This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Brake System Component Dynamic Performance Measurement and Analysis
ISSN: 0148-7191, e-ISSN: 2688-3627
Published February 01, 1970 by SAE International in United States
Annotation ability available
The results of a comprehensive investigation into the dynamic performance of braking-system components are presented. Typical transient and sinusoidal dynamic response data are illustrated for drum and disc brakes, and rigid and flexible brake lines. Laboratory transient response data for complete brake systems are also presented. A generalized brake-system mathematical model, based on a component by component analysis, is formulated in detail. The utility of this model in the design of antiwheel-lock devices and in human factors braking control investigations is discussed.
|Ground Vehicle Standard||Recommended Practice for Braking, Stability, and Control Performance Test Procedure for Air-Brake-Equipped Trucks and Buses|
|Ground Vehicle Standard||Parking Brake Drawbar Pull Test Procedure - Truck and Bus|
|Technical Paper||Modeling, Simulation and Experimental Analysis of Brake Pedal Feel for Passenger Car|
CitationFisher, D., "Brake System Component Dynamic Performance Measurement and Analysis," SAE Technical Paper 700373, 1970, https://doi.org/10.4271/700373.
- Segel L. and Murphy R., “The Variable Braking Vehicle: Concept and Design.” Paper 31.121, Proceedings, First International Conference on Vehicle Mechanics, Wayne State University, July 1968. Edited by Sachs H. (Swets and Zeitlinger, Amsterdam); copyright 1969.
- Aoki K., “Human Factors in Braking and Fade Phenomena for Heavy Application-Problems to Improve Brake Performance.” Bulletin of JSME, Vol. 3, No. 12 (1960), pp. 587-594.
- Ayoub M. M. and Trombley D. J., “Experimental Determination of an Optimal Foot Pedal Design.” J. of Indust. Eng., Vol. 18, No. 9 (1967), pp. 550-559.
- Segal L. and Mortimer R., “Driver Braking Performance as a Function of Pedal-Force and Pedal-Displacement Levels.” 1970 International Automobile Safety Conference Compendium, P-30, paper 700364. New York: Society of Automotive Engineers, Inc., 1970.
- Aoki K., “Operational Characteristics of Human Being at Brake Control.” J. of Society of Automotive Engrs. of Japan, Vol. 18, No. 3 (March 1964), pp. 196-201.
- Fazekas G. A. G., “Brake Torque.” Automobile Engineer (May 1951), pp. 185-191.
- Starks H. J. H. and Lister R. D., “Experimental Investigation on the Braking Performance of Motor Vehicles.” Proceedings, Paper 1, Automobile Div., Institution of Mech. Engrs. (1954-1955), pp. 31-44.
- Spencer A. R., Spurgeon W. M., and Winge J. L., “Four Tests for Consistency of Automotive Brake Linings.” SAE Transactions, Vol. 75 (1967), paper 660412.
- Lister R. D., “Some Problems of Emergency Braking in Road Vehicles.” Presented at Symposium on Control of Vehicles During Braking and Cornering, Automobile Div., Institution of Mechanical Engrs., London, June 11, 1963.
- Blackburn J. F., Reethof G., and Shearer J. L., “Fluid Power Control.” Cambridge, Mass.: M.I.T. Press, 1960.
- Shapiro A. H., “The Dynamics and Thermodynamics of Compressible Flow.” New York, N. Y.: Ronald Press Co., 1953.
- Hickner G. B. and Howard D. W., “Analog Simulation as a Design Tool for Advanced Braking Concepts.” Paper 700157 presented at SAE Automotive Engineering Congress, Detroit, January 1970.
- Leighton F., “Automatic Brake Control.” Presented at Natl. Conf. on Industrial Hydraulics Meeting, Chicago (Oct. 22-23, 1959), pp. 206-218.
- Ezekiel F. D. and Paynter H. M., “Computer Representations of Engineering Systems Involving Fluid Transients.” Transactions of ASME (November 1957), pp. 1840-1850.
- SAE Standard, Motor Vehicle Brake Fluid - SAE J1703a, SAE Handbook.
- Ker A., “Brake Fluids With Low Moisture Avidity.” SAE Transactions, Vol. 77 (1968), paper 680006.
