This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Influence of Induction and Exhaust System Design on Power Producing Characteristics of Diesel Engines
Annotation ability available
Sector:
Language:
English
Abstract
Engine power production is proportional to weight of air trapped in the combustion chamber. This paper discusses how inlet system restriction, inlet air temperature, and exhaust back pressure influence engine performance. A family of four cycle diesel engines from the naturally aspirated (90 bmep) to the turbocharged-aftercooled (220 bmep) is studied. System limitations are established and future trends in engine design are discussed.
Recommended Content
Authors
Citation
Holler, H., "The Influence of Induction and Exhaust System Design on Power Producing Characteristics of Diesel Engines," SAE Technical Paper 700535, 1970, https://doi.org/10.4271/700535.Also In
References
- Mitchell J. E. “Power Producing Characteristics of Diesel Engines.” “Engineering Know-How in Engine Design-Part 11,” New York Society of Automotive Engineers, Inc. 1963
- McAulay K. J. Wu Tang Chen S. K. Borman G. L. Myers P. S. Uyehara O. A. “Development and Evaluation of the Simulation of the Compression Ignition Engine.” SAE Transactions 74 1965 paper 650451
- “Computers in Internal Combustion Engine Design.” Symposium of Inst. of Mech. Engrs. England 1968
- Holler H G. “Tomorrow's Diesel - What Will it Offer?” “Powerplants for Industrial and Commercial Vehicles-A Look at Tomorrow,” New York Society of Automotive Engineers, Inc. 1965 paper 650479
- Wheeler D. B. “Trends in Size and Weight of Highway Combinations.” Paper 660765 SAE Combination and Transportation Meeting Chicago October 1966
- Singer R. B. Beck N. J. “The Economics of Turbine Powerplants for Trucks.” Paper 690548 SAE National West Coast Meeting Seattle August 1969
- Kubis H. “New M.A.N. 250 HP V8 Truck Diesel Engine.” MTZ Nov. 1 1968
- Welsh H. W. “Future Trends in Energy Conversion Systems.” SAE Transactions 75 1966 paper 660603
- Wallace W. A. Lux F. B. “A Variable Compression Ratio Engine Development.” SAE Transactions 72 1964 paper 762-A
- Miller R. Lieberherr H. U. “The Miller Supercharging System for Diesel and Gas Engines.” CIMAC Internatl. Conf. Proc. 1959
- “Thermal Loading of Diesel Engines.” Symposium of Inst. of Mech. Engrs. England 1964
- Perez J. M. Landen E. W. “Exhaust Emission Characteristics of Precombustion Chamber Engines.” Paper 680421 SAE Mid-Year Meeting Detroit May 1969
- Fosberry R.A.C. Holubecki Z. “Some Considerations of the Effect of Atmospheric Conditions on Performance of Automotive Diesel Engines.” SAE Transactions 75 1966 paper 660744
- Mitchell J. E. “An Evaluation of Aftercooling in Turbocharged Diesel Engine Performance.” SAE Transactions 67 1958 paper 103-A
- Antonsen A. K. “The Development of a Supercharged Medium Speed Two-Cycle Opposed Piston Engine.” ASME paper 56-A-99 1956
- Steiger H. A. “Two-Stroke versus Four-Stroke Cycle, a Report about Tests with Two Otherwise Absolutely Similar Experimental Trunk Piston Diesel Engines of 320 mm Bore.” CIMAC Proceedings 1968
- Eckert B. “Is There a Chance for the Gas Turbine in Motor Vehicles?” 1967 Translation by Scientific Information Consultants 661 Finchley Rd., London, England
- Gonzales D. J. Short D. T. “Some Environmental Control Techniques Affecting Gas Turbine Performance.” ASME paper 64-WA/GTP-10 1964
- Coates G.L.A. Tull E. V. “A Search for the Perfect Engine Air Cleaner.” SAE Transactions 70 1961 paper 305-B
- Drezenes J. J. “Design and Development of Air Intake Silencers and Air Cleaners.” “Engineering Know-How in Engine Design-Part 7,” New York Society of Automotive Engineers, Inc. 1959
- Lorentzen C. C. “Performance Tests of Air Cleaners.” U.S. Army Tank Automotive Center Tech. Rept. 8373 1965
- Sherburn P. E. “Air Cleaner Design-Present and Future.” Paper 690007 SAE Automotive Engineering Congress Detroit January 1969
- Wadman B. W. “Air Cleaners for High Output Engines.” Diesel and Gas Turbine Progress June 1969
- Holzhausen G. “Turbocharging Today and Tomorrow.” Paper 660172 SAE Mid-Year Meeting Detroit June 1966
- Nancarrow J. H. “Influence of Turbocharger Characteristics on Supply of Air for High Speed Diesel Engines.” SAE Transactions 75 1966 paper 660133
- Birmann R. “Aerothermodynamic Considerations in Turbocharging Four and Two Cycle Diesel Engines.” ASME paper 55-OGP-10 1955
- “Symposium on Diesel Engines-Breathing and Combustion.” Inst, of Mech. Engrs. England 1966
- Heubner K. H. McDonald A. T. “Dynamic Model and Measurement Technique for Studying Induction Air Swirl in an Engine Cylinder.” ASME paper 69-WA/DGP-5 1969
- Blair G. P. Goulburn J. R. “An Unsteady Flow Analysis of Exhaust Systems for Multicylinder Automobile Engines.” Paper 690469 SAE Mid-Year Meeting Chicago May 1969
- Benson R. S. “Nonsteady Flows in Engine Gas Exchange Systems.” ASME paper 69-WA/DGP-9 1969
- Priede T. Grover E. C. Lalor N. “Relation between Noise and Basic Structural Vibration of Diesel Engines.” Paper 690450 SAE Mid-Year Meeting Chicago May 1969
- Dwyer M. J. “A Study of Pressure Waves in a Pipe with Reference to Internal Combustion Engine Exhaust Silencers.” Institute of Sound and Vibration Research I.S.A.V. No. 114-University of Southampton England 1964
- Golden B. G. “Wave Phenomena and Conditioning of Induced Air and Exhaust Gas in the Operation of Internal Combustion Engines.” ASME paper 61-OGP-7 1961