This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
4000 F Oxidation Resistant Thermal Protection Materials
Annotation ability available
Sector:
Language:
English
Abstract
Coated refractory metals, coated and alloyed graphites, hafnium-tantalum alloys, refractory borides, and stabilized zirconias are considered for the 3600–4000 F high-velocity air environment. Only refractory borides and stabilized zirconias are indicated as offering long duration and reuse capabilities for such high-temperature utilization. Iridium, as coatings on substrates of either graphites or refractory metals, appears attractive for shorter times (less than 1 hr). Environmental evaluation and the need for a theoretical framework to enable the prediction of performance data for such materials are indicated to be major problems facing users and suppliers.
Authors
Citation
Krochmal, J., "4000 F Oxidation Resistant Thermal Protection Materials," SAE Technical Paper 660659, 1966, https://doi.org/10.4271/660659.Also In
References
- Anthony, F. M. Merrihew, F. A. Mistretta, A. L. Dukes, W.H. “Investigation of Feasibility of Utilizing Available Heat Resistant Materials for Hypersonic Leading Edge Applications.” WADC I–IX
- “Air Research and Development Command Technical Symposium.” 9–10 July 1958 Dallas, Texas WADC
- “Materials Symposium,” 13–15 Sept. 1961 Phoenix, Ariz. ASD July 1961
- “Air Force Materials Symposium/1965,” 9–11 June 1965 Miami Beach, Fla.
- Dickinson CD. Seigle, L. L. “Experimental Study of Factors Controlling the Effectiveness of High-Temperature Protective Coatings for Tungsten.” General Telephone and Electronics Laboratories, Inc. Bayside, N. Y. July 15 1963
- Nicholas, M. G. Pranatis, A. L. Dickinson, C. D. Whitman, C. I. “The Analysis of the Basic Factors Involved in the Protection of Tungsten Against Oxidation.” General Telephone and Electronics Laboratories, Inc. Bayside, N. Y. Part I June 1962
- Dickinson C. D. Nicholas, M. “An Analysis of the Basic Factors Involved in the Protection of Tungsten Against Oxidation-Part II Recommended Research Programs and Experimental Study of the Program on Breakaway.” General Telephone and Electronics Laboratories, Inc. Bayside, N. Y. Part II June 1963
- Brett J. Seigle L. L. Berkowitz-Mattuck J. Lement B. Phalen, D. I. Vaughan, D. A. Richard, N. A. Austin, A. E. Schwartz C. M. “Experimental Study of Factors Controlling the Effectiveness of High-Temperature Protective Coatings for Tungsten.” August 1965
- Nolting H. J. Jefferys, R. A. “Oxidation Resistant High-Temperature Protective Coatings for Tungsten.” Thompson Ramo Wooldridge Inc. Cleveland, Ohio May 1963
- Nolting H. J. Jefferys, R. A. “Oxidation Resistant High-Temperature Protective Coatings for Tungsten.” Thompson Ramo Wooldridge Inc. Cleveland, Ohio July 1964
- Gadd, J. D. “Advancement of Protective Coating Systems for Columbium and Tantalum Alloys.” Thompson Ramo Wooldridge Inc. Cleveland, Ohio April 1965
- Ohnysty, B. Stansfield, O. M. Stetson, A. R. Metcalfe, A. G. “Development of Protective Coatings for Tantalum Base Alloys: Task II-Development of Technology Applicable to Coatings Used in the 3000 to 4000 F Temperature Range.” Solar, Division of International Harvester Co. San Diego, Cal. 29 Jan. 1965
- Wimber, R. T. “Development of Protective Coatings for Tantalum Base Alloys.” Solar, Division of International Harvester Co. San Diego, Cal. Part II November 1965
- Criscione, J. M. Mercuri, R. A. Schram, E. P. Smith, A. W. Volk, H. F. “High Temperature Protective Coatings for Graphite.” Union Carbide Corp., Carbon Products Division Parma, Ohio January 1965 Part II
- Rapperport, E. J. Smith, M. F. Wulff, J. Brophy, J. Grant, N. J. Giessen B. C. Taylor, A. Doyle N. “Refractory Metal Constitution Diagrams.” WADD Part II September 1962
- Criscione, J. M. Volk, H. F. Nuss, J. W. Mercuri, R. S. Sarian, S. Meszaros, F. W. “High-Temperature Protective Coatings for Graphite.” Union Carbide Corp., Carbon Products Division Technical Center, Parma, Ohio Part III December 1965
- Kaufman L. Clougherty, E. V. “Investigation of Boride Compounds for Very High-Temperature Applications.” ManLabs, Inc. Part III
- Scala S. M. Gilbert, L. M. AIAA Re-entry Technology Conference Williamsburg and Hampton Va. Oct. 12–14 1964
- Diaconis, N. S. Weber, H. E. Warren, W. R. “Technique for Severe Radiative and Convective Heating Environments for Materials Evaluation.” General Electric Co., RSD Space Science Laboratory Valley Forge, Pa. March 1964 Third Hyper-velocity Technique Symposium Denver, Col.