- SAE Standard, Automotive Brake Hoses - SAE J40d, 1968 SAE Handbook.
- Fisher D. K., “The Optimal Design of an Electrohydraulic Control System Using Hybrid Computation.” SAE Transactions, Vol. 79 (1970), paper 700153.
- Stroh G. B., Lawrence M. H., and Deibel W. T., “Effects of Shoe Force Geometry on Heavy Duty Internal Shoe Brake Performance.” SAE Transactions, Vol. 77 (1968), paper 680432.
- Aldrich F. and Jacko M., “Organic Friction Materials.” Bendix Tech. J. (Spring 1969), pp. 42-54.
- Winge J. L., “Instrumentation and Methods for the Evaluation of Variables in Passenger Car Brakes.” Paper 361-B presented at SAE Summer Meeting, St. Louis, June 1961.
- Wagenfuhrer H., “Coefficient of Friction and Wear Rate in Solid Body Friction.” ATZ, Vol. 70, No. 10 (October 1968), pp. 344-350.
- Parker R. C., “The Disc Brake,” Ninth International FISITA Congress Proceedings, 1962, pp. 49-67.
- Krugel M. and Weber H., “The Brake Parameter of Wheel Brakes as a Function of Speed.” Deutsche Kraftfahrtforschung und Strassenverkehrstechnik, No. 169, 1964.
- Herring J. M., “Mechanism of Brake Fade in Organic Brake Linings.” Paper 670146 presented at SAE Automotive Engineering Congress, Detroit, January 1967.
- Garg D. P. and Rabins M. J., “Effect of Temperature on Moulded Friction Materials.” J. of the Institution of Engrs., Australia, Vol. 37 (March 1965), pp. 83-86.
- Weintraub M. H. and Bernard J. P., “Chemical and Functional Responses to Brake Lining Cure Variations.” SAE Transactions, Vol. 77 (1968), paper 680416.
- Jacko M. G., et al., “Thermal Stability and Fade Characteristics of Friction Materials.” SAE Transactions, Vol. 77 (1968), paper 680417.
- Scafer T. S. and Howard D. W., “Design and Performance Considerations for Passenger Car Anti-Skid Systems.” SAE Transactions, Vol. 77 (1968), paper 680458.
- Evans D. J. and Newcomb T. P., “Temperatures Reached in Braking When the Thermal Properties of Drum or Disc Vary with Temperature.” J. of Mech. Engrg. Sci., Vol. 3, No. 4 (1961), pp. 315-317.
- Newcomb T. P., “Transient Temperatures Attained in Disk Brakes.” Brit. J. of Applied Physics, Vol. 10 (July 1959), pp. 339-340.
- Newcomb T. P., “Transient Temperatures in Brake Drums and Linings.” Paper No. 7, Proceedings, Automobile Div., Institution of Mechanical Engrs. (1958-1959), pp. 227-244.
- Newcomb T. P., “Thermal Aspects of Vehicle Braking.” Automobile Engineer, Vol. 50, No. 7 (July 1960), pp. 288-295.
- Newcomb T. P., “Temperature Reached in Disc Brakes.” J. Mech. Engrg. Sci., Vol. 2, No. 3 (1960), pp. 167-177.
- Noyes R. N. and Vickers P. T., “Prediction of Surface Temperatures in Passenger Car Disc Brakes.” SAE Transactions, Vol. 78 (1969), paper 690457.
- Rusnak R. M., Schwartz H. W., and Coleman W. P., “A Comparison of Thermal Analysis of Rotor Alloys for Automobile Disc Brakes.” SAE Transactions, Vol. 79 (1970), paper 700137.
- Kreith F., “Principles of Heat Transfer.” Scranton, Pa.: International Textbook Co., 1966.
- Fazekas G. A. G., “Temperature Gradients and Heat Stresses in Brake Drums.” SAE Transactions, Vol. 61, 1953.
- Richardson P. D. and Saunders O. A., “Studies of Heat Transfer Associated with a Rotating Disc.” J. Mech. Engrg. Sci., Vol. 5, No. 4 (1963), pp. 336-342.
- Newcomb T. P. and Millner N., “Cooling Rates of Brake Drums and Discs.” Proceedings, Vol. 180, Part 2A, Automobile Div., Institution of Mechanical Engineers, 1965-1966