This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
State-of-the-Art-Vehicle Impact Testing
Annotation ability available
Sector:
Language:
English
Abstract
Authors
Topic
Citation
Macmillan, R., "State-of-the-Art-Vehicle Impact Testing," SAE Technical Paper 700404, 1970, https://doi.org/10.4271/700404.Also In
References
- Odelgard B. Weman P. “Safety Belts for Motor Cars.” 18 1 20 1957
- Thurlow S.J. “Preliminary note on the first of a series of controlled impact tests on cars.” Road Research Laboratory 1902
- Fiala E. Richter W. “Research Facilities for Road Accidents.” A.T.Z. March 1966 68 3 81 86
- Fiala E. Reidelbach W. “Methods and Facilities for Crash Tests.” A.T.Z. July 1964 66 7 203 209
- Franchini E. “Crash Testing Evolution at Fiat.” S.A.E. paper 660165 Automotive Engineering Congress January 10-14 1966
- Macaulay M.A. Macmillan R.H. “Impact Testing of Vehicle Structures.” FISITA Congress 1968
- Kemp R.N. Neilson I.D. Wall J. Harris J. “Head-on Impact Tests of Three Cars against a Rigid Barrier.” Road Research Laboratory August 1965
- Matsui S. Arai S. Nihonyanagi T. “On Collision Test by Actual Cars.” Tokyo Railway Technical Research Institute Quarterly Report 5 3 September 1964 54 6
- Takada J. “A Brief Report on Car Collisions - Japan.” 7th Stapp Car Crash Conference, Proceedings 1963 66 77
- Hasegawa W. “Studies on the Evaluation Method of energy Absorbing Characteristics of the Vehicle Structure in the Head-on Barrier Collision.” XIII FISITA Congress June 1970
- Duprey M. “Capteurs de displacement relative avec discrimination du sens de displacement.” XIII FISITA Congress June 1970
- Bohlin N.I. “Studies of Three-point Restraint Harness Systems in Full-scale Barrier Crashes and Sled Runs.” Proceedings of 8th Stapp Conference U.S.A. 1964
- Morelli A. “Essais de Collision sur des Maquettes de Vehicles a l'Echelle.” XII FISITA Congress 1968
- Postlethwaite H.E. “Impact Characteristics of Structures in Relation to Automotive Design.” University of Birmingham 1968
- Mills B. Barley G.W. “Simulation Testing by means of Scale Body Models.” XIII FISITA Congress June 1970
- Hall I.H. “The Tensile Properties of Textile Yarns at Very High Strain Rates.” J. of Applied Polymer Science 8 1964 237 256
- Banshoya J. et al. “Development of Energy-Absorbing Steering-Column Assemby for Small Passenger Cars.” S.A.E. Paper No. 670914 11th Stapp Car Crash Conference Proceedings October 10-11 1964 118 128
- Van Laethem R. “A new High-safety glazing for Automobiles and other Vehicles.” 12th Stapp Car Crash Conference 360 386 October 1968
- Bruckner F. Krings H. “The influence of fastening on the impact behaviour of Safety Glass.” 12th Stapp Car Crash Conference 352 359 October 1968
- Aston T.R. “Vehicle Crash Testing: Impact Speed and its Measurement.” MIRA Bulletin 6 November December 1969
- Coermann, Rand Lange W. “Dynamic Testing of Safety Belts.” A.T.Z. August 1968 70 8 280 287
- Elseholz J. “Results of Impact Tests with Cars.” K.F.T. 294 296 October 1968
- Franchini E. “Catapult Crash Testing.” Aspects Techniques de la Securite Routiere No. 20 December 1964 2.1 2.49
- Frere P. “Higher Impact High Impact.” Motor April 20 1968 58 59
- Hamon J. Mauron G. September 1968
- Locati L. “Compartment d' une Voiture dans les Collisions.” Aspects Techniques de la Securite Routiere 17 March 1964 2.1 2.41
- Locati L. Franchini E. “Investigations into Fires Occurring in Car Collisions.” Eleventh FISITA Congress Preprint No. C15 June 12-16 1966
- Macaulay M.A. “A General Description of the New Vehicle Crash Facility.” MIRA Bulletin 2 March April 1968
- Mills C.H.G. “Equipment for Propelling Vehicles to the Crash Barrier and for Extracting Test Results.” MIRA Bulletin 2 March April 1968
- Patleich H. “A Scientific Pursuit of Safety.” The Autocar 113 3361 July 15 1960 80 82
- Reidelbach W. “The “Inner Safety” of Motor-Cars.” FISITA - S.B.I.A. Journee d' Etudes 27 September 1963 12F.3 12F.22
- Slattenschek A Tauffkirchen W. Turk H. “Investigation and Testing of the Car Safety Belt under Accident like Conditions by Means of the Drop-Weight Test.” Materielpruf 8 1 January 1966 19 30