- Marnoch, K. “High-Temperature Oxidation-Resistant Hafnium-Tantalum Systems.” ASTRO Division of The Marquardt Corp. Van Nuys, Cal. July 1965
- Marnoch, K. “High-Temperature Oxidation-Resistant Hafnium-Tantalum Alloys.” Paper presented at 94th AIME Annual Meeting, Chicago, February 1965; Journal of Metals November 1965 1225 1231
- Hill V. L. Rausch, J. J. “Protective Coatings for Tantalum-Base Alloys.” IIT Research Institute Chicago, Ill. Part II January 1966
- Berkowitz-Mattuck, J. B. Kaufman, L. Clougherty, E. V. Hopper, R. “Comparison of Oxidation Evaluation Tests for Hf-Ta Alloys.”
- Solar, Division of International Harvester Co. Aerojet-General Corp.
- “Report of the Ad Hoc Committee on Refractory Inorganic Nonmetallic Structural Materials,” Materials Advisory Board, Division of Engineering and Industrial Research, National Academy of Sciences, National Research Council Washington, 25, D. C January 1961
- Latva, J. D. “Selection and Fabrication of Ceramics and Intermetallics.” Metal Progress 82 No. 4 October 1962
- Latva, J. D. “Selection and Fabrication of Nonmetallics-Oxides, Beryllides and Silicides.” Metal Progress 82 No. 5 November 1962
- Ramke W. G. Latva, J. D. “Refractory Ceramics and Intermetallic Compounds.” Aerospace Engineering 22 No. 1 January 1963 77 84
- Zeitschand K. J. Criscione, J. M. “Researchand Development on Advanced Graphite Materials, Volume XXX-Oxidation Resistant Graphite Base Composites.” Research Laboratory and Advanced Materials Laboratory, National Carbon Co., Division of Union Carbide Corp. XXX April 1964
- “Improved Graphite Materials for High-Temperature Aerospace Use: Volume II - Development of Graphite-Refractory Composites.” Carbon Products Division, Advanced Materials Laboratory, Lawrenceburg, Term., and Carbon Products Research Laboratory Parma, Ohio II October 1964
- Bell Aerosystems Co. IIT Research Institute
- Shaffer, P. T. B. “Development of Ultra Refractory Materials.” Nov. 6 1959
- McClaine, L. A. “Thermodynamic and Kinetic Studies for a Refractory Materials Program.” Arthur D. Little, Inc. San Francisco, Cal. Part I April 1962
- Kaufman L. Clougherty, E. V. “Investigation of Boride Compounds for Very High-Temperature Applications.” ManLabs, Inc Cambridge, Mass. Part I December 1963
- ManLabs, Inc.
- Weber, B. C. “An Annotated Bibliography of Research on the Structural and Physical Properties of Zirconia.” Metallurgy and Ceramics Research Laboratory November 1964
- Mazdiyasni, K. S. Lynch, C. T. Smith, J. S. “Stabilization of Yttria-Zirconia at Very Low Temperatures.” Paper presented at 68th Annual Meeting, American Ceramic Society, Washington, D. C May 1966
- Tanzilli, R. A. “Evaluation of Graphite Composites in Re-entry Environments.” Re-entry Systems Department, General Electric Co. Philadelphia, Pa. October 1965
- ManLabs, Inc.