised March 1967 and its Addendum October 1968
- Potter R. I. Gagliardi J. G. Skutnick W. J. Walthall O. K. “Improved Methods Of Evaluating Modern Gear Lubricants.” Paper 690154 SAE International Automobile Engineering Congress and Exposition Detroit January 1969
- McClintock R. Osborne R. E. “The Effect Of Lubricant Viscosity On Rear Axle Gear and Pinion Bearing Operation.” Journal of ASLE Octobler 1964
- Manley L. W. Messina N. V. “Lubrication Of Automatic Transmissions.” Presented at Eighth International Automobile Technical Congress, The Hague May 1960
- Ubbelhohde L. “Theory Of The Friction Of Lubricated Machine Parts.” Petroleum 7 1912 “Theory Of Friction of Lubricated Machinery.” Eisen Stahl U. 32 1913
- Kelly C. I. “Gas Engine Lubricants and Lubrication.” Journal Institute Petroleum Technology 14 1928
- Kelly B. W. “A New Look At The Scoring Phenomena Of Gears.” Paper 804 SAE National Tractor Meeting Milwaukee September 1952
- Ellis W. E. Hill R. L. Downs E. M. “Breakdown of E. P. Gear Lubricants In Pinion Bearings.” ASLE Meeting Philadelphia April 1961
- Federal Test Method Standard No. 791B “Lubricants, Liquid Fuels, and Related Products; Method of Testing.” January 15 1969
- Manley L. W. “Additives For Lubricating Oils Other Than Motor Oils.” Commercial Chemical Development Association Pocono Manor May 1959
- “1969 Book Of ASTM Standards With Related Material,” October 1969
- Meckel T. N. Quillian, R. D. Jr. “A Study of Gear Lubricants Thermal-Oxidation Degredation Phenomena.” Paper T-38 SAE International Automobile Engineering Congress and Exposition Detroit January 1960
- “Automotive Industries.” March 15 1970
- O'Brien L. J. “Limited Slip Differentials.” First American Society of Lubrication Engineers Gear Symposium January 1959
- Allen J. W. “Lubricants For Limited Slip Differentials.” SAE Transactions 75 1967 660779
- Haviland M. L. Goodwin M. C. Rodgers J. J. “Friction Characteristics of Controlled-Slip Differential Lubricants.” SAE Transactions 75 1967 660778
- Doyle W. P. Henry C. J. Thomas P. R. “A Fundamental Study of Antisquawk Agents.” Paper 774B SAE National Fuels and Lubricants Meeting Tulsa October 1